STM32H743I_EVAL BSP User Manual
|
stm32h743i_eval_nor.h
Go to the documentation of this file.
00001 /** 00002 ****************************************************************************** 00003 * @file stm32h743i_eval_nor.h 00004 * @author MCD Application Team 00005 * @version V1.0.0 00006 * @date 21-April-2017 00007 * @brief This file contains the common defines and functions prototypes for 00008 * the stm32h743i_eval_nor.c driver. 00009 ****************************************************************************** 00010 * @attention 00011 * 00012 * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> 00013 * 00014 * Redistribution and use in source and binary forms, with or without modification, 00015 * are permitted provided that the following conditions are met: 00016 * 1. Redistributions of source code must retain the above copyright notice, 00017 * this list of conditions and the following disclaimer. 00018 * 2. Redistributions in binary form must reproduce the above copyright notice, 00019 * this list of conditions and the following disclaimer in the documentation 00020 * and/or other materials provided with the distribution. 00021 * 3. Neither the name of STMicroelectronics nor the names of its contributors 00022 * may be used to endorse or promote products derived from this software 00023 * without specific prior written permission. 00024 * 00025 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 00026 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 00027 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 00028 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE 00029 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 00030 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 00031 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 00032 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 00033 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 00034 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 00035 * 00036 ****************************************************************************** 00037 */ 00038 00039 /* Define to prevent recursive inclusion -------------------------------------*/ 00040 #ifndef __STM32H743I_EVAL_NOR_H 00041 #define __STM32H743I_EVAL_NOR_H 00042 00043 #ifdef __cplusplus 00044 extern "C" { 00045 #endif 00046 00047 /* Includes ------------------------------------------------------------------*/ 00048 #include "stm32h7xx_hal.h" 00049 00050 /** @addtogroup BSP 00051 * @{ 00052 */ 00053 00054 /** @addtogroup STM32H743I_EVAL 00055 * @{ 00056 */ 00057 00058 /** @defgroup STM32H743I_EVAL_NOR NOR 00059 * @{ 00060 */ 00061 00062 /** @defgroup STM32H743I_EVAL_NOR_Exported_Types NOR Exported Types 00063 * @{ 00064 */ 00065 /** 00066 * @} 00067 */ 00068 00069 /** 00070 * @brief NOR status structure definition 00071 */ 00072 #define NOR_STATUS_OK ((uint8_t)0x00) 00073 #define NOR_STATUS_ERROR ((uint8_t)0x01) 00074 00075 /** @defgroup STM32H743I_EVAL_NOR_Exported_Constants NOR Exported Constants 00076 * @{ 00077 */ 00078 #define NOR_DEVICE_ADDR ((uint32_t)0x60000000) 00079 00080 /* #define NOR_MEMORY_WIDTH FMC_NORSRAM_MEM_BUS_WIDTH_8 */ 00081 #define NOR_MEMORY_WIDTH FMC_NORSRAM_MEM_BUS_WIDTH_16 00082 00083 #define NOR_BURSTACCESS FMC_BURST_ACCESS_MODE_DISABLE 00084 /* #define NOR_BURSTACCESS FMC_BURST_ACCESS_MODE_ENABLE*/ 00085 00086 #define NOR_WRITEBURST FMC_WRITE_BURST_DISABLE 00087 /* #define NOR_WRITEBURST FMC_WRITE_BURST_ENABLE */ 00088 00089 #define CONTINUOUSCLOCK_FEATURE FMC_CONTINUOUS_CLOCK_SYNC_ONLY 00090 /* #define CONTINUOUSCLOCK_FEATURE FMC_CONTINUOUS_CLOCK_SYNC_ASYNC */ 00091 00092 /* NOR operations Timeout definitions */ 00093 #define BLOCKERASE_TIMEOUT ((uint32_t)0x00A00000) /* NOR block erase timeout */ 00094 #define CHIPERASE_TIMEOUT ((uint32_t)0x30000000) /* NOR chip erase timeout */ 00095 #define PROGRAM_TIMEOUT ((uint32_t)0x00004400) /* NOR program timeout */ 00096 00097 /* NOR Ready/Busy signal GPIO definitions */ 00098 #define NOR_READY_BUSY_PIN GPIO_PIN_6 00099 #define NOR_READY_BUSY_GPIO GPIOC 00100 #define NOR_READY_STATE GPIO_PIN_SET 00101 #define NOR_BUSY_STATE GPIO_PIN_RESET 00102 00103 /** 00104 * @} 00105 */ 00106 00107 /** @defgroup STM32H743I_EVAL_NOR_Exported_Macro NOR Exported Macro 00108 * @{ 00109 */ 00110 /** 00111 * @} 00112 */ 00113 00114 /** @defgroup STM32H743I_EVAL_NOR_Exported_Functions NOR Exported Functions 00115 * @{ 00116 */ 00117 uint8_t BSP_NOR_Init(void); 00118 uint8_t BSP_NOR_DeInit(void); 00119 uint8_t BSP_NOR_ReadData(uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize); 00120 uint8_t BSP_NOR_WriteData(uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize); 00121 uint8_t BSP_NOR_ProgramData(uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize); 00122 uint8_t BSP_NOR_Erase_Block(uint32_t BlockAddress); 00123 uint8_t BSP_NOR_Erase_Chip(void); 00124 uint8_t BSP_NOR_Read_ID(NOR_IDTypeDef *pNOR_ID); 00125 void BSP_NOR_ReturnToReadMode(void); 00126 00127 /* These functions can be modified in case the current settings (e.g. DMA stream) 00128 need to be changed for specific application needs */ 00129 void BSP_NOR_MspInit(NOR_HandleTypeDef *hnor, void *Params); 00130 void BSP_NOR_MspDeInit(NOR_HandleTypeDef *hnor, void *Params); 00131 00132 /** 00133 * @} 00134 */ 00135 00136 /** 00137 * @} 00138 */ 00139 00140 /** 00141 * @} 00142 */ 00143 00144 /** 00145 * @} 00146 */ 00147 00148 #ifdef __cplusplus 00149 } 00150 #endif 00151 00152 #endif /* __STM32H743I_EVAL_NOR_H */ 00153 00154 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Generated on Wed Aug 23 2017 17:45:13 for STM32H743I_EVAL BSP User Manual by 1.7.6.1