Infineon Security Platform Solution - Initialization Wizard |
Emergency Recovery
With this page you can configure the Emergency Recovery part of automatic Security Platform backups.
Availability of page:
|
Wizard Page Elements
Note that your options within this wizard page may be restricted depending on system policies.
The following table gives hints on how to use this wizard page.
Wizard Page Element | Explanation |
Create new recovery token | Select this option, if you want to create a new token to be used for Emergency Recovery. The token will be written to the location you have specified. You will have to set a new token password. |
Use existing recovery token | Select this option, if the following conditions are met:
You will have to verify the token password, i.e. you need to enter the password only once. |
File location Browse... |
If your policy settings permit a manual specification of the file location, you may change file name and path. Type in path and file name or browse for it. This file has XML format. If you selected Create new recovery token: The Emergency Recovery Token should be saved in a secure location such as a removable media stored in a secure environment. Do not store the recovery token on your hard drive. Otherwise in case of system or hard drive failure, your token will not be accessible and will result in data loss. Store the recovery token on a backup medium like a memory drive or a CD in order to prevent loss of this token and ensure that only you have access to this recovery token. |
Password | If you selected Create new recovery token, you need to set a new token password. Enter a password for the
Emergency Recovery Token. Consider general hints regarding passwords. If you selected Use existing recovery token, you need to verify the token password. Enter the existing token's password. |
Confirm Password | If you selected Create new recovery token, you need to confirm your new password. Enter the password again to confirm. |
©Infineon Technologies AG