STM8L15x Standard Peripherals Drivers
|
stm8l15x_tim1.c File Reference
This file provides firmware functions to manage the following functionalities of the TIM1 peripheral:
- TimeBase management
- Output Compare management
- Input Capture management
- Interrupts, DMA and flags management
- Clocks management
- Synchronization management
- Specific interface management.
#include "stm8l15x_tim1.h"
Go to the source code of this file.
Functions | |
static void | TI1_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter) |
Configure the TI1 as Input. | |
static void | TI2_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter) |
Configure the TI2 as Input. | |
static void | TI3_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter) |
Configure the TI3 as Input. | |
static void | TI4_Config (uint8_t TIM1_ICPolarity, uint8_t TIM1_ICSelection, uint8_t TIM1_ICFilter) |
Configure the TI4 as Input. | |
void | TIM1_ARRPreloadConfig (FunctionalState NewState) |
Enables or disables TIM1 peripheral Preload register on ARR. | |
void | TIM1_BDTRConfig (TIM1_OSSIState_TypeDef TIM1_OSSIState, TIM1_LockLevel_TypeDef TIM1_LockLevel, uint8_t TIM1_DeadTime, TIM1_BreakState_TypeDef TIM1_Break, TIM1_BreakPolarity_TypeDef TIM1_BreakPolarity, TIM1_AutomaticOutput_TypeDef TIM1_AutomaticOutput) |
Configures the Break feature, dead time, Lock level, the OSSI, and the AOE(automatic output enable). | |
void | TIM1_CCPreloadControl (FunctionalState NewState) |
Sets or Resets the TIM1 peripheral Capture Compare Preload Control bit. | |
void | TIM1_CCxCmd (TIM1_Channel_TypeDef TIM1_Channel, FunctionalState NewState) |
Enables or disables the TIM1 Capture Compare Channel x (x=1,..,4). | |
void | TIM1_CCxNCmd (TIM1_Channel_TypeDef TIM1_Channel, FunctionalState NewState) |
Enables or disables the TIM1 Capture Compare Channel xN (xN=1,..,3). | |
void | TIM1_ClearFlag (TIM1_FLAG_TypeDef TIM1_FLAG) |
Clears the TIM1�s pending flags. | |
void | TIM1_ClearITPendingBit (TIM1_IT_TypeDef TIM1_IT) |
Clears the TIM1's interrupt pending bits. | |
void | TIM1_ClearOC1Ref (FunctionalState NewState) |
Clears or safeguards the OC1REF signal. | |
void | TIM1_ClearOC2Ref (FunctionalState NewState) |
Clears or safeguards the OC2REF signal. | |
void | TIM1_ClearOC3Ref (FunctionalState NewState) |
Clears or safeguards the OC3REF signal. | |
void | TIM1_ClearOC4Ref (FunctionalState NewState) |
Clears or safeguards the OC4REF signal. | |
void | TIM1_Cmd (FunctionalState NewState) |
Enables or disables the TIM1 peripheral. | |
void | TIM1_CounterModeConfig (TIM1_CounterMode_TypeDef TIM1_CounterMode) |
Specifies the TIM1 Counter Mode to be used. | |
void | TIM1_CtrlPWMOutputs (FunctionalState NewState) |
Enables or disables the TIM1 peripheral Main Outputs. | |
void | TIM1_DeInit (void) |
Deinitializes the TIM1 peripheral registers to their default reset values. | |
void | TIM1_DMACmd (TIM1_DMASource_TypeDef TIM1_DMASource, FunctionalState NewState) |
Enables or disables the TIM�s DMA Requests. | |
void | TIM1_DMAConfig (TIM1_DMABase_TypeDef TIM1_DMABase, TIM1_DMABurstLength_TypeDef TIM1_DMABurstLength) |
Configures the TIM1�s DMA interface. | |
void | TIM1_EncoderInterfaceConfig (TIM1_EncoderMode_TypeDef TIM1_EncoderMode, TIM1_ICPolarity_TypeDef TIM1_IC1Polarity, TIM1_ICPolarity_TypeDef TIM1_IC2Polarity) |
Configures the TIM1 Encoder Interface. | |
void | TIM1_ETRClockMode1Config (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM1 External clock Mode1. | |
void | TIM1_ETRClockMode2Config (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM1 External clock Mode2. | |
void | TIM1_ETRConfig (TIM1_ExtTRGPSC_TypeDef TIM1_ExtTRGPrescaler, TIM1_ExtTRGPolarity_TypeDef TIM1_ExtTRGPolarity, uint8_t ExtTRGFilter) |
Configures the TIM1 External Trigger. | |
void | TIM1_ForcedOC1Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction) |
