|
STM32F429I-Discovery BSP User Manual
|
This file contains definitions for STM32F429I-Discovery Kit LEDs, push-buttons hardware resources. More...
#include "stm32f4xx_hal.h"
Go to the source code of this file.
Defines | |
| #define | LEDn 2 |
| #define | LED3_PIN GPIO_PIN_13 |
| #define | LED3_GPIO_PORT GPIOG |
| #define | LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE() |
| #define | LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE() |
| #define | LED4_PIN GPIO_PIN_14 |
| #define | LED4_GPIO_PORT GPIOG |
| #define | LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOG_CLK_ENABLE() |
| #define | LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOG_CLK_DISABLE() |
| #define | LEDx_GPIO_CLK_ENABLE(__INDEX__) |
| #define | LEDx_GPIO_CLK_DISABLE(__INDEX__) |
| #define | BUTTONn 1 |
| #define | KEY_BUTTON_PIN GPIO_PIN_0 |
| Wakeup push-button. | |
| #define | KEY_BUTTON_GPIO_PORT GPIOA |
| #define | KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | KEY_BUTTON_EXTI_IRQn EXTI0_IRQn |
| #define | BUTTONx_GPIO_CLK_ENABLE(__INDEX__) |
| #define | BUTTONx_GPIO_CLK_DISABLE(__INDEX__) |
| #define | IO_I2C_ADDRESS 0x82 |
| #define | TS_I2C_ADDRESS 0x82 |
| #define | DISCOVERY_I2Cx I2C3 |
| #define | DISCOVERY_I2Cx_CLOCK_ENABLE() __HAL_RCC_I2C3_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C3_FORCE_RESET() |
| #define | DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C3_RELEASE_RESET() |
| #define | DISCOVERY_I2Cx_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SCL_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SDA_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
| #define | DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_8 |
| #define | DISCOVERY_I2Cx_SCL_GPIO_PORT GPIOA |
| #define | DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C3 |
| #define | DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_9 |
| #define | DISCOVERY_I2Cx_SDA_GPIO_PORT GPIOC |
| #define | DISCOVERY_I2Cx_EV_IRQn I2C3_EV_IRQn |
| #define | DISCOVERY_I2Cx_ER_IRQn I2C3_ER_IRQn |
| #define | I2Cx_TIMEOUT_MAX 0x3000 /*<! The value of the maximal timeout for I2C waiting loops */ |
| #define | DISCOVERY_SPIx SPI5 |
| #define | DISCOVERY_SPIx_CLK_ENABLE() __HAL_RCC_SPI5_CLK_ENABLE() |
| #define | DISCOVERY_SPIx_GPIO_PORT GPIOF /* GPIOF */ |
| #define | DISCOVERY_SPIx_AF GPIO_AF5_SPI5 |
| #define | DISCOVERY_SPIx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() |
| #define | DISCOVERY_SPIx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE() |
| #define | DISCOVERY_SPIx_SCK_PIN GPIO_PIN_7 /* PF.07 */ |
| #define | DISCOVERY_SPIx_MISO_PIN GPIO_PIN_8 /* PF.08 */ |
| #define | DISCOVERY_SPIx_MOSI_PIN GPIO_PIN_9 /* PF.09 */ |
| #define | SPIx_TIMEOUT_MAX ((uint32_t)0x1000) |
| #define | STMPE811_INT_PIN GPIO_PIN_15 |
| IOE Control pin. | |
| #define | STMPE811_INT_GPIO_PORT GPIOA |
| #define | STMPE811_INT_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | STMPE811_INT_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | STMPE811_INT_EXTI EXTI15_10_IRQn |
| #define | STMPE811_INT_EXTIHandler EXTI15_10_IRQHandler |
| #define | LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET) |
| #define | LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET) |
| #define | LCD_WRX_LOW() HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_RESET) |
| #define | LCD_WRX_HIGH() HAL_GPIO_WritePin(LCD_WRX_GPIO_PORT, LCD_WRX_PIN, GPIO_PIN_SET) |
| #define | LCD_RDX_LOW() HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_RESET) |
| #define | LCD_RDX_HIGH() HAL_GPIO_WritePin(LCD_RDX_GPIO_PORT, LCD_RDX_PIN, GPIO_PIN_SET) |
| #define | LCD_NCS_PIN GPIO_PIN_2 |
| LCD Control pin. | |
| #define | LCD_NCS_GPIO_PORT GPIOC |
| #define | LCD_NCS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | LCD_NCS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
| #define | LCD_WRX_PIN GPIO_PIN_13 |
| LCD Command/data pin. | |
| #define | LCD_WRX_GPIO_PORT GPIOD |
| #define | LCD_WRX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LCD_WRX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LCD_RDX_PIN GPIO_PIN_12 |
| #define | LCD_RDX_GPIO_PORT GPIOD |
| #define | LCD_RDX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LCD_RDX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | READWRITE_CMD ((uint8_t)0x80) |
| #define | MULTIPLEBYTE_CMD ((uint8_t)0x40) |
| #define | DUMMY_BYTE ((uint8_t)0x00) |
| #define | GYRO_CS_LOW() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_RESET) |
| #define | GYRO_CS_HIGH() HAL_GPIO_WritePin(GYRO_CS_GPIO_PORT, GYRO_CS_PIN, GPIO_PIN_SET) |
| #define | GYRO_CS_PIN GPIO_PIN_1 /* PC.01 */ |
| GYROSCOPE SPI Interface pins. | |
| #define | GYRO_CS_GPIO_PORT GPIOC /* GPIOC */ |
| #define | GYRO_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | GYRO_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
| #define | GYRO_INT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | GYRO_INT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | GYRO_INT_GPIO_PORT GPIOA /* GPIOA */ |
| #define | GYRO_INT1_PIN GPIO_PIN_1 /* PA.01 */ |
| #define | GYRO_INT1_EXTI_IRQn EXTI1_IRQn |
| #define | GYRO_INT2_PIN GPIO_PIN_2 /* PA.02 */ |
| #define | GYRO_INT2_EXTI_IRQn EXTI2_IRQn |
Enumerations | |
| enum | Led_TypeDef { LED3 = 0, LED4 = 1 } |
| enum | Button_TypeDef { BUTTON_KEY = 0 } |
| enum | ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } |
Functions | |
| uint32_t | BSP_GetVersion (void) |
| This method returns the STM32F429I DISCO BSP Driver revision. | |
| void | BSP_LED_Init (Led_TypeDef Led) |
| Configures LED GPIO. | |
| void | BSP_LED_On (Led_TypeDef Led) |
| Turns selected LED On. | |
| void | BSP_LED_Off (Led_TypeDef Led) |
| Turns selected LED Off. | |
| void | BSP_LED_Toggle (Led_TypeDef Led) |
| Toggles the selected LED. | |
| void | BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode) |
| Configures Button GPIO and EXTI Line. | |
| uint32_t | BSP_PB_GetState (Button_TypeDef Button) |
| Returns the selected Button state. | |
Detailed Description
This file contains definitions for STM32F429I-Discovery Kit LEDs, push-buttons hardware resources.
- Attention:
© COPYRIGHT(c) 2017 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f429i_discovery.h.
Generated on Fri Feb 17 2017 12:10:38 for STM32F429I-Discovery BSP User Manual by
1.7.6.1