STM32F0xx_StdPeriph_Examples/RTC/RTC_Tamper/stm32f0xx_it.c

Go to the documentation of this file.

/**
  ******************************************************************************
  * @file    RTC/RTC_Tamper/stm32f0xx_it.c 
  * @author  MCD Application Team
  * @version V1.4.0
  * @date    24-July-2014
  * @brief   Main Interrupt Service Routines.
  *          This file provides template for all exceptions handler and 
  *          peripherals interrupt service routine.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_it.h"

/** @addtogroup STM32F0xx_StdPeriph_Examples
  * @{
  */

/** @addtogroup RTC_Tamper
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/

/******************************************************************************/
/*            Cortex-M0 Processor Exceptions Handlers                         */
/******************************************************************************/

/**
  * @brief  This function handles NMI exception.
  * @param  None
  * @retval None
  */
void NMI_Handler(void)
{
}

/**
  * @brief  This function handles Hard Fault exception.
  * @param  None
  * @retval None
  */
void HardFault_Handler(void)
{
  /* Go to infinite loop when Hard Fault exception occurs */
  while (1)
  {
  }
}

/**
  * @brief  This function handles SVCall exception.
  * @param  None
  * @retval None
  */
void SVC_Handler(void)
{
}

/**
  * @brief  This function handles PendSVC exception.
  * @param  None
  * @retval None
  */
void PendSV_Handler(void)
{
}

/**
  * @brief  This function handles SysTick Handler.
  * @param  None
  * @retval None
  */
void SysTick_Handler(void)
{
}

/******************************************************************************/
/*                 STM32F0xx Peripherals Interrupt Handlers                   */
/******************************************************************************/
/**
  * @brief  This function handles RTC interrupt request. 
  * @param  None
  * @retval None
  */
void RTC_IRQHandler(void)
{
  if(RTC_GetFlagStatus(RTC_FLAG_TAMP1F) != RESET)
  { 
    /* Tamper 1 detection event occurred */
    /* Check if RTC Backup Data registers are cleared */
    if(IsBackupRegReset() == 0)
    {
      /* OK, RTC Backup Data registers are reset as expected */
      /* Turn on LED2 */
      STM_EVAL_LEDToggle(LED2);            
    }
    else
    {
      /* RTC Backup Data registers are not reset */
      /* Turn on LED4 */
      STM_EVAL_LEDToggle(LED4);
    }
    
    /* Clear Tamper 1 pin Event(TAMP1F) pending flag */
    RTC_ClearFlag(RTC_FLAG_TAMP1F);

    /* Disable Tamper pin 1 */
    RTC_TamperCmd(RTC_Tamper_1, DISABLE);
    
    /* Enable Tamper pin */
    RTC_TamperCmd(RTC_Tamper_1, ENABLE); 
  }
}
/******************************************************************************/
/*                 STM32F0xx Peripherals Interrupt Handlers                   */
/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
/*  available peripheral interrupt handler's name please refer to the startup */
/*  file (startup_stm32f0xx.s).                                               */
/******************************************************************************/

/**
  * @brief  This function handles PPP interrupt request.
  * @param  None
  * @retval None
  */
/*void PPP_IRQHandler(void)
{
}*/

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/