Forces the TIM1 Channel1 output waveform to active or inactive level. | |
void | TIM1_ForcedOC2Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction) |
Forces the TIM1 Channel2 output waveform to active or inactive level. | |
void | TIM1_ForcedOC3Config (TIM1_ForcedAction_TypeDef TIM1_ForcedAction) |
Forces the TIM1 Channel3 output waveform to active or inactive level. | |
void | TIM1_GenerateEvent (TIM1_EventSource_TypeDef TIM1_EventSource) |
Configures the TIM1 event to be generated by software. | |
uint16_t | TIM1_GetCapture1 (void) |
Gets the TIM1 Input Capture 1 value. | |
uint16_t | TIM1_GetCapture2 (void) |
Gets the TIM1 Input Capture 2 value. | |
uint16_t | TIM1_GetCapture3 (void) |
Gets the TIM1 Input Capture 3 value. | |
uint16_t | TIM1_GetCapture4 (void) |
Gets the TIM1 Input Capture 4 value. | |
uint16_t | TIM1_GetCounter (void) |
Gets the TIM1 Counter value. | |
FlagStatus | TIM1_GetFlagStatus (TIM1_FLAG_TypeDef TIM1_FLAG) |
Checks whether the specified TIM1 flag is set or not. | |
ITStatus | TIM1_GetITStatus (TIM1_IT_TypeDef TIM1_IT) |
Checks whether the TIM1 interrupt has occurred or not. | |
uint16_t | TIM1_GetPrescaler (void) |
Gets the TIM1 Prescaler value. | |
void | TIM1_ICInit (TIM1_Channel_TypeDef TIM1_Channel, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, TIM1_ICSelection_TypeDef TIM1_ICSelection, TIM1_ICPSC_TypeDef TIM1_ICPrescaler, uint8_t TIM1_ICFilter) |
Initializes the TIM1 peripheral according to the specified parameters. | |
void | TIM1_InternalClockConfig (void) |
Configures the TIM1 internal Clock. | |
void | TIM1_ITConfig (TIM1_IT_TypeDef TIM1_IT, FunctionalState NewState) |
Enables or disables the specified TIM1 interrupts. | |
void | TIM1_OC1FastConfig (FunctionalState NewState) |
Configures the TIM1 Capture Compare 1 Fast feature. | |
void | TIM1_OC1Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState) |
Initializes the TIM1 Channel1 according to the specified parameters. | |
void | TIM1_OC1NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity) |
Configures the TIM1 Channel 1N polarity. | |
void | TIM1_OC1PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity) |
Configures the TIM1 Channel 1 polarity. | |
void | TIM1_OC1PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM1 peripheral Preload Register on CCR1. | |
void | TIM1_OC2FastConfig (FunctionalState NewState) |
Configures the TIM1 Capture Compare 2 Fast feature. | |
void | TIM1_OC2Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState) |
Initializes the TIM1 Channel2 according to the specified parameters. | |
void | TIM1_OC2NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity) |
Configures the TIM1 Channel 2N polarity. | |
void | TIM1_OC2PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity) |
Configures the TIM1 Channel 2 polarity. | |
void | TIM1_OC2PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM1 peripheral Preload Register on CCR2. | |
void | TIM1_OC3FastConfig (FunctionalState NewState) |
Configures the TIM1 Capture Compare 3 Fast feature. | |
void | TIM1_OC3Init (TIM1_OCMode_TypeDef TIM1_OCMode, TIM1_OutputState_TypeDef TIM1_OutputState, TIM1_OutputNState_TypeDef TIM1_OutputNState, uint16_t TIM1_Pulse, TIM1_OCPolarity_TypeDef TIM1_OCPolarity, TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity, TIM1_OCIdleState_TypeDef TIM1_OCIdleState, TIM1_OCNIdleState_TypeDef TIM1_OCNIdleState) |
Initializes the TIM1 Channel3 according to the specified parameters. | |
void | TIM1_OC3NPolarityConfig (TIM1_OCNPolarity_TypeDef TIM1_OCNPolarity) |
Configures the TIM1 Channel 3N polarity. | |
void | TIM1_OC3PolarityConfig (TIM1_OCPolarity_TypeDef TIM1_OCPolarity) |
Configures the TIM1 Channel 3 polarity. | |
void | TIM1_OC3PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM1 peripheral Preload Register on CCR3. | |
