STM32F0xx Standard Peripherals Firmware Library
|
Header for main.c module. More...
#include "stm32f0xx.h"
#include "stm32072b_eval.h"
#include "stm32072b_eval_lcd.h"
Go to the source code of this file.
Defines | |
#define | CAN_AF_PORT GPIO_AF_0 |
#define | CAN_CLK RCC_APB1Periph_CAN |
#define | CAN_GPIO_CLK RCC_AHBPeriph_GPIOD |
#define | CAN_GPIO_PORT GPIOD |
#define | CAN_RX_PIN GPIO_Pin_0 |
#define | CAN_RX_SOURCE GPIO_PinSource0 |
#define | CAN_TX_PIN GPIO_Pin_1 |
#define | CAN_TX_SOURCE GPIO_PinSource1 |
#define | CANx CAN |
Functions | |
void | LED_Display (uint8_t Ledstatus) |
Turn ON/OFF the dedicated led. |
Detailed Description
Header for main.c module.
- Author:
- MCD Application Team
- Version:
- V1.4.0
- Date:
- 24-July-2014
- Attention:
© COPYRIGHT 2014 STMicroelectronics
Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); You may not use this file except in compliance with the License. You may obtain a copy of the License at:
http://www.st.com/software_license_agreement_liberty_v2
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Definition in file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Define Documentation
#define CAN_AF_PORT GPIO_AF_0 |
Definition at line 45 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_CLK RCC_APB1Periph_CAN |
Definition at line 40 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_GPIO_CLK RCC_AHBPeriph_GPIOD |
Definition at line 44 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_GPIO_PORT GPIOD |
Definition at line 43 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_RX_PIN GPIO_Pin_0 |
Definition at line 41 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_RX_SOURCE GPIO_PinSource0 |
Definition at line 46 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_TX_PIN GPIO_Pin_1 |
Definition at line 42 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CAN_TX_SOURCE GPIO_PinSource1 |
Definition at line 47 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config().
#define CANx CAN |
Definition at line 39 of file STM32F0xx_StdPeriph_Examples/CAN/CAN_DualFIFO/main.h.
Referenced by CAN_Config(), CEC_CAN_IRQHandler(), Display_ReceivedMsg(), Display_TransmittedMsg(), EXTI0_1_IRQHandler(), EXTI4_15_IRQHandler(), and main().