STM32303C_EVAL BSP User Manual: stm32303c_eval_eeprom.h Source File

STM32303C EVAL BSP Drivers

stm32303c_eval_eeprom.h
Go to the documentation of this file.
00001 /**
00002   ******************************************************************************
00003   * @file    stm32303c_eval_eeprom.h
00004   * @author  MCD Application Team
00005   * @brief   This file contains all the functions prototypes for 
00006   *          the stm32303c_eval_eeprom.c firmware driver.
00007   ******************************************************************************
00008   * @attention
00009   *
00010   * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
00011   *
00012   * Redistribution and use in source and binary forms, with or without modification,
00013   * are permitted provided that the following conditions are met:
00014   *   1. Redistributions of source code must retain the above copyright notice,
00015   *      this list of conditions and the following disclaimer.
00016   *   2. Redistributions in binary form must reproduce the above copyright notice,
00017   *      this list of conditions and the following disclaimer in the documentation
00018   *      and/or other materials provided with the distribution.
00019   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00020   *      may be used to endorse or promote products derived from this software
00021   *      without specific prior written permission.
00022   *
00023   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00024   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00025   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00026   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00027   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00028   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00029   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00030   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00031   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00032   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00033   *
00034   ******************************************************************************
00035   */
00036 
00037 /* Define to prevent recursive inclusion -------------------------------------*/
00038 #ifndef __STM32303C_EVAL_EEPROM_H
00039 #define __STM32303C_EVAL_EEPROM_H
00040 
00041 #ifdef __cplusplus
00042  extern "C" {
00043 #endif
00044 
00045 /* Includes ------------------------------------------------------------------*/
00046 #include "stm32303c_eval.h"
00047 
00048 /** @addtogroup BSP
00049   * @{
00050   */
00051   
00052 /** @addtogroup STM32303C_EVAL
00053   * @{
00054   */ 
00055 
00056 /** @defgroup STM32303C_EVAL_EEPROM STM32303C-EVAL EEPROM
00057   * @{
00058   */
00059   
00060 /** @defgroup STM32303C_EVAL_EEPROM_Private_Variables Private Variables
00061   * @{
00062   */  
00063 /**
00064   * @}
00065   */ 
00066 
00067 /** @defgroup STM32303C_EVAL_EEPROM_Exported_Types Exported Types
00068   * @{
00069   */ 
00070 typedef struct
00071 {
00072   uint32_t  (*Init)(void);
00073   uint32_t  (*ReadBuffer)(uint8_t* , uint16_t , uint32_t* );
00074   uint32_t  (*WritePage)(uint8_t* , uint16_t , uint32_t* );
00075 }EEPROM_DrvTypeDef;
00076 /**
00077   * @}
00078   */
00079   
00080 /** @defgroup STM32303C_EVAL_EEPROM_Exported_Constants Exported Constants
00081   * @{
00082   */
00083 /* EEPROMs hardware address and page size */ 
00084 #define EEPROM_ADDRESS_M24M01           0xA4    /* EEPROM M24M01-HR used */
00085 #define EEPROM_ADDRESS_M24LR64_A01      0xA0    /* RF EEPROM ANT7-M24LR-A01 used */
00086 #define EEPROM_ADDRESS_M24LR64_A02      0xA6    /* RF EEPROM ANT7-M24LR-A02 used */
00087 
00088 #define EEPROM_PAGESIZE_M24M01          28      /* EEPROM M24M01-HR used */
00089 #define EEPROM_PAGESIZE_M24LR64         4       /* RF EEPROM ANT7-M24LR-A used */
00090 #define EEPROM_PAGESIZE_M95M01          256     /* EEPROM M95M01 used */
00091       
00092 /* EEPROM BSP return values */
00093 #define EEPROM_OK                       0
00094 #define EEPROM_FAIL                     1   
00095 #define EEPROM_TIMEOUT                  2   
00096  
00097 /* EEPROM BSP devices definition list supported */
00098 #define BSP_EEPROM_M24LR64              1       /* RF I2C EEPROM M24LR64 */
00099 #define BSP_EEPROM_M24M01               2       /* I2C EEPROM M24M01 */
00100 #define BSP_EEPROM_M95M01               3       /* SPI EEPROM M95M01 */
00101 
00102 /* Maximum number of trials for EEPROM_I2C_WaitEepromStandbyState() function */
00103 #define EEPROM_MAX_TRIALS               300
00104 /**
00105   * @}
00106   */ 
00107   
00108 /** @defgroup STM32303C_EVAL_EEPROM_Exported_Functions Exported Functions
00109   * @{
00110   */ 
00111 uint32_t  BSP_EEPROM_Init(void);
00112 void      BSP_EEPROM_SelectDevice(uint8_t DeviceID);
00113 uint32_t  BSP_EEPROM_ReadBuffer(uint8_t* pBuffer, uint16_t ReadAddr, uint32_t* NumByteToRead);
00114 uint32_t  BSP_EEPROM_WriteBuffer(uint8_t* pBuffer, uint16_t WriteAddr, uint32_t NumByteToWrite);
00115 
00116 /* USER Callbacks: This function is declared as __weak in EEPROM driver and 
00117    should be implemented into user application.  
00118    BSP_EEPROM_TIMEOUT_UserCallback() function is called whenever a timeout condition 
00119    occure during communication (waiting on an event that doesn't occur, bus 
00120    errors, busy devices ...). */
00121 void BSP_EEPROM_TIMEOUT_UserCallback(void);
00122 
00123 
00124 /* Link functions for I2C EEPROM peripheral */
00125 void                    EEPROM_I2C_IO_Init(void);
00126 HAL_StatusTypeDef       EEPROM_I2C_IO_WriteData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
00127 HAL_StatusTypeDef       EEPROM_I2C_IO_ReadData(uint16_t DevAddress, uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
00128 HAL_StatusTypeDef       EEPROM_I2C_IO_IsDeviceReady(uint16_t DevAddress, uint32_t Trials);
00129 
00130 /* Link functions for EEPROM peripheral over SPI */
00131 void                    EEPROM_SPI_IO_Init(void);
00132 void                    EEPROM_SPI_IO_WriteByte(uint8_t Data);
00133 uint8_t                 EEPROM_SPI_IO_ReadByte(void);
00134 HAL_StatusTypeDef       EEPROM_SPI_IO_WriteData(uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
00135 HAL_StatusTypeDef       EEPROM_SPI_IO_ReadData(uint16_t MemAddress, uint8_t* pBuffer, uint32_t BufferSize);
00136 HAL_StatusTypeDef       EEPROM_SPI_IO_WaitEepromStandbyState(void);
00137 void                    EEPROM_SPI_IO_WriteDummy(void);
00138 
00139 /**
00140   * @}
00141   */
00142 
00143 /**
00144   * @}
00145   */
00146 
00147 /**
00148   * @}
00149   */
00150 
00151 /**
00152   * @}
00153   */ 
00154 
00155 /**
00156   * @}
00157   */
00158 
00159 #ifdef __cplusplus
00160 }
00161 #endif
00162 
00163 #endif /* __H */
00164 
00165 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Generated on Wed May 31 2017 10:00:44 for STM32303C_EVAL BSP User Manual by   doxygen 1.7.6.1