Defines
#define	ADC1_DR_ADDRESS 0x40012440
#define	TIM3_CCR1_ADDRESS 0x40000434
Functions
static void	ADC_Config (void)
	Configures the ADC1 channel11 in continuous mode.
static void	DMA_Config (void)
	Configures DMA1 channel3 to transfer data from ADC1_DR_ADDRESS to TIM3_CCR1_ADDRESS.
void	HardFault_Handler (void)
	This function handles Hard Fault exception.
int	main (void)
	Main program.
void	NMI_Handler (void)
	This function handles NMI exception.
void	PendSV_Handler (void)
	This function handles PendSVC exception.
void	SVC_Handler (void)
	This function handles SVCall exception.
void	SysTick_Handler (void)
	This function handles SysTick Handler.
static void	TIM_Config (void)
	Configures the TIM3 channel1 in PWM mode.

Define Documentation

#define ADC1_DR_ADDRESS 0x40012440

Definition at line 41 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/main.c.

Referenced by DMA_Config().

#define TIM3_CCR1_ADDRESS 0x40000434

Definition at line 42 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/main.c.

Referenced by DMA_Config().

Function Documentation

static void ADC_Config ( void ) [static]

Configures the ADC1 channel11 in continuous mode.

Parameters:

None

Return values:

None

Definition at line 117 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/main.c.

References GPIO_InitStructure.

Referenced by main().

static void DMA_Config ( void ) [static]

Configures DMA1 channel3 to transfer data from ADC1_DR_ADDRESS to TIM3_CCR1_ADDRESS.

Parameters:

None

Return values:

None

Definition at line 87 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/main.c.

References ADC1_DR_ADDRESS, DMA_InitStructure, and TIM3_CCR1_ADDRESS.

Referenced by main().

void HardFault_Handler ( void )

This function handles Hard Fault exception.

Parameters:

None

Return values:

None

Definition at line 66 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/stm32f0xx_it.c.

int main ( void )

Main program.

Parameters:

None

Return values:

None

< At this stage the microcontroller clock setting is already configured, this is done through SystemInit() function which is called from startup file (startup_stm32f0xx.s) before to branch to application main. To reconfigure the default setting of SystemInit() function, refer to system_stm32f0xx.c file

Definition at line 58 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/main.c.

References ADC_Config(), DMA_Config(), and TIM_Config().

void NMI_Handler ( void )

This function handles NMI exception.

Parameters:

None

Return values:

None

Definition at line 57 of file STM32F0xx_StdPeriph_Examples/DMA/DMA_ADCTIMTransfer/stm32f0xx_it.c.

void PendSV_Handler ( void )

This function handles PendSVC exception.

Parameters: