STM32F429I-Discovery BSP User Manual: stm32f429i_discovery.c File Reference

STM32F429I-Discovery BSP Driver

stm32f429i_discovery.c File Reference

This file provides set of firmware functions to manage Leds and push-button available on STM32F429I-Discovery Kit from STMicroelectronics. More...

Go to the source code of this file.

Defines

#define __STM32F429I_DISCO_BSP_VERSION_MAIN   (0x02)
 STM32F429I DISCO BSP Driver version number V2.1.5.
#define __STM32F429I_DISCO_BSP_VERSION_SUB1   (0x01)
#define __STM32F429I_DISCO_BSP_VERSION_SUB2   (0x05)
#define __STM32F429I_DISCO_BSP_VERSION_RC   (0x00)
#define __STM32F429I_DISCO_BSP_VERSION

Functions

static void I2Cx_Init (void)
 I2Cx Bus initialization.
static void I2Cx_ITConfig (void)
 Configures Interruption pin for I2C communication.
static void I2Cx_WriteData (uint8_t Addr, uint8_t Reg, uint8_t Value)
 Writes a value in a register of the device through BUS.
static void I2Cx_WriteBuffer (uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
 Writes a value in a register of the device through BUS.
static uint8_t I2Cx_ReadData (uint8_t Addr, uint8_t Reg)
 Reads a register of the device through BUS.
static uint8_t I2Cx_ReadBuffer (uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
 Reads multiple data on the BUS.
static void I2Cx_Error (void)
 I2Cx error treatment function.
static void I2Cx_MspInit (I2C_HandleTypeDef *hi2c)
 I2Cx MSP Initialization.
static void SPIx_Init (void)
 SPIx Bus initialization.
static void SPIx_Write (uint16_t Value)
 Writes a byte to device.
static uint32_t SPIx_Read (uint8_t ReadSize)
 Reads 4 bytes from device.
static uint8_t SPIx_WriteRead (uint8_t Byte)
 Sends a Byte through the SPI interface and return the Byte received from the SPI bus.
static void SPIx_Error (void)
 SPIx error treatment function.
static void SPIx_MspInit (SPI_HandleTypeDef *hspi)
 SPI MSP Init.
void LCD_IO_Init (void)
 Configures the LCD_SPI interface.
void LCD_IO_WriteData (uint16_t RegValue)
 Writes register value.
void LCD_IO_WriteReg (uint8_t Reg)
 Writes register address.
uint32_t LCD_IO_ReadData (uint16_t RegValue, uint8_t ReadSize)
 Reads register value.
void LCD_Delay (uint32_t Delay)
 Wait for loop in ms.
void IOE_Init (void)
 IOE Low Level Initialization.
void IOE_ITConfig (void)
 IOE Low Level Interrupt configuration.
void IOE_Delay (uint32_t Delay)
 IOE Delay.
void IOE_Write (uint8_t Addr, uint8_t Reg, uint8_t Value)
 IOE Writes single data operation.
uint8_t IOE_Read (uint8_t Addr, uint8_t Reg)
 IOE Reads single data.
uint16_t IOE_ReadMultiple (uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
 IOE Reads multiple data.
void IOE_WriteMultiple (uint8_t Addr, uint8_t Reg, uint8_t *pBuffer, uint16_t Length)
 IOE Writes multiple data.
void GYRO_IO_Init (void)
 Configures the Gyroscope SPI interface.
void GYRO_IO_Write (uint8_t *pBuffer, uint8_t WriteAddr, uint16_t NumByteToWrite)
 Writes one byte to the Gyroscope.
void GYRO_IO_Read (uint8_t *pBuffer, uint8_t ReadAddr, uint16_t NumByteToRead)
 Reads a block of data from the Gyroscope.
uint32_t BSP_GetVersion (void)
 This method returns the STM32F429I DISCO BSP Driver revision.
void BSP_LED_Init (Led_TypeDef Led)
 Configures LED GPIO.
void BSP_LED_On (Led_TypeDef Led)
 Turns selected LED On.
void BSP_LED_Off (Led_TypeDef Led)
 Turns selected LED Off.
void BSP_LED_Toggle (Led_TypeDef Led)
 Toggles the selected LED.
void BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode)
 Configures Button GPIO and EXTI Line.
uint32_t BSP_PB_GetState (Button_TypeDef Button)
 Returns the selected Button state.

Variables

GPIO_TypeDef * GPIO_PORT [LEDn]
const uint16_t GPIO_PIN [LEDn]
GPIO_TypeDef * BUTTON_PORT [BUTTONn] = {KEY_BUTTON_GPIO_PORT}
const uint16_t BUTTON_PIN [BUTTONn] = {KEY_BUTTON_PIN}
const uint8_t BUTTON_IRQn [BUTTONn] = {KEY_BUTTON_EXTI_IRQn}
uint32_t I2cxTimeout = I2Cx_TIMEOUT_MAX
uint32_t SpixTimeout = SPIx_TIMEOUT_MAX
I2C_HandleTypeDef I2cHandle
static SPI_HandleTypeDef SpiHandle
static uint8_t Is_LCD_IO_Initialized = 0

Detailed Description

This file provides set of firmware functions to manage Leds and push-button available on STM32F429I-Discovery Kit from STMicroelectronics.

Author:
MCD Application Team
Version:
V2.1.5
Date:
27-January-2017
Attention:

© COPYRIGHT(c) 2017 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm32f429i_discovery.c.

Generated on Fri Feb 17 2017 12:10:38 for STM32F429I-Discovery BSP User Manual by   doxygen 1.7.6.1