stm32f429i_discovery.h File Reference

This file contains definitions for STM32F429I-Discovery Kit LEDs, push-buttons hardware resources. More...

#include "stm32f4xx_hal.h"

Go to the source code of this file.

Defines
#define	LEDn   2
#define	LED3_PIN   GPIO_PIN_13
#define	LED3_GPIO_PORT   GPIOG
#define	LED3_GPIO_CLK_ENABLE()   __GPIOG_CLK_ENABLE()
#define	LED3_GPIO_CLK_DISABLE()   __GPIOG_CLK_DISABLE()
#define	LED4_PIN   GPIO_PIN_14
#define	LED4_GPIO_PORT   GPIOG
#define	LED4_GPIO_CLK_ENABLE()   __GPIOG_CLK_ENABLE()
#define	LED4_GPIO_CLK_DISABLE()   __GPIOG_CLK_DISABLE()
#define	LEDx_GPIO_CLK_ENABLE(__INDEX__)
#define	LEDx_GPIO_CLK_DISABLE(__INDEX__)
#define	BUTTONn   1
#define	KEY_BUTTON_PIN   GPIO_PIN_0
	Wakeup push-button.
#define	KEY_BUTTON_GPIO_PORT   GPIOA
#define	KEY_BUTTON_GPIO_CLK_ENABLE()   __GPIOA_CLK_ENABLE()
#define	KEY_BUTTON_GPIO_CLK_DISABLE()   __GPIOA_CLK_DISABLE()
#define	KEY_BUTTON_EXTI_IRQn   EXTI0_IRQn
#define	BUTTONx_GPIO_CLK_ENABLE(__INDEX__)
#define	BUTTONx_GPIO_CLK_DISABLE(__INDEX__)
#define	IO_I2C_ADDRESS   0x82
#define	TS_I2C_ADDRESS   0x82
#define	DISCOVERY_I2Cx   I2C3
#define	DISCOVERY_I2Cx_CLOCK_ENABLE()   __I2C3_CLK_ENABLE()
#define	DISCOVERY_I2Cx_FORCE_RESET()   __I2C3_FORCE_RESET()
#define	DISCOVERY_I2Cx_RELEASE_RESET()   __I2C3_RELEASE_RESET()
#define	DISCOVERY_I2Cx_SDA_GPIO_CLK_ENABLE()   __GPIOC_CLK_ENABLE()
#define	DISCOVERY_I2Cx_SCL_GPIO_CLK_ENABLE()   __GPIOA_CLK_ENABLE()
#define	DISCOVERY_I2Cx_SDA_GPIO_CLK_DISABLE()   __GPIOC_CLK_DISABLE()
#define	DISCOVERY_I2Cx_SCL_PIN   GPIO_PIN_8
#define	DISCOVERY_I2Cx_SCL_GPIO_PORT   GPIOA
#define	DISCOVERY_I2Cx_SCL_SDA_AF   GPIO_AF4_I2C3
#define	DISCOVERY_I2Cx_SDA_PIN   GPIO_PIN_9
#define	DISCOVERY_I2Cx_SDA_GPIO_PORT   GPIOC
#define	DISCOVERY_I2Cx_EV_IRQn   I2C3_EV_IRQn
#define	DISCOVERY_I2Cx_ER_IRQn   I2C3_ER_IRQn
#define	I2Cx_TIMEOUT_MAX   0x3000 /*<! The value of the maximal timeout for I2C waiting loops */
#define	DISCOVERY_SPIx   SPI5
#define	DISCOVERY_SPIx_CLK_ENABLE()   __SPI5_CLK_ENABLE()
#define	DISCOVERY_SPIx_GPIO_PORT   GPIOF /* GPIOF */
#define	DISCOVERY_SPIx_AF   GPIO_AF5_SPI5
#define	DISCOVERY_SPIx_GPIO_CLK_ENABLE()   __GPIOF_CLK_ENABLE()
#define	DISCOVERY_SPIx_GPIO_CLK_DISABLE()   __GPIOF_CLK_DISABLE()
#define	DISCOVERY_SPIx_SCK_PIN   GPIO_PIN_7 /* PF.07 */
#define	DISCOVERY_SPIx_MISO_PIN   GPIO_PIN_8 /* PF.08 */
#define	DISCOVERY_SPIx_MOSI_PIN   GPIO_PIN_9 /* PF.09 */
#define	SPIx_TIMEOUT_MAX   ((uint32_t)0x1000)
#define	STMPE811_INT_PIN   GPIO_PIN_15
	IOE Control pin.
#define	STMPE811_INT_GPIO_PORT   GPIOA
#define	STMPE811_INT_CLK_ENABLE()   __GPIOA_CLK_ENABLE()
#define	STMPE811_INT_CLK_DISABLE()   __GPIOA_CLK_DISABLE()
#define	STMPE811_INT_EXTI   EXTI15_10_IRQn
#define	STMPE811_INT_EXTIHandler   EXTI15_10_IRQHandler
#define	LCD_CS_LOW()   HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET)
