STM32H743I_EVAL BSP User Manual: stm32h743i_eval_nor.h File Reference

STM32H743I_EVAL BSP

stm32h743i_eval_nor.h File Reference

This file contains the common defines and functions prototypes for the stm32h743i_eval_nor.c driver. More...

#include "stm32h7xx_hal.h"

Go to the source code of this file.

Defines

#define NOR_STATUS_OK   ((uint8_t)0x00)
 NOR status structure definition.
#define NOR_STATUS_ERROR   ((uint8_t)0x01)
#define NOR_DEVICE_ADDR   ((uint32_t)0x60000000)
#define NOR_MEMORY_WIDTH   FMC_NORSRAM_MEM_BUS_WIDTH_16
#define NOR_BURSTACCESS   FMC_BURST_ACCESS_MODE_DISABLE
#define NOR_WRITEBURST   FMC_WRITE_BURST_DISABLE
#define CONTINUOUSCLOCK_FEATURE   FMC_CONTINUOUS_CLOCK_SYNC_ONLY
#define BLOCKERASE_TIMEOUT   ((uint32_t)0x00A00000) /* NOR block erase timeout */
#define CHIPERASE_TIMEOUT   ((uint32_t)0x30000000) /* NOR chip erase timeout */
#define PROGRAM_TIMEOUT   ((uint32_t)0x00004400) /* NOR program timeout */
#define NOR_READY_BUSY_PIN   GPIO_PIN_6
#define NOR_READY_BUSY_GPIO   GPIOC
#define NOR_READY_STATE   GPIO_PIN_SET
#define NOR_BUSY_STATE   GPIO_PIN_RESET

Functions

uint8_t BSP_NOR_Init (void)
 Initializes the NOR device.
uint8_t BSP_NOR_DeInit (void)
 DeInitializes the NOR device.
uint8_t BSP_NOR_ReadData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Reads an amount of data from the NOR device.
uint8_t BSP_NOR_WriteData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Writes an amount of data to the NOR device.
uint8_t BSP_NOR_ProgramData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize)
 Programs an amount of data to the NOR device.
uint8_t BSP_NOR_Erase_Block (uint32_t BlockAddress)
 Erases the specified block of the NOR device.
uint8_t BSP_NOR_Erase_Chip (void)
 Erases the entire NOR chip.
uint8_t BSP_NOR_Read_ID (NOR_IDTypeDef *pNOR_ID)
 Reads NOR flash IDs.
void BSP_NOR_ReturnToReadMode (void)
 Returns the NOR memory to read mode.
__weak void BSP_NOR_MspInit (NOR_HandleTypeDef *norHandle, void *Params)
 Initializes the NOR MSP.
__weak void BSP_NOR_MspDeInit (NOR_HandleTypeDef *norHandle, void *Params)
 DeInitializes NOR MSP.

Detailed Description

This file contains the common defines and functions prototypes for the stm32h743i_eval_nor.c driver.

Author:
MCD Application Team
Version:
V1.0.0
Date:
21-April-2017
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32h743i_eval_nor.h.

Generated on Wed Aug 23 2017 17:45:14 for STM32H743I_EVAL BSP User Manual by   doxygen 1.7.6.1