DC Voltage:Current Limit Autorange
Short Name: Current Limit Autorange
Specifies whether or not NI-DCPower automatically selects the current limit range based on the desired current limit for the specified channel(s).
If this property is set to On, NI-DCPower ignores any changes you make to the Current Limit Range property. If you change the Current Limit Autorange property from On to Off, NI-DCPower remembers the last value the Current Limit Range property was set to (or the default value if it was never set) and uses that value as the current limit range.
Read the Current Limit Range property to find out which range NI-DCPower automatically selects.
The Current Limit Autorange property is applicable only if the channel is configured to DC Voltage in the Output Function property.
Defined Values:
| On | NI-DCPower automatically selects the current limit range. |
| Off | NI-DCPower does not automatically select the current limit range. |
Default Value: Off
Remarks
The following table lists the characteristics of this property.
| Data Type | ViInt32 |
| Permissions | R/W |
| Channel Based | Yes |
| High-Level VI | None |