Functions
uint8_t	BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq)
	Configures the audio Out peripheral.
uint8_t	BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size)
	Starts playing audio stream from a data buffer for a determined size.
void	BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size)
	Sends n-Bytes on the SAI interface.
uint8_t	BSP_AUDIO_OUT_Pause (void)
	This function Pauses the audio file stream.
uint8_t	BSP_AUDIO_OUT_Resume (void)
	Resumes the audio file stream.
uint8_t	BSP_AUDIO_OUT_Stop (uint32_t Option)
	Stops audio playing and Power down the Audio Codec.
uint8_t	BSP_AUDIO_OUT_SetVolume (uint8_t Volume)
	Controls the current audio volume level.
uint8_t	BSP_AUDIO_OUT_SetMute (uint32_t Cmd)
	Enables or disables the MUTE mode by software.
uint8_t	BSP_AUDIO_OUT_SetOutputMode (uint8_t Output)
	Switch dynamically (while audio file is played) the output target (speaker or headphone).
void	BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq)
	Updates the audio frequency.
void	BSP_AUDIO_OUT_SetAudioFrameSlot (uint32_t AudioFrameSlot)
	Updates the Audio frame slot configuration.
void	BSP_AUDIO_OUT_DeInit (void)
	De-initializes the audio out peripheral.
__weak void	BSP_AUDIO_OUT_TransferComplete_CallBack (void)
	Manages the DMA full Transfer complete event.
__weak void	BSP_AUDIO_OUT_HalfTransfer_CallBack (void)
	Manages the DMA Half Transfer complete event.
__weak void	BSP_AUDIO_OUT_Error_CallBack (void)
	Manages the DMA FIFO error event.
__weak void	BSP_AUDIO_OUT_MspInit (SAI_HandleTypeDef hsai, void Params)
	Initializes BSP_AUDIO_OUT MSP.
__weak void	BSP_AUDIO_OUT_MspDeInit (SAI_HandleTypeDef hsai, void Params)
	Deinitializes SAI MSP.
__weak void	BSP_AUDIO_OUT_ClockConfig (SAI_HandleTypeDef hsai, uint32_t AudioFreq, void Params)
	Clock Config.

Function Documentation

void BSP_AUDIO_OUT_ChangeBuffer	(	uint16_t *	pData,
		uint16_t	Size
	)

Sends n-Bytes on the SAI interface.

Parameters:

pData,:	pointer on data address
Size,:	number of data to be written

Return values:

None

Definition at line 370 of file stm32h743i_eval_audio.c.

References haudio_out_sai.

void BSP_AUDIO_OUT_ClockConfig	(	SAI_HandleTypeDef *	hsai,
		uint32_t	AudioFreq,
		void *	Params
	)

Clock Config.

Parameters:

hsai,:	might be required to set audio peripheral predivider if any.
AudioFreq,:	Audio frequency used to play the audio stream.
Params,:	pointer on additional configuration parameters, can be NULL.

Note:: This API is called by BSP_AUDIO_OUT_Init() and BSP_AUDIO_OUT_SetFrequency() Being __weak it can be overwritten by the application

Return values:

None

Definition at line 712 of file stm32h743i_eval_audio.c.

Referenced by BSP_AUDIO_IN_OUT_Init(), BSP_AUDIO_OUT_Init(), and BSP_AUDIO_OUT_SetFrequency().

void BSP_AUDIO_OUT_DeInit ( void )

De-initializes the audio out peripheral.

Return values:

None

Definition at line 564 of file stm32h743i_eval_audio.c.

References BSP_AUDIO_OUT_MspDeInit(), haudio_out_sai, and SAIx_Out_DeInit().

void BSP_AUDIO_OUT_Error_CallBack ( void )

Manages the DMA FIFO error event.

Return values:

None

Definition at line 591 of file stm32h743i_eval_audio.c.

Referenced by HAL_SAI_ErrorCallback().

void BSP_AUDIO_OUT_HalfTransfer_CallBack ( void )

Manages the DMA Half Transfer complete event.

Return values:

None

Definition at line 583 of file stm32h743i_eval_audio.c.

Referenced by HAL_SAI_TxHalfCpltCallback().

uint8_t BSP_AUDIO_OUT_Init	(	uint16_t	OutputDevice,
		uint8_t	Volume,
		uint32_t	AudioFreq
	)

Configures the audio Out peripheral.

Parameters:

OutputDevice,:	OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE, or OUTPUT_DEVICE_BOTH.
Volume,:	Initial volume level (from 0 (Mute) to 100 (Max))
AudioFreq,:	Audio frequency used to play the audio stream.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 289 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIO_OUT_SAIx, BSP_AUDIO_OUT_ClockConfig(), BSP_AUDIO_OUT_MspInit(), CODEC_AUDIOFRAME_SLOT_0123, haudio_out_sai, SAIx_Out_DeInit(), and SAIx_Out_Init().

void BSP_AUDIO_OUT_MspDeInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Deinitializes SAI MSP.

Parameters:

hsai,:	SAI handle
Params,:	pointer on additional configuration parameters, can be NULL.

Return values:

None

Definition at line 673 of file stm32h743i_eval_audio.c.

References AUDIO_OUT_SAIx, AUDIO_OUT_SAIx_CLK_DISABLE, AUDIO_OUT_SAIx_DMAx_IRQ, AUDIO_OUT_SAIx_FS_PIN, AUDIO_OUT_SAIx_MCLK_GPIO_PORT, AUDIO_OUT_SAIx_MCLK_PIN, AUDIO_OUT_SAIx_SCK_PIN, AUDIO_OUT_SAIx_SD_FS_SCK_GPIO_PORT, and AUDIO_OUT_SAIx_SD_PIN.