void | TIM1_OC4PreloadConfig (FunctionalState NewState) |
Enables or disables the TIM1 peripheral Preload Register on CCR4. | |
void | TIM1_PrescalerConfig (uint16_t Prescaler, TIM1_PSCReloadMode_TypeDef TIM1_PSCReloadMode) |
Configures the TIM1 Prescaler. | |
void | TIM1_PWMIConfig (TIM1_Channel_TypeDef TIM1_Channel, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, TIM1_ICSelection_TypeDef TIM1_ICSelection, TIM1_ICPSC_TypeDef TIM1_ICPrescaler, uint8_t TIM1_ICFilter) |
Configures the TIM1 peripheral in PWM Input Mode according to the specified parameters. | |
void | TIM1_SelectCCDMA (FunctionalState NewState) |
Selects the TIM1 peripheral Capture Compare DMA source. | |
void | TIM1_SelectCOM (FunctionalState NewState) |
Selects the TIM1 peripheral Commutation event. | |
void | TIM1_SelectHallSensor (FunctionalState NewState) |
Enables or Disables the TIM�s Hall sensor interface. | |
void | TIM1_SelectInputTrigger (TIM1_TRGSelection_TypeDef TIM1_InputTriggerSource) |
Selects the TIM1 Input Trigger source. | |
void | TIM1_SelectMasterSlaveMode (FunctionalState NewState) |
Sets or Resets the TIM1 Master/Slave Mode. | |
void | TIM1_SelectOCREFClear (TIM1_OCReferenceClear_TypeDef TIM1_OCReferenceClear) |
Selects the OCReference Clear source. | |
void | TIM1_SelectOCxM (TIM1_Channel_TypeDef TIM1_Channel, TIM1_OCMode_TypeDef TIM1_OCMode) |
Selects the TIM1 Output Compare Mode. | |
void | TIM1_SelectOnePulseMode (TIM1_OPMode_TypeDef TIM1_OPMode) |
Selects the TIM1�s One Pulse Mode. | |
void | TIM1_SelectOutputTrigger (TIM1_TRGOSource_TypeDef TIM1_TRGOSource) |
Selects the TIM1 Trigger Output Mode. | |
void | TIM1_SelectSlaveMode (TIM1_SlaveMode_TypeDef TIM1_SlaveMode) |
Selects the TIM1 Slave Mode. | |
void | TIM1_SetAutoreload (uint16_t Autoreload) |
Sets the TIM1 Autoreload Register value. | |
void | TIM1_SetCompare1 (uint16_t Compare1) |
Sets the TIM1 Capture Compare1 Register value. | |
void | TIM1_SetCompare2 (uint16_t Compare2) |
Sets the TIM1 Capture Compare2 Register value. | |
void | TIM1_SetCompare3 (uint16_t Compare3) |
Sets the TIM1 Capture Compare3 Register value. | |
void | TIM1_SetCompare4 (uint16_t Compare4) |
Sets the TIM1 Capture Compare4 Register value. | |
void | TIM1_SetCounter (uint16_t Counter) |
Sets the TIM1 Counter Register value. | |
void | TIM1_SetIC1Prescaler (TIM1_ICPSC_TypeDef TIM1_IC1Prescaler) |
Sets the TIM1 Input Capture 1 prescaler. | |
void | TIM1_SetIC2Prescaler (TIM1_ICPSC_TypeDef TIM1_IC2Prescaler) |
Sets the TIM1 Input Capture 2 prescaler. | |
void | TIM1_SetIC3Prescaler (TIM1_ICPSC_TypeDef TIM1_IC3Prescaler) |
Sets the TIM1 Input Capture 3 prescaler. | |
void | TIM1_SetIC4Prescaler (TIM1_ICPSC_TypeDef TIM1_IC4Prescaler) |
Sets the TIM1 Input Capture 4 prescaler. | |
void | TIM1_TimeBaseInit (uint16_t TIM1_Prescaler, TIM1_CounterMode_TypeDef TIM1_CounterMode, uint16_t TIM1_Period, uint8_t TIM1_RepetitionCounter) |
Initializes the TIM1 Time Base Unit according to the specified parameters. | |
void | TIM1_TIxExternalClockConfig (TIM1_TIxExternalCLK1Source_TypeDef TIM1_TIxExternalCLKSource, TIM1_ICPolarity_TypeDef TIM1_ICPolarity, uint8_t ICFilter) |
Configures the TIM1 Trigger as External Clock. | |
void | TIM1_UpdateDisableConfig (FunctionalState NewState) |
Enables or Disables the TIM1 Update event. | |
void | TIM1_UpdateRequestConfig (TIM1_UpdateSource_TypeDef TIM1_UpdateSource) |
Selects the TIM1 Update Request Interrupt source. |
Detailed Description
This file provides firmware functions to manage the following functionalities of the TIM1 peripheral:
- TimeBase management
- Output Compare management
- Input Capture management
- Interrupts, DMA and flags management
- Clocks management
- Synchronization management
- Specific interface management.
- Attention:
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm8l15x_tim1.c.