STM8L15x Standard Peripherals Drivers
|
stm8l15x_flash.h File Reference
This file contains all the functions prototypes for the FLASH firmware library. More...
#include "stm8l15x.h"
Go to the source code of this file.
Defines | |
#define | FLASH_DATA_EEPROM_START_PHYSICAL_ADDRESS ((uint32_t)0x00001000) |
#define | FLASH_OPTION_BYTES_END_PHYSICAL_ADDRESS ((uint32_t)0x0000480A) |
#define | FLASH_OPTION_BYTES_START_PHYSICAL_ADDRESS ((uint32_t)0x00004800) |
#define | FLASH_PROGRAM_START_PHYSICAL_ADDRESS ((uint32_t)0x00008000) |
#define | FLASH_RASS_KEY1 ((uint8_t)0x56) |
#define | FLASH_RASS_KEY2 ((uint8_t)0xAE) |
#define | FLASH_READOUTPROTECTION_KEY ((uint8_t)0xAA) |
#define | IS_FLASH_ADDRESS(Address) |
Macro used by the assert function in order to check the different sensitivity values for the data eeprom and flash program Address. | |
#define | IS_FLASH_DATA_EEPROM_ADDRESS(Address) |
Macro used by the assert function in order to check the different sensitivity values for the data Eeprom Address. | |
#define | IS_FLASH_DATA_EEPROM_BLOCK_NUMBER(BlockNum) ((BlockNum) < FLASH_DATA_EEPROM_BLOCKS_NUMBER) |
Macro used by the assert function in order to check the different sensitivity values for the data eeprom Block number. | |
#define | IS_FLASH_FLAGS(FLAG) |
Macro used by the assert function in order to check the different flags values. | |
#define | IS_FLASH_MEMORY_TYPE(MemType) |
Macro used by the assert function in order to check the different sensitivity values for the flash memory type. | |
#define | IS_FLASH_POWER(Power) |
Macro used by the assert function in order to check the power mode. | |
#define | IS_FLASH_POWERSTATUS(PowerStatus) |
Macro used by the assert function in order to check the power status during wait and run modes. | |
#define | IS_FLASH_PROGRAM_ADDRESS(Address) |
Macro used by the assert function in order to check the different sensitivity values for the flash Address. | |
#define | IS_FLASH_PROGRAM_BLOCK_NUMBER(BlockNum) ((BlockNum) < FLASH_PROGRAM_BLOCKS_NUMBER) |
Macro used by the assert function in order to check the different sensitivity values for the flash Block number. | |
#define | IS_FLASH_PROGRAM_MODE(Mode) |
Macro used by the assert function in order to check the different sensitivity values for the flash program block mode. | |
#define | IS_FLASH_PROGRAM_TIME(Time) |
Macro used by the assert function in order to check the program time mode. | |
#define | IS_OPTION_BYTE_ADDRESS(ADDRESS) |
Macro used by the assert function in order to check the different sensitivity values for the option bytes Address. | |
Enumerations | |
enum | FLASH_FLAG_TypeDef { FLASH_FLAG_HVOFF = (uint8_t)0x40, FLASH_FLAG_DUL = (uint8_t)0x08, FLASH_FLAG_EOP = (uint8_t)0x04, FLASH_FLAG_PUL = (uint8_t)0x02, FLASH_FLAG_WR_PG_DIS = (uint8_t)0x01 } |
enum | FLASH_MemType_TypeDef { FLASH_MemType_Program = (uint8_t)0xFD, FLASH_MemType_Data = (uint8_t)0xF7 } |
enum | FLASH_Power_TypeDef { FLASH_Power_IDDQ = (uint8_t)0x00, FLASH_Power_On = (uint8_t)0x01 } |
