stm32h743i_eval_sdram.h

Go to the documentation of this file.

/**
  ******************************************************************************
  * @file    stm32h743i_eval_sdram.h
  * @author  MCD Application Team
  * @version V1.0.0
  * @date    21-April-2017
  * @brief   This file contains the common defines and functions prototypes for
  *          the stm32h743i_eval_sdram.c driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32H743I_EVAL_SDRAM_H
#define __STM32H743I_EVAL_SDRAM_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32h7xx_hal.h"

/** @addtogroup BSP
  * @{
  */

/** @addtogroup STM32H743I_EVAL
  * @{
  */

/** @defgroup STM32H743I_EVAL_SDRAM SDRAM
  * @{
  */

/** @defgroup STM32H743I_EVAL_SDRAM_Exported_Types SDRAM Exported Types
  * @{
  */

/**
  * @brief  SDRAM status structure definition
  */
#define   SDRAM_OK         ((uint8_t)0x00)
#define   SDRAM_ERROR      ((uint8_t)0x01)

/** @defgroup STM32H743I_EVAL_SDRAM_Exported_Constants SDRAM Exported Constants
  * @{
  */
#define SDRAM_DEVICE_ADDR  ((uint32_t)0xD0000000)
#define SDRAM_DEVICE_SIZE  ((uint32_t)0x2000000)  /* SDRAM device size in Bytes (32MB)*/

/* #define SDRAM_MEMORY_WIDTH            FMC_SDRAM_MEM_BUS_WIDTH_8  */
/* #define SDRAM_MEMORY_WIDTH            FMC_SDRAM_MEM_BUS_WIDTH_16 */
#define SDRAM_MEMORY_WIDTH               FMC_SDRAM_MEM_BUS_WIDTH_32

#define SDCLOCK_PERIOD                   FMC_SDRAM_CLOCK_PERIOD_2
/* #define SDCLOCK_PERIOD                FMC_SDRAM_CLOCK_PERIOD_3 */

#define REFRESH_COUNT                    ((uint32_t)0x0603)   /* SDRAM refresh counter (100Mhz FMC clock) */

#define SDRAM_TIMEOUT                    ((uint32_t)0xFFFF)

/* DMA definitions for SDRAM DMA transfer */
#define __MDMAx_CLK_ENABLE                 __HAL_RCC_MDMA_CLK_ENABLE
#define __MDMAx_CLK_DISABLE                __HAL_RCC_MDMA_CLK_DISABLE
#define SDRAM_MDMAx_CHANNEL               MDMA_Channel0
#define SDRAM_MDMAx_IRQn                  MDMA_IRQn

/**
  * @}
  */

/**
  * @brief  FMC SDRAM Mode definition register defines
  */
#define SDRAM_MODEREG_BURST_LENGTH_1             ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_LENGTH_2             ((uint16_t)0x0001)
#define SDRAM_MODEREG_BURST_LENGTH_4             ((uint16_t)0x0002)
#define SDRAM_MODEREG_BURST_LENGTH_8             ((uint16_t)0x0004)
#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL      ((uint16_t)0x0000)
#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED     ((uint16_t)0x0008)
#define SDRAM_MODEREG_CAS_LATENCY_2              ((uint16_t)0x0020)
#define SDRAM_MODEREG_CAS_LATENCY_3              ((uint16_t)0x0030)
#define SDRAM_MODEREG_OPERATING_MODE_STANDARD    ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE     ((uint16_t)0x0200)
/**
  * @}
  */

/** @defgroup STM32H743I_EVAL_SDRAM_Exported_Macro SDRAM Exported Macro
  * @{
  */
/**
  * @}
  */

/** @defgroup STM32H743I_EVAL_SDRAM_Exported_Functions SDRAM Exported Functions
  * @{
  */
uint8_t BSP_SDRAM_Init(void);
uint8_t BSP_SDRAM_DeInit(void);
void    BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount);
uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize);
uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd);

/* These functions can be modified in case the current settings (e.g. DMA stream)
   need to be changed for specific application needs */
void    BSP_SDRAM_MspInit(SDRAM_HandleTypeDef  *hsdram, void *Params);
void    BSP_SDRAM_MspDeInit(SDRAM_HandleTypeDef  *hsdram, void *Params);


/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __STM32H743I_EVAL_SDRAM_H */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/