|
Infineon Security Platform Solution - Backup Wizard |
Change Restore Settings/Add Personal Secure Drive
With this dialog you can set or change the restore settings for a Personal Secure Drive, or add another Personal Secure Drive to be restored. Depending on the action to be performed, only the required controls are enabled.
The following table gives hints on how to use this dialog:
| Wizard Page Element | Explanation | Change | Add |
 Image file backup path Browse... |
Specify the path of the image file backup to be restored. | Must be set, if no
appropriate image
file backup could be found at the default PSD backup
location. Else the path can be changed. |
Must be set |
Image file destination drive |
Select a drive where the PSD image file shall be restored. | Must be set, if it is not
possible to restore the image file backup to the destination
drive stored in the local settings. Else the destination drive cannot be changed. |
Must be set |
Drive letter |
To specify the drive letter for your Personal Secure Drive, select an
unused letter from the drop-down list of available letters (see
Personal Secure Drive Administration). |
Must be set, if it is not
possible to use the drive letter stored in the local settings. Else the drive letter cannot be changed. |
Must be set |
|
Drive label |
To specify the drive label, enter the label in the field provided. The label should be no more than 32 characters in length. For example, you might set the label to "My Secure Drive". | Cannot be changed | Must be set |
Load at logon |
Select this option if you want to load your PSD at logon. | Cannot be changed | Optional |
|
Create desktop shortcut |
Select this option if you want to access your PSD via a desktop shortcut. The shortcut name will contain drive letter and label. | Cannot be changed | Optional |
©Infineon Technologies AG