STM8L15x Standard Peripherals Drivers
|
Output Compare management functions. More...
Modules | |
Input Capture management functions | |
Input Capture management functions. | |
Interrupts DMA and flags management functions | |
Interrupts, DMA and flags management functions. | |
Clocks management functions | |
Clocks management functions. | |
Synchronization management functions | |
Synchronization management functions. | |
Specific interface management functions | |
Specific interface management functions. | |
Functions | |
static void | TI1_Config (TIM3_ICPolarity_TypeDef TIM3_ICPolarity, TIM3_ICSelection_TypeDef TIM3_ICSelection, uint8_t TIM3_ICFilter) |
Configure the TI1 as Input. | |
static void | TI2_Config (TIM3_ICPolarity_TypeDef TIM3_ICPolarity, TIM3_ICSelection_TypeDef TIM3_ICSelection, uint8_t TIM3_ICFilter) |
Configure the TI2 as Input. | |
void | TIM3_BKRConfig (TIM3_OSSIState_TypeDef TIM3_OSSIState, TIM3_LockLevel_TypeDef TIM3_LockLevel, TIM3_BreakState_TypeDef TIM3_BreakState, TIM3_BreakPolarity_TypeDef TIM3_BreakPolarity, TIM3_AutomaticOutput_TypeDef TIM3_AutomaticOutput) |
Configures the Break feature, dead time, Lock level, the OSSI, and the AOE(automatic output enable). | |
void | TIM3_CCxCmd (TIM3_Channel_TypeDef TIM3_Channel, FunctionalState NewState) |
Enables or disables the TIM3 Capture Compare Channel x. | |
void | TIM3_CtrlPWMOutputs (FunctionalState NewState) |
Enables or disables the TIM3 peripheral Main Outputs. | |
void | TIM3_ForcedOC1Config (TIM3_ForcedAction_TypeDef TIM3_ForcedAction) |
Forces the TIM3 Channel1 output waveform to active or inactive level. | |
void | TIM3_ForcedOC2Config (TIM3_ForcedAction_TypeDef TIM3_ForcedAction) |
Forces the TIM3 Channel2 output waveform to active or inactive level. | |
void | TIM3_OC1FastConfig (FunctionalState NewState) |
Configures the TIM3 Capture Compare 1 Fast feature. | |
void | TIM3_OC1Init (TIM3_OCMode_TypeDef TIM3_OCMode, TIM3_OutputState_TypeDef TIM3_OutputState, uint16_t TIM3_Pulse, TIM3_OCPolarity_TypeDef TIM3_OCPolarity, TIM3_OCIdleState_TypeDef TIM3_OCIdleState) |
Initializes the TIM3 Channel1 according to the specified parameters. | |
void | TIM3_OC1PolarityConfig (TIM3_OCPolarity_TypeDef TIM3_OCPolarity) |
Configures the TIM3 Channel 1 polarity. | |
void | TIM3_OC1PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM3 peripheral Preload Register on CCR1. | |
void | TIM3_OC2FastConfig (FunctionalState NewState) |
Configures the TIM3 Capture Compare 2 Fast feature. | |
void | TIM3_OC2Init (TIM3_OCMode_TypeDef TIM3_OCMode, TIM3_OutputState_TypeDef TIM3_OutputState, uint16_t TIM3_Pulse, TIM3_OCPolarity_TypeDef TIM3_OCPolarity, TIM3_OCIdleState_TypeDef TIM3_OCIdleState) |
Initializes the TIM3 Channel2 according to the specified parameters. | |
void | TIM3_OC2PolarityConfig (TIM3_OCPolarity_TypeDef TIM3_OCPolarity) |
Configures the TIM3 Channel 2 polarity. | |
void | TIM3_OC2PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM3 peripheral Preload Register on CCR2. | |
void | TIM3_SelectOCxM (TIM3_Channel_TypeDef TIM3_Channel, TIM3_OCMode_TypeDef TIM3_OCMode) |
Selects the TIM3 Output Compare Mode. | |
void | TIM3_SetCompare1 (uint16_t Compare) |
Sets the TIM3 Capture Compare1 Register value. | |
void | TIM3_SetCompare2 (uint16_t Compare) |
Sets the TIM3 Capture Compare2 Register value. |
Detailed Description
Output Compare management functions.
=============================================================================== Output Compare management functions =============================================================================== =================================================================== TIM3 Driver: how to use it in Output Compare Mode =================================================================== To use the Timer in Output Compare mode, the following steps are mandatory: 1. Enable TIM3 clock using CLK_PeripheralClockConfig(CLK_Peripheral_TIM3, ENABLE) function. 2. Configure the TIM3 pins in output mode by configuring the corresponding GPIO pins 3. Configure the Time base unit as described in the first part of this driver, if needed, otherwise the Timer will run with the default configuration: - Autoreload value = 0xFFFF - Prescaler value = 0x0000 - Counter mode = Up counting 4. Call TIM3_OCxInit() to configure the channel x with the desired parameters including: - TIM3 Output Compare mode: TIM3_OCMode - TIM3 Output State: TIM3_OutputState - TIM3 Pulse value: TIM3_Pulse - TIM3 Output Compare Polarity: TIM3_OCPolarity - TIM3 Output Idle State: TIM3_OCIdleState 5. Call the TIM3_Cmd(ENABLE) function to enable the TIM3 counter. Note1: All other functions can be used separately to modify, if needed, a specific feature of the Timer. Note2: If the corresponding interrupt or DMA request are needed, the user should: 1. Enable global interrupts (or the DMA) to use the TIM3 interrupts (or DMA requests). 2. Enable the corresponding interrupt (or DMA request) using the function TIM3_ITConfig(TIM3_IT_CCx) (or TIM3_DMACmd(TIM3_DMASource_CCx))
Function Documentation
static void TI1_Config | ( | TIM3_ICPolarity_TypeDef | TIM3_ICPolarity, |
TIM3_ICSelection_TypeDef | TIM3_ICSelection, | ||
uint8_t | TIM3_ICFilter | ||
) | [static] |
Configure the TI1 as Input.
Definition at line 2044 of file stm8l15x_tim3.c.
References IS_TIM3_IC_FILTER, IS_TIM3_IC_POLARITY, IS_TIM3_IC_SELECTION, TIM3, TIM3_ICPolarity_Falling, TIM_CCER1_CC1E, TIM_CCER1_CC1P, TIM_CCMR_CCxS, and TIM_CCMR_ICxF.
Referenced by TIM3_ICInit(), TIM3_PWMIConfig(), and TIM3_TIxExternalClockConfig().
static void TI2_Config | ( | TIM3_ICPolarity_TypeDef | TIM3_ICPolarity, |
TIM3_ICSelection_TypeDef | TIM3_ICSelection, | ||
uint8_t | TIM3_ICFilter | ||
) | [static] |
Configure the TI2 as Input.
Definition at line 2095 of file stm8l15x_tim3.c.
References IS_TIM3_IC_FILTER, IS_TIM3_IC_POLARITY, IS_TIM3_IC_SELECTION, TIM3, TIM3_ICPolarity_Falling, TIM_CCER1_CC2E, TIM_CCER1_CC2P, TIM_CCMR_CCxS, and TIM_CCMR_ICxF.
Referenced by TIM3_ICInit(), TIM3_PWMIConfig(), and TIM3_TIxExternalClockConfig().
void TIM3_BKRConfig | ( | TIM3_OSSIState_TypeDef | TIM3_OSSIState, |
TIM3_LockLevel_TypeDef | TIM3_LockLevel, | ||
TIM3_BreakState_TypeDef | TIM3_BreakState, | ||
TIM3_BreakPolarity_TypeDef | TIM3_BreakPolarity, | ||
TIM3_AutomaticOutput_TypeDef | TIM3_AutomaticOutput | ||
) |
Configures the Break feature, dead time, Lock level, the OSSI, and the AOE(automatic output enable).
Definition at line 748 of file stm8l15x_tim3.c.
References IS_TIM3_AUTOMATIC_OUTPUT_STATE, IS_TIM3_BREAK_POLARITY, IS_TIM3_BREAK_STATE, IS_TIM3_LOCK_LEVEL, IS_TIM3_OSSI_STATE, and TIM3.
void TIM3_CCxCmd | ( | TIM3_Channel_TypeDef | TIM3_Channel, |
FunctionalState | NewState | ||
) |
Enables or disables the TIM3 Capture Compare Channel x.
Definition at line 1068 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, IS_TIM3_CHANNEL, TIM3, TIM3_Channel_1, TIM_CCER1_CC1E, and TIM_CCER1_CC2E.
void TIM3_CtrlPWMOutputs | ( | FunctionalState | NewState | ) |
Enables or disables the TIM3 peripheral Main Outputs.
Definition at line 777 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, TIM3, and TIM_BKR_MOE.
void TIM3_ForcedOC1Config | ( | TIM3_ForcedAction_TypeDef | TIM3_ForcedAction | ) |
Forces the TIM3 Channel1 output waveform to active or inactive level.
Definition at line 877 of file stm8l15x_tim3.c.
References IS_TIM3_FORCED_ACTION, TIM3, and TIM_CCMR_OCM.
void TIM3_ForcedOC2Config | ( | TIM3_ForcedAction_TypeDef | TIM3_ForcedAction | ) |
Forces the TIM3 Channel2 output waveform to active or inactive level.
Definition at line 903 of file stm8l15x_tim3.c.
References IS_TIM3_FORCED_ACTION, TIM3, and TIM_CCMR_OCM.
void TIM3_OC1FastConfig | ( | FunctionalState | NewState | ) |
Configures the TIM3 Capture Compare 1 Fast feature.
Definition at line 971 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, TIM3, and TIM_CCMR_OCxFE.
void TIM3_OC1Init | ( | TIM3_OCMode_TypeDef | TIM3_OCMode, |
TIM3_OutputState_TypeDef | TIM3_OutputState, | ||
uint16_t | TIM3_Pulse, | ||
TIM3_OCPolarity_TypeDef | TIM3_OCPolarity, | ||
TIM3_OCIdleState_TypeDef | TIM3_OCIdleState | ||
) |
Initializes the TIM3 Channel1 according to the specified parameters.
Definition at line 572 of file stm8l15x_tim3.c.
References IS_TIM3_OC_MODE, IS_TIM3_OC_POLARITY, IS_TIM3_OCIDLE_STATE, IS_TIM3_OUTPUT_STATE, TIM3, TIM3_OCIdleState_Set, TIM3_OCPolarity_Low, TIM3_OutputState_Enable, TIM_CCER1_CC1E, TIM_CCER1_CC1P, TIM_CCMR_OCM, and TIM_OISR_OIS1.
void TIM3_OC1PolarityConfig | ( | TIM3_OCPolarity_TypeDef | TIM3_OCPolarity | ) |
Configures the TIM3 Channel 1 polarity.
Definition at line 1018 of file stm8l15x_tim3.c.
References IS_TIM3_OC_POLARITY, TIM3, TIM3_OCPolarity_Low, and TIM_CCER1_CC1P.
void TIM3_OC1PreloadConfig | ( | FunctionalState | NewState | ) |
Enables or disables the TIM3 peripheral Preload Register on CCR1.
Definition at line 927 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, TIM3, and TIM_CCMR_OCxPE.
void TIM3_OC2FastConfig | ( | FunctionalState | NewState | ) |
Configures the TIM3 Capture Compare 2 Fast feature.
Definition at line 994 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, TIM3, and TIM_CCMR_OCxFE.
void TIM3_OC2Init | ( | TIM3_OCMode_TypeDef | TIM3_OCMode, |
TIM3_OutputState_TypeDef | TIM3_OutputState, | ||
uint16_t | TIM3_Pulse, | ||
TIM3_OCPolarity_TypeDef | TIM3_OCPolarity, | ||
TIM3_OCIdleState_TypeDef | TIM3_OCIdleState | ||
) |
Initializes the TIM3 Channel2 according to the specified parameters.
Definition at line 658 of file stm8l15x_tim3.c.
References IS_TIM3_OC_MODE, IS_TIM3_OC_POLARITY, IS_TIM3_OCIDLE_STATE, IS_TIM3_OUTPUT_STATE, TIM3, TIM3_OCIdleState_Set, TIM3_OCPolarity_Low, TIM3_OutputState_Enable, TIM_CCER1_CC2E, TIM_CCER1_CC2P, TIM_CCMR_OCM, and TIM_OISR_OIS2.
void TIM3_OC2PolarityConfig | ( | TIM3_OCPolarity_TypeDef | TIM3_OCPolarity | ) |
Configures the TIM3 Channel 2 polarity.
Definition at line 1042 of file stm8l15x_tim3.c.
References IS_TIM3_OC_POLARITY, TIM3, TIM3_OCPolarity_Low, and TIM_CCER1_CC2P.
void TIM3_OC2PreloadConfig | ( | FunctionalState | NewState | ) |
Enables or disables the TIM3 peripheral Preload Register on CCR2.
Definition at line 949 of file stm8l15x_tim3.c.
References DISABLE, IS_FUNCTIONAL_STATE, TIM3, and TIM_CCMR_OCxPE.
void TIM3_SelectOCxM | ( | TIM3_Channel_TypeDef | TIM3_Channel, |
TIM3_OCMode_TypeDef | TIM3_OCMode | ||
) |
Selects the TIM3 Output Compare Mode.
This function disables the selected channel before changing the Output Compare Mode. User has to enable this channel using TIM3_CCxCmd and TIM3_CCxNCmd functions.
Definition at line 812 of file stm8l15x_tim3.c.
References IS_TIM3_CHANNEL, IS_TIM3_OCM, TIM3, TIM3_Channel_1, TIM_CCER1_CC1E, TIM_CCER1_CC2E, and TIM_CCMR_OCM.
void TIM3_SetCompare1 | ( | uint16_t | Compare | ) |
Sets the TIM3 Capture Compare1 Register value.
Definition at line 849 of file stm8l15x_tim3.c.
References TIM3.
void TIM3_SetCompare2 | ( | uint16_t | Compare | ) |
Sets the TIM3 Capture Compare2 Register value.
Definition at line 862 of file stm8l15x_tim3.c.
References TIM3.