stm32l476g_discovery_qspi.h File Reference

This file contains the common defines and functions prototypes for the stm32l476g_discovery_qspi.c driver. More...

#include "stm32l4xx_hal.h" #include "../Components/n25q128a/n25q128a.h"

Go to the source code of this file.

Data Structures
struct	QSPI_Info
Defines
#define	QSPI_OK   ((uint8_t)0x00)
#define	QSPI_ERROR   ((uint8_t)0x01)
#define	QSPI_BUSY   ((uint8_t)0x02)
#define	QSPI_NOT_SUPPORTED   ((uint8_t)0x04)
#define	QSPI_SUSPENDED   ((uint8_t)0x08)
Functions
uint8_t	BSP_QSPI_Init (void)
	Initializes the QSPI interface.
uint8_t	BSP_QSPI_DeInit (void)
	De-Initializes the QSPI interface.
uint8_t	BSP_QSPI_Read (uint8_t *pData, uint32_t ReadAddr, uint32_t Size)
	Reads an amount of data from the QSPI memory.
uint8_t	BSP_QSPI_Write (uint8_t *pData, uint32_t WriteAddr, uint32_t Size)
	Writes an amount of data to the QSPI memory.
uint8_t	BSP_QSPI_Erase_Block (uint32_t BlockAddress)
	Erases the specified block of the QSPI memory.
uint8_t	BSP_QSPI_Erase_Sector (uint32_t Sector)
	Erases the specified sector of the QSPI memory.
uint8_t	BSP_QSPI_Erase_Chip (void)
	Erases the entire QSPI memory.
uint8_t	BSP_QSPI_GetStatus (void)
	Reads current status of the QSPI memory.
uint8_t	BSP_QSPI_GetInfo (QSPI_Info *pInfo)
	Return the configuration of the QSPI memory.
uint8_t	BSP_QSPI_EnableMemoryMappedMode (void)
	Configure the QSPI in memory-mapped mode.
uint8_t	BSP_QSPI_SuspendErase (void)
	This function suspends an ongoing erase command.
uint8_t	BSP_QSPI_ResumeErase (void)
	This function resumes a paused erase command.

---

Detailed Description

This file contains the common defines and functions prototypes for the stm32l476g_discovery_qspi.c driver.

Author:

MCD Application Team

Version:

$VERSION$

Date:

$DATE$

Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32l476g_discovery_qspi.h.