DC Current:Voltage Limit
Short Name: Voltage Limit
Specifies the voltage limit, in volts, for the output not to exceed when generating the desired current level on the specified channels.
This property is applicable only if the Output Function property is set to DC Current.
The channel must be enabled for the specified current level to take effect. Refer to the Output Enabled property for more information about enabling the output channel.
Valid Values: The valid values for this attribute are defined by the values to which the Voltage Limit Range attribute is set.
Remarks
The following table lists the characteristics of this property.
Data Type | ViReal64 |
Permissions | R/W |
Channel Based | Yes |
High-Level VI | niDCPower Configure Voltage Limit |