Referenced by BSP_AUDIO_OUT_DeInit().

void BSP_AUDIO_OUT_MspInit	(	SAI_HandleTypeDef *	hsai,
		void *	Params
	)

Initializes BSP_AUDIO_OUT MSP.

Parameters:

hsai,:	SAI handle
Params,:	pointer on additional configuration parameters, can be NULL.

Return values:

None

Definition at line 601 of file stm32h743i_eval_audio.c.

References AUDIO_IN_INTERFACE_PDM, AUDIO_OUT_IRQ_PREPRIO, AUDIO_OUT_SAIx, AUDIO_OUT_SAIx_AF, AUDIO_OUT_SAIx_CLK_ENABLE, AUDIO_OUT_SAIx_DMAx_CLK_ENABLE, AUDIO_OUT_SAIx_DMAx_IRQ, AUDIO_OUT_SAIx_DMAx_MEM_DATA_SIZE, AUDIO_OUT_SAIx_DMAx_PERIPH_DATA_SIZE, AUDIO_OUT_SAIx_DMAx_REQUEST, AUDIO_OUT_SAIx_DMAx_STREAM, AUDIO_OUT_SAIx_FS_PIN, AUDIO_OUT_SAIx_MCLK_ENABLE, AUDIO_OUT_SAIx_MCLK_GPIO_PORT, AUDIO_OUT_SAIx_MCLK_PIN, AUDIO_OUT_SAIx_SCK_PIN, AUDIO_OUT_SAIx_SD_FS_CLK_ENABLE, AUDIO_OUT_SAIx_SD_FS_SCK_GPIO_PORT, AUDIO_OUT_SAIx_SD_PIN, haudio_in_sai, and AUDIOIN_ContextTypeDef::Interface.

Referenced by BSP_AUDIO_IN_OUT_Init(), and BSP_AUDIO_OUT_Init().

uint8_t BSP_AUDIO_OUT_Pause ( void )

This function Pauses the audio file stream.

In case of using DMA, the DMA Pause feature is used.

Warning:: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 383 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Play	(	uint16_t *	pBuffer,
		uint32_t	Size
	)

Starts playing audio stream from a data buffer for a determined size.

Parameters:

pBuffer,:	Pointer to the buffer
Size,:	Number of audio data BYTES.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 348 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, AUDIODATA_SIZE, DMA_MAX, and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_Resume ( void )

Resumes the audio file stream.

Warning:: When calling BSP_AUDIO_OUT_Pause() function for pause, only BSP_AUDIO_OUT_Resume() function should be called for resume (use of BSP_AUDIO_OUT_Play() function for resume could lead to unexpected behaviour).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 407 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

void BSP_AUDIO_OUT_SetAudioFrameSlot ( uint32_t AudioFrameSlot )

Updates the Audio frame slot configuration.

Parameters:

AudioFrameSlot,: specifies the audio Frame slot This parameter can be any value of Code audio frame slot in TDM mode.

Note:: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frame slot.

Return values:

None

Definition at line 547 of file stm32h743i_eval_audio.c.

References haudio_out_sai.

void BSP_AUDIO_OUT_SetFrequency ( uint32_t AudioFreq )

Updates the audio frequency.

Parameters:

AudioFreq,: Audio frequency used to play the audio stream.

Note:: This API should be called after the BSP_AUDIO_OUT_Init() to adjust the audio frequency.

Return values:

None

Definition at line 523 of file stm32h743i_eval_audio.c.

References BSP_AUDIO_OUT_ClockConfig(), and haudio_out_sai.

uint8_t BSP_AUDIO_OUT_SetMute ( uint32_t Cmd )

Enables or disables the MUTE mode by software.

Parameters:

Cmd,: Could be AUDIO_MUTE_ON to mute sound or AUDIO_MUTE_OFF to unmute the codec and restore previous volume level.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 481 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetOutputMode ( uint8_t Output )

Switch dynamically (while audio file is played) the output target (speaker or headphone).

Parameters:

Output,: The audio output target: OUTPUT_DEVICE_SPEAKER, OUTPUT_DEVICE_HEADPHONE or OUTPUT_DEVICE_BOTH

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 502 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_SetVolume ( uint8_t Volume )

Controls the current audio volume level.

Parameters:

Volume,: Volume level to be set in percentage from 0% to 100% (0 for Mute and 100 for Max volume level).

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 461 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, and AUDIO_OK.

uint8_t BSP_AUDIO_OUT_Stop ( uint32_t Option )

Stops audio playing and Power down the Audio Codec.

Parameters:

Option,:

could be one of the following parameters

CODEC_PDWN_SW: for software power off (by writing registers). Then no need to reconfigure the Codec after power on.
CODEC_PDWN_HW: completely shut down the codec (physically). Then need to reconfigure the Codec after power on.

Return values:

AUDIO_OK if correct communication, else wrong communication

Definition at line 433 of file stm32h743i_eval_audio.c.

References audio_drv, AUDIO_ERROR, AUDIO_I2C_ADDRESS, AUDIO_OK, and haudio_out_sai.

void BSP_AUDIO_OUT_TransferComplete_CallBack ( void )

Manages the DMA full Transfer complete event.

Return values:

None

Definition at line 575 of file stm32h743i_eval_audio.c.

Referenced by HAL_SAI_TxCpltCallback().

STM32H743I_EVAL BSP User Manual: AUDIO OUT Exported Functions

STM32H743I_EVAL BSP

Functions

Function Documentation

Get in touch