STM32091C_EVAL BSP User Manual
|
Defines | |
#define | COMn 1 |
#define | EVAL_COM1 USART1 |
Definition for COM port1, connected to USART1. | |
#define | EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE() |
#define | EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE() |
#define | EVAL_COM1_TX_PIN GPIO_PIN_9 /* PA.09 */ |
#define | EVAL_COM1_TX_GPIO_PORT GPIOA |
#define | EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | EVAL_COM1_TX_AF GPIO_AF1_USART1 |
#define | EVAL_COM1_RX_PIN GPIO_PIN_10 /* PA.10 */ |
#define | EVAL_COM1_RX_GPIO_PORT GPIOA |
#define | EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | EVAL_COM1_RX_AF GPIO_AF1_USART1 |
#define | EVAL_COM1_CTS_PIN GPIO_PIN_11 /* PA.11 */ |
#define | EVAL_COM1_CTS_GPIO_PORT GPIOA |
#define | EVAL_COM1_CTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | EVAL_COM1_CTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | EVAL_COM1_CTS_AF GPIO_AF1_USART1 |
#define | EVAL_COM1_RTS_PIN GPIO_PIN_12 /* PA.12 */ |
#define | EVAL_COM1_RTS_GPIO_PORT GPIOA |
#define | EVAL_COM1_RTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | EVAL_COM1_RTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | EVAL_COM1_RTS_AF GPIO_AF1_USART1 |
#define | EVAL_COM1_IRQn USART1_IRQn |
#define | COMx_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0) |
#define | COMx_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0) |
#define | COMx_TX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0) |
#define | COMx_TX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) |
#define | COMx_RX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0) |
#define | COMx_RX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) |
#define | COMx_CTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CTS_GPIO_CLK_ENABLE();} while(0) |
#define | COMx_CTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CTS_GPIO_CLK_DISABLE() : 0) |
#define | COMx_RTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RTS_GPIO_CLK_ENABLE();} while(0) |
#define | COMx_RTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RTS_GPIO_CLK_DISABLE() : 0) |
#define | EVAL_I2C1 I2C1 |
#define | EVAL_I2C1_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() |
#define | EVAL_I2C1_CLK_DISABLE() __HAL_RCC_I2C1_CLK_DISABLE() |
#define | EVAL_I2C1_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() |
#define | EVAL_I2C1_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() |
#define | EVAL_I2C1_SCL_PIN GPIO_PIN_6 /* PB.6 */ |
#define | EVAL_I2C1_SDA_PIN GPIO_PIN_7 /* PB.7 */ |
#define | EVAL_I2C1_GPIO_PORT GPIOB /* GPIOB */ |
#define | EVAL_I2C1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | EVAL_I2C1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | EVAL_I2C1_SCL_SDA_AF GPIO_AF1_I2C1 |
#define | EVAL_I2C2 I2C2 |
#define | EVAL_I2C2_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE() |
#define | EVAL_I2C2_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE() |
#define | EVAL_I2C2_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET() |
#define | EVAL_I2C2_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET() |
#define | EVAL_I2C2_SCL_PIN GPIO_PIN_13 /* PB.13 */ |
#define | EVAL_I2C2_SDA_PIN GPIO_PIN_14 /* PB.14 */ |
#define | EVAL_I2C2_GPIO_PORT GPIOB /* GPIOB */ |
#define | EVAL_I2C2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | EVAL_I2C2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | EVAL_I2C2_AF GPIO_AF5_I2C2 |
#define | EVAL_I2C2_IRQn I2C2_IRQn |
#define | EVAL_I2C1_TIMEOUT_MAX 1000 |
#define | EVAL_I2C2_TIMEOUT_MAX 1000 |
#define | I2C2_TIMING 0x00E0D3FF |
#define | I2C1_TIMING 0x00E0D3FF |
#define | EVAL_SPIx SPI1 |
Definition for SPI Interface pins (SPI1 used) | |
#define | EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() |
#define | EVAL_SPIx_CLK_DISABLE() __HAL_RCC_SPI1_CLK_DISABLE() |
#define | EVAL_SPIx_FORCE_RESET() __HAL_RCC_SPI1_FORCE_RESET() |
#define | EVAL_SPIx_RELEASE_RESET() __HAL_RCC_SPI1_RELEASE_RESET() |
#define | EVAL_SPIx_SCK_PIN GPIO_PIN_13 /* PE.13 */ |
#define | EVAL_SPIx_SCK_GPIO_PORT GPIOE /* GPIOE */ |
#define | EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
#define | EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
#define | EVAL_SPIx_SCK_AF GPIO_AF1_SPI1 |
#define | EVAL_SPIx_MISO_PIN GPIO_PIN_14 /* PE.14 */ |
#define | EVAL_SPIx_MISO_GPIO_PORT GPIOE /* GPIOE */ |
#define | EVAL_SPIx_MISO_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
#define | EVAL_SPIx_MISO_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
#define | EVAL_SPIx_MISO_AF GPIO_AF1_SPI1 |
#define | EVAL_SPIx_MOSI_PIN GPIO_PIN_15 /* PE.15 */ |
#define | EVAL_SPIx_MOSI_GPIO_PORT GPIOE /* GPIOE */ |
#define | EVAL_SPIx_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
#define | EVAL_SPIx_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
#define | EVAL_SPIx_MOSI_AF GPIO_AF1_SPI1 |
#define | EVAL_SPIx_MOSI_DIR_PIN GPIO_PIN_9 /* PE.09 */ |
#define | EVAL_SPIx_MOSI_DIR_GPIO_PORT GPIOE /* GPIOE */ |
#define | EVAL_SPIx_MOSI_DIR_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
#define | EVAL_SPIx_MOSI_DIR_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
#define | EVAL_SPIx_TIMEOUT_MAX 1000 |
Define Documentation
#define COMn 1 |
Definition at line 272 of file stm32091c_eval.h.
#define COMx_CLK_DISABLE | ( | __COM__ | ) | (((__COM__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0) |
Definition at line 308 of file stm32091c_eval.h.
#define COMx_CLK_ENABLE | ( | __COM__ | ) | do { if((__COM__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0) |
Definition at line 307 of file stm32091c_eval.h.
Referenced by BSP_COM_Init().
#define COMx_CTS_GPIO_CLK_DISABLE | ( | __COM__ | ) | (((__COM__) == COM1) ? EVAL_COM1_CTS_GPIO_CLK_DISABLE() : 0) |
Definition at line 317 of file stm32091c_eval.h.
#define COMx_CTS_GPIO_CLK_ENABLE | ( | __COM__ | ) | do { if((__COM__) == COM1) EVAL_COM1_CTS_GPIO_CLK_ENABLE();} while(0) |
Definition at line 316 of file stm32091c_eval.h.
#define COMx_RTS_GPIO_CLK_DISABLE | ( | __COM__ | ) | (((__COM__) == COM1) ? EVAL_COM1_RTS_GPIO_CLK_DISABLE() : 0) |
Definition at line 320 of file stm32091c_eval.h.
#define COMx_RTS_GPIO_CLK_ENABLE | ( | __COM__ | ) | do { if((__COM__) == COM1) EVAL_COM1_RTS_GPIO_CLK_ENABLE();} while(0) |
Definition at line 319 of file stm32091c_eval.h.
#define COMx_RX_GPIO_CLK_DISABLE | ( | __COM__ | ) | (((__COM__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) |
Definition at line 314 of file stm32091c_eval.h.
#define COMx_RX_GPIO_CLK_ENABLE | ( | __COM__ | ) | do { if((__COM__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0) |
Definition at line 313 of file stm32091c_eval.h.
Referenced by BSP_COM_Init().
#define COMx_TX_GPIO_CLK_DISABLE | ( | __COM__ | ) | (((__COM__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) |
Definition at line 311 of file stm32091c_eval.h.
#define COMx_TX_GPIO_CLK_ENABLE | ( | __COM__ | ) | do { if((__COM__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0) |
Definition at line 310 of file stm32091c_eval.h.