#define	LCD_CS_HIGH()   HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET)
#define	LCD_WRX_LOW()   HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_RESET)
#define	LCD_WRX_HIGH()   HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_SET)
#define	LCD_RDX_LOW()   HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_RESET)
#define	LCD_RDX_HIGH()   HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_SET)
#define	LCD_NCS_PIN   GPIO_PIN_2
	LCD Control pin.
#define	LCD_NCS_GPIO_PORT   GPIOC
#define	LCD_NCS_GPIO_CLK_ENABLE()   __GPIOC_CLK_ENABLE()
#define	LCD_NCS_GPIO_CLK_DISABLE()   __GPIOC_CLK_DISABLE()
#define	LCD_WRX_PIN   GPIO_PIN_13
	LCD Command/data pin.
#define	LCD_WRX_GPIO_PORT   GPIOD
#define	LCD_WRX_GPIO_CLK_ENABLE()   __GPIOD_CLK_ENABLE()
#define	LCD_WRX_GPIO_CLK_DISABLE()   __GPIOD_CLK_DISABLE()
#define	LCD_RDX_PIN   GPIO_PIN_12
#define	LCD_RDX_GPIO_PORT   GPIOD
#define	LCD_RDX_GPIO_CLK_ENABLE()   __GPIOD_CLK_ENABLE()
#define	LCD_RDX_GPIO_CLK_DISABLE()   __GPIOD_CLK_DISABLE()
#define	READWRITE_CMD   ((uint8_t)0x80)
#define	MULTIPLEBYTE_CMD   ((uint8_t)0x40)
#define	DUMMY_BYTE   ((uint8_t)0x00)
#define	GYRO_CS_LOW()   HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET)
#define	GYRO_CS_HIGH()   HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET)
#define	GYRO_CS_PIN   GPIO_PIN_1 /* PC.01 */
	GYROSCOPE SPI Interface pins.
#define	GYRO_CS_GPIO_PORT   GPIOC /* GPIOC */
#define	GYRO_CS_GPIO_CLK_ENABLE()   __GPIOC_CLK_ENABLE()
#define	GYRO_CS_GPIO_CLK_DISABLE()   __GPIOC_CLK_DISABLE()
#define	GYRO_INT_GPIO_CLK_ENABLE()   __GPIOA_CLK_ENABLE()
#define	GYRO_INT_GPIO_CLK_DISABLE()   __GPIOA_CLK_DISABLE()
#define	GYRO_INT_GPIO_PORT   GPIOA /* GPIOA */
#define	GYRO_INT1_PIN   GPIO_PIN_1 /* PA.01 */
#define	GYRO_INT1_EXTI_IRQn   EXTI1_IRQn
#define	GYRO_INT2_PIN   GPIO_PIN_2 /* PA.02 */
#define	GYRO_INT2_EXTI_IRQn   EXTI2_IRQn
Enumerations
enum	Led_TypeDef { LED3 = 0, LED4 = 1 }
enum	Button_TypeDef { BUTTON_KEY = 0 }
enum	ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 }
Functions
uint32_t	BSP_GetVersion (void)
	This method returns the STM32F429I DISCO BSP Driver revision.
void	BSP_LED_Init (Led_TypeDef Led)
	Configures LED GPIO.
void	BSP_LED_On (Led_TypeDef Led)
	Turns selected LED On.
void	BSP_LED_Off (Led_TypeDef Led)
	Turns selected LED Off.
void	BSP_LED_Toggle (Led_TypeDef Led)
	Toggles the selected LED.
void	BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
	Configures Button GPIO and EXTI Line.
uint32_t	BSP_PB_GetState (Button_TypeDef Button)
	Returns the selected Button state.

---

Detailed Description

This file contains definitions for STM32F429I-Discovery Kit LEDs, push-buttons hardware resources.

Author:

MCD Application Team

Version:

V2.1.3

Date:

13-January-2016

Attention:

© COPYRIGHT(c) 2015 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f429i_discovery.h.