enum | FLASH_PowerStatus_TypeDef { FLASH_PowerStatus_IDDQDuringWaitMode = (uint8_t)0x04, FLASH_PowerStatus_IDDQDuringRunMode = (uint8_t)0x08, FLASH_PowerStatus_IDDQDuringWaitAndRunModes = (uint8_t)0x0C, FLASH_PowerStatus_On = (uint8_t)0x00 } |
enum | FLASH_ProgramMode_TypeDef { FLASH_ProgramMode_Standard = (uint8_t)0x00, FLASH_ProgramMode_Fast = (uint8_t)0x10 } |
enum | FLASH_ProgramTime_TypeDef { FLASH_ProgramTime_Standard = (uint8_t)0x00, FLASH_ProgramTime_TProg = (uint8_t)0x01 } |
enum | FLASH_Status_TypeDef { FLASH_Status_Write_Protection_Error = (uint8_t)0x01, FLASH_Status_TimeOut = (uint8_t)0x02, FLASH_Status_Successful_Operation = (uint8_t)0x04 } |
Functions | |
void | FLASH_DeInit (void) |
Deinitializes the FLASH registers to their default reset values. | |
void | FLASH_EraseByte (uint32_t Address) |
Erases one byte in the program or data EEPROM memory. | |
void | FLASH_EraseOptionByte (uint16_t Address) |
Erases option byte. | |
uint16_t | FLASH_GetBootSize (void) |
Returns the Boot memory size in bytes. | |
uint16_t | FLASH_GetCodeSize (void) |
Returns the Code Area size in bytes. | |
FlagStatus | FLASH_GetFlagStatus (FLASH_FLAG_TypeDef FLASH_FLAG) |
Checks whether the specified FLASH flag is set or not. | |
FLASH_ProgramTime_TypeDef | FLASH_GetProgrammingTime (void) |
Returns the fixed programming time. | |
FunctionalState | FLASH_GetReadOutProtectionStatus (void) |
Returns the FLASH Read Out Protection Status. | |
void | FLASH_ITConfig (FunctionalState NewState) |
Enables or Disables the Flash interrupt mode. | |
void | FLASH_Lock (FLASH_MemType_TypeDef FLASH_MemType) |
Locks the program or data EEPROM memory. | |
void | FLASH_PowerWaitModeConfig (FLASH_Power_TypeDef FLASH_Power) |
Configures the power state for Flash program and data EEPROM during wait for interrupt mode. | |
void | FLASH_ProgramByte (uint32_t Address, uint8_t Data) |
Programs one byte in program or data EEPROM memory. | |
void | FLASH_ProgramOptionByte (uint16_t Address, uint8_t Data) |
Programs option byte. | |
void | FLASH_ProgramWord (uint32_t Address, uint32_t Data) |
Programs one word (4 bytes) in program or data EEPROM memory. | |
uint8_t | FLASH_ReadByte (uint32_t Address) |
Reads one byte from flash memory. | |
void | FLASH_SetProgrammingTime (FLASH_ProgramTime_TypeDef FLASH_ProgTime) |
Sets the fixed programming time. | |
void | FLASH_Unlock (FLASH_MemType_TypeDef FLASH_MemType) |
Unlocks the program or data EEPROM memory. | |
IN_RAM (void FLASH_PowerRunModeConfig(FLASH_Power_TypeDef FLASH_Power)) | |
IN_RAM (void FLASH_EraseBlock(uint16_t BlockNum, FLASH_MemType_TypeDef FLASH_MemType)) | |
IN_RAM (void FLASH_ProgramBlock(uint16_t BlockNum, FLASH_MemType_TypeDef FLASH_MemType, FLASH_ProgramMode_TypeDef FLASH_ProgMode, uint8_t *Buffer)) | |
IN_RAM (FLASH_Status_TypeDef FLASH_WaitForLastOperation(FLASH_MemType_TypeDef FLASH_MemType)) | |
IN_RAM (FLASH_PowerStatus_TypeDef FLASH_GetPowerStatus(void)) |
Detailed Description
This file contains all the functions prototypes for the FLASH firmware library.
- Attention:
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm8l15x_flash.h.