STM32303C_EVAL BSP User Manual: stm32303c_eval_eeprom.h File Reference

STM32303C EVAL BSP Drivers

stm32303c_eval_eeprom.h File Reference

This file contains all the functions prototypes for the stm32303c_eval_eeprom.c firmware driver. More...

#include "stm32303c_eval.h"

Go to the source code of this file.

Data Structures

struct  EEPROM_DrvTypeDef

Defines

#define EEPROM_ADDRESS_M24M01   0xA4 /* EEPROM M24M01-HR used */
#define EEPROM_ADDRESS_M24LR64_A01   0xA0 /* RF EEPROM ANT7-M24LR-A01 used */
#define EEPROM_ADDRESS_M24LR64_A02   0xA6 /* RF EEPROM ANT7-M24LR-A02 used */
#define EEPROM_PAGESIZE_M24M01   28 /* EEPROM M24M01-HR used */
#define EEPROM_PAGESIZE_M24LR64   4 /* RF EEPROM ANT7-M24LR-A used */
#define EEPROM_PAGESIZE_M95M01   256 /* EEPROM M95M01 used */
#define EEPROM_OK   0
#define EEPROM_FAIL   1
#define EEPROM_TIMEOUT   2
#define BSP_EEPROM_M24LR64   1 /* RF I2C EEPROM M24LR64 */
#define BSP_EEPROM_M24M01   2 /* I2C EEPROM M24M01 */
#define BSP_EEPROM_M95M01   3 /* SPI EEPROM M95M01 */
#define EEPROM_MAX_TRIALS   300

Functions

uint32_t BSP_EEPROM_Init (void)
 Initializes peripherals used by the EEPROM device selected.
void BSP_EEPROM_SelectDevice (uint8_t DeviceID)
 Select the EEPROM device to communicate.
uint32_t BSP_EEPROM_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint32_t *NumByteToRead)
 Reads a block of data from the EEPROM device selected.
uint32_t BSP_EEPROM_WriteBuffer (uint8_t *pBuffer, uint16_t WriteAddr, uint32_t NumByteToWrite)
 Writes buffer of data to the EEPROM device selected.
__weak void BSP_EEPROM_TIMEOUT_UserCallback (void)
 Basic management of the timeout situation.
void EEPROM_I2C_IO_Init (void)
 Initializes peripherals used by the I2C EEPROM driver.
HAL_StatusTypeDef EEPROM_I2C_IO_WriteData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Write data to I2C EEPROM driver.
HAL_StatusTypeDef EEPROM_I2C_IO_ReadData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Read data from I2C EEPROM driver.
HAL_StatusTypeDef EEPROM_I2C_IO_IsDeviceReady (uint16_t DevAddress, uint32_t Trials)
 Checks if target device is ready for communication.
void EEPROM_SPI_IO_Init (void)
 Initializes the EEPROM SPI and put it into StandBy State (Ready for data transfer).
void EEPROM_SPI_IO_WriteByte (uint8_t Data)
 Write a byte on the EEPROM.
uint8_t EEPROM_SPI_IO_ReadByte (void)
 Read a byte from the EEPROM.
HAL_StatusTypeDef EEPROM_SPI_IO_WriteData (uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Write data to SPI EEPROM driver.
HAL_StatusTypeDef EEPROM_SPI_IO_ReadData (uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize)
 Read data from SPI EEPROM driver.
HAL_StatusTypeDef EEPROM_SPI_IO_WaitEepromStandbyState (void)
 Wait response from the SPI EEPROM.
void EEPROM_SPI_IO_WriteDummy (void)

Detailed Description

This file contains all the functions prototypes for the stm32303c_eval_eeprom.c firmware driver.

Author:
MCD Application Team
Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32303c_eval_eeprom.h.

Generated on Wed May 31 2017 10:00:44 for STM32303C_EVAL BSP User Manual by   doxygen 1.7.6.1