STM32F429I-Discovery BSP User Manual
|
This file contains all the functions prototypes for the stm32f429i_discovery_sdram.c driver. More...
#include "stm32f429i_discovery.h"
Go to the source code of this file.
Defines | |
#define | SDRAM_DEVICE_ADDR ((uint32_t)0xD0000000) |
FMC SDRAM Bank address. | |
#define | SDRAM_DEVICE_SIZE ((uint32_t)0x800000) /* SDRAM device size in MBytes */ |
#define | SDRAM_MEMORY_WIDTH FMC_SDRAM_MEM_BUS_WIDTH_16 |
FMC SDRAM Memory Width. | |
#define | SDRAM_CAS_LATENCY FMC_SDRAM_CAS_LATENCY_3 |
FMC SDRAM CAS Latency. | |
#define | SDCLOCK_PERIOD FMC_SDRAM_CLOCK_PERIOD_2 /* Default configuration used with LCD */ |
FMC SDRAM Memory clock period. | |
#define | SDRAM_READBURST FMC_SDRAM_RBURST_DISABLE /* Default configuration used with LCD */ |
FMC SDRAM Memory Read Burst feature. | |
#define | REFRESH_COUNT ((uint32_t)1386) /* SDRAM refresh counter */ |
FMC SDRAM Bank Remap. | |
#define | SDRAM_TIMEOUT ((uint32_t)0xFFFF) |
#define | __DMAx_CLK_ENABLE __DMA2_CLK_ENABLE |
#define | SDRAM_DMAx_CHANNEL DMA_CHANNEL_0 |
#define | SDRAM_DMAx_STREAM DMA2_Stream0 |
#define | SDRAM_DMAx_IRQn DMA2_Stream0_IRQn |
#define | SDRAM_DMAx_IRQHandler DMA2_Stream0_IRQHandler |
#define | SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000) |
FMC SDRAM Mode definition register defines. | |
#define | SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001) |
#define | SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002) |
#define | SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004) |
#define | SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000) |
#define | SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008) |
#define | SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020) |
#define | SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030) |
#define | SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000) |
#define | SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000) |
#define | SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200) |
Functions | |
void | BSP_SDRAM_Init (void) |
Initializes the SDRAM device. | |
void | BSP_SDRAM_Initialization_sequence (uint32_t RefreshCount) |
Programs the SDRAM device. | |
void | BSP_SDRAM_ReadData (uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) |
Reads an mount of data from the SDRAM memory in polling mode. | |
void | BSP_SDRAM_ReadData_DMA (uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) |
Reads an mount of data from the SDRAM memory in DMA mode. | |
void | BSP_SDRAM_WriteData (uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) |
Writes an mount of data to the SDRAM memory in polling mode. | |
void | BSP_SDRAM_WriteData_DMA (uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize) |
Writes an mount of data to the SDRAM memory in DMA mode. | |
HAL_StatusTypeDef | BSP_SDRAM_Sendcmd (FMC_SDRAM_CommandTypeDef *SdramCmd) |
Sends command to the SDRAM bank. | |
void | BSP_SDRAM_DMA_IRQHandler (void) |
Handles SDRAM DMA transfer interrupt request. |
Detailed Description
This file contains all the functions prototypes for the stm32f429i_discovery_sdram.c driver.
- Attention:
© COPYRIGHT(c) 2015 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f429i_discovery_sdram.h.
Generated on Wed Jan 13 2016 13:22:14 for STM32F429I-Discovery BSP User Manual by 1.7.6.1