stm3210c_eval_io.h File Reference

This file contains the common defines and functions prototypes for the stm3210c_eval_io.c driver. More...

#include "stm3210c_eval.h" #include "../Components/stmpe811/stmpe811.h"

Go to the source code of this file.

Defines
#define	IO1_PIN_OFFSET   0
#define	IO2_PIN_OFFSET   8
#define	IO1_PIN_0   (uint32_t)(0x00000001 << IO1_PIN_OFFSET)
#define	IO1_PIN_1   (uint32_t)(0x00000002 << IO1_PIN_OFFSET)
#define	IO1_PIN_2   (uint32_t)(0x00000004 << IO1_PIN_OFFSET)
#define	IO1_PIN_3   (uint32_t)(0x00000008 << IO1_PIN_OFFSET)
#define	IO1_PIN_4   (uint32_t)(0x00000010 << IO1_PIN_OFFSET)
#define	IO1_PIN_5   (uint32_t)(0x00000020 << IO1_PIN_OFFSET)
#define	IO1_PIN_6   (uint32_t)(0x00000040 << IO1_PIN_OFFSET)
#define	IO1_PIN_7   (uint32_t)(0x00000080 << IO1_PIN_OFFSET)
#define	IO1_PIN_ALL   (uint32_t)(0x000000FF << IO1_PIN_OFFSET)
#define	IO2_PIN_0   (uint32_t)(0x00000001 << IO2_PIN_OFFSET)
#define	IO2_PIN_1   (uint32_t)(0x00000002 << IO2_PIN_OFFSET)
#define	IO2_PIN_2   (uint32_t)(0x00000004 << IO2_PIN_OFFSET)
#define	IO2_PIN_3   (uint32_t)(0x00000008 << IO2_PIN_OFFSET)
#define	IO2_PIN_4   (uint32_t)(0x00000010 << IO2_PIN_OFFSET)
#define	IO2_PIN_5   (uint32_t)(0x00000020 << IO2_PIN_OFFSET)
#define	IO2_PIN_6   (uint32_t)(0x00000040 << IO2_PIN_OFFSET)
#define	IO2_PIN_7   (uint32_t)(0x00000080 << IO2_PIN_OFFSET)
#define	IO2_PIN_ALL   (uint32_t)(0x000000FF << IO2_PIN_OFFSET)
Enumerations
enum	IO_StatusTypeDef { IO_OK = 0x00, IO_ERROR = 0x01, IO_TIMEOUT = 0x02 }
Functions
uint8_t	BSP_IO_Init (void)
	Initializes and configures the IO functionalities and configures all necessary hardware resources (GPIOs, clocks..).
void	BSP_IO_ITClear (uint32_t IO_Pin)
	Clears the selected IO IT pending bit.
uint32_t	BSP_IO_ITGetStatus (uint32_t IO_Pin)
	Gets the selected pins IT status.
uint8_t	BSP_IO_ConfigPin (uint32_t IO_Pin, IO_ModeTypedef IO_Mode)
	Configures the IO pin(s) according to IO mode structure value.
void	BSP_IO_WritePin (uint32_t IO_Pin, uint8_t PinState)
	Sets the selected pins state.
uint32_t	BSP_IO_ReadPin (uint32_t IO_Pin)
	Gets the selected pins current state.
void	BSP_IO_TogglePin (uint32_t IO_Pin)
	Toggles the selected pins state.

---

Detailed Description

This file contains the common defines and functions prototypes for the stm3210c_eval_io.c driver.

Author:

MCD Application Team

Version:

V7.0.0

Date:

14-April-2017

Attention:

© COPYRIGHT(c) 2016 STMicroelectronics

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Definition in file stm3210c_eval_io.h.