DC Voltage:Voltage Level Range
Short Name: Voltage Level Range
Specifies the voltage level range, in volts, for the specified channel(s). The range defines the valid values to which the voltage level can be set. Use the Voltage Level Autorange property to enable automatic selection of the voltage level range.
The Voltage Level Range property is applicable only if the Output Function property is set to DC Voltage.
The channel must be enabled for the specified voltage level range to take effect. Refer to the Output Enabled property for more information about enabling the output channel.
Valid Values:
NI PXI-4110
| Channel | Voltage Level Range (V) | Voltage Level (V) |
|---|---|---|
| 0 | 6 | 0 to +6 |
| 1 | 20 | 0 to +20 |
| 2 | 20 | 0 to -20 |
NI PXI-4130
| Channel | Voltage Level Range (V) | Voltage Level (V) |
|---|---|---|
| 0 | 6 | 0 to +6 |
| 1 | 6 | -6 to +6 |
| 20 | -20 to +20 |
 |
Note If a range other than what is listed in the preceding table is selected, it will be coerced to the next-highest level. For example, requesting the 10 V voltage level range on Channel 1 on the NI-PXI 4130 coerces the voltage level range to 20 V. Refer to the Ranges topic in the NI DC Power Supplies and SMUs Help for more information about coercion. |
Remarks
The following table lists the characteristics of this property.
| Data Type | ViReal64 |
| Permissions | R/W |
| Channel Based | Yes |
| High-Level VI | niDCPower Configure Voltage Level Range |