RTC_FLAG_TAMP3F |
TAMPER3 detection Flag. If set, tamper detection event is detected on tamper input 3
|
RTC_FLAG_TAMP2F |
TAMPER2 detection Flag. If set, tamper detection event is detected on tamper input 2
|
RTC_FLAG_TAMP1F |
TAMPER1 detection Flag. If set, tamper detection event is detected on tamper input 1
|
RTC_FLAG_WUTF |
Wake up Timer Flag. If set, the Wake Up down counter reaches 0
|
RTC_FLAG_ALRAF |
Alarm A Flag. If set, the Time/Date registers matches Alarm A registers
|
RTC_FLAG_INITF |
Initialisation Flag. If set,Calender registers has been initialized
|
RTC_FLAG_RSF |
Registers Synchronization Flag. If set,Calender registers synchronized
|
RTC_FLAG_INITS |
Initialisation Status Flag. If set,Calender update is allowed
|
RTC_FLAG_SHPF |
Shift operation pending Flag. This flag is set by hardware as soon as a shift operation is initiated by a write to the RTC_SHIFTRL. It is cleared by hardware as soon as the corresponding shift operation has completed.
|
RTC_FLAG_WUTWF |
Wake up Timer write Flag. If set, Wake up Timer update is allowed
|
RTC_FLAG_RECALPF |
Recalibration pending Flag, The status flag RECALPF is automatically set to �1� when software writes to the register RTC_CALRL, indicating that the RTC_CALRx registers are blocked. When the new calibration settings are taken into account, this Flag returns by hardware to �0�.
|
RTC_FLAG_ALRAWF |
Alarm A write Flag. If set, Alarm A update is allowed
|