STM3210C EVAL COM

Defines
#define	COMn   1
#define	EVAL_COM1   USART2
	Definition for COM port1, connected to USART2.
#define	EVAL_COM1_CLK_ENABLE()   __HAL_RCC_USART2_CLK_ENABLE()
#define	EVAL_COM1_CLK_DISABLE()   __HAL_RCC_USART2_CLK_DISABLE()
#define	AFIOCOM1_CLK_ENABLE()   __HAL_RCC_AFIO_CLK_ENABLE()
#define	AFIOCOM1_CLK_DISABLE()   __HAL_RCC_AFIO_CLK_DISABLE()
#define	EVAL_COM1_TX_PIN   GPIO_PIN_5 /* PD.05*/
#define	EVAL_COM1_TX_GPIO_PORT   GPIOD
#define	EVAL_COM1_TX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_TX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_RX_PIN   GPIO_PIN_6 /* PD.06*/
#define	EVAL_COM1_RX_GPIO_PORT   GPIOD
#define	EVAL_COM1_RX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOD_CLK_ENABLE()
#define	EVAL_COM1_RX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOD_CLK_DISABLE()
#define	EVAL_COM1_IRQn   USART2_IRQn
#define	COMx_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0)
#define	COMx_CLK_DISABLE(__INDEX__)   (((__INDEX__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0)
#define	AFIOCOMx_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) AFIOCOM1_CLK_ENABLE();} while(0)
#define	AFIOCOMx_CLK_DISABLE(__INDEX__)   (((__INDEX__) == COM1) ? AFIOCOM1_CLK_DISABLE() : 0)
#define	AFIOCOMx_REMAP(__INDEX__)   (((__INDEX__) == COM1) ? (AFIO->MAPR |= (AFIO_MAPR_USART2_REMAP)) : 0)
#define	COMx_TX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0)
#define	COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0)
#define	COMx_RX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0)
#define	COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   (((__INDEX__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0)

---

Define Documentation

#define AFIOCOM1_CLK_DISABLE

(

)

__HAL_RCC_AFIO_CLK_DISABLE()

Definition at line 266 of file stm3210c_eval.h.

#define AFIOCOM1_CLK_ENABLE

(

)

__HAL_RCC_AFIO_CLK_ENABLE()

Definition at line 265 of file stm3210c_eval.h.

#define AFIOCOMx_CLK_DISABLE

(

__INDEX__

)

(((__INDEX__) == COM1) ? AFIOCOM1_CLK_DISABLE() : 0)

Definition at line 284 of file stm3210c_eval.h.

#define AFIOCOMx_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) AFIOCOM1_CLK_ENABLE();} while(0)

Definition at line 283 of file stm3210c_eval.h.

Referenced by BSP_COM_Init().

#define AFIOCOMx_REMAP

(

__INDEX__

)

(((__INDEX__) == COM1) ? (AFIO->MAPR |= (AFIO_MAPR_USART2_REMAP)) : 0)

Definition at line 286 of file stm3210c_eval.h.

Referenced by BSP_COM_Init().

#define COMn   1

Definition at line 256 of file stm3210c_eval.h.

#define COMx_CLK_DISABLE

(

__INDEX__

)

(((__INDEX__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0)

Definition at line 281 of file stm3210c_eval.h.

#define COMx_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0)

Definition at line 280 of file stm3210c_eval.h.

Referenced by BSP_COM_Init().

#define COMx_RX_GPIO_CLK_DISABLE

(

__INDEX__

)

(((__INDEX__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0)

Definition at line 292 of file stm3210c_eval.h.

#define COMx_RX_GPIO_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0)

Definition at line 291 of file stm3210c_eval.h.

Referenced by BSP_COM_Init().

#define COMx_TX_GPIO_CLK_DISABLE

(

__INDEX__

)

(((__INDEX__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0)

Definition at line 289 of file stm3210c_eval.h.

#define COMx_TX_GPIO_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0)

Definition at line 288 of file stm3210c_eval.h.

Referenced by BSP_COM_Init().

#define EVAL_COM1   USART2

Definition for COM port1, connected to USART2.

Definition at line 261 of file stm3210c_eval.h.

#define EVAL_COM1_CLK_DISABLE

(

)

__HAL_RCC_USART2_CLK_DISABLE()

Definition at line 263 of file stm3210c_eval.h.

#define EVAL_COM1_CLK_ENABLE

(

)

__HAL_RCC_USART2_CLK_ENABLE()

Definition at line 262 of file stm3210c_eval.h.

#define EVAL_COM1_IRQn   USART2_IRQn

Definition at line 278 of file stm3210c_eval.h.

#define EVAL_COM1_RX_GPIO_CLK_DISABLE

(

)

__HAL_RCC_GPIOD_CLK_DISABLE()

Definition at line 276 of file stm3210c_eval.h.

#define EVAL_COM1_RX_GPIO_CLK_ENABLE

(

)

__HAL_RCC_GPIOD_CLK_ENABLE()

Definition at line 275 of file stm3210c_eval.h.

#define EVAL_COM1_RX_GPIO_PORT   GPIOD

Definition at line 274 of file stm3210c_eval.h.

#define EVAL_COM1_RX_PIN   GPIO_PIN_6 /* PD.06*/

Definition at line 273 of file stm3210c_eval.h.

#define EVAL_COM1_TX_GPIO_CLK_DISABLE

(

)

__HAL_RCC_GPIOD_CLK_DISABLE()

Definition at line 271 of file stm3210c_eval.h.

#define EVAL_COM1_TX_GPIO_CLK_ENABLE

(

)

__HAL_RCC_GPIOD_CLK_ENABLE()

Definition at line 270 of file stm3210c_eval.h.

#define EVAL_COM1_TX_GPIO_PORT   GPIOD

Definition at line 269 of file stm3210c_eval.h.

#define EVAL_COM1_TX_PIN   GPIO_PIN_5 /* PD.05*/

Definition at line 268 of file stm3210c_eval.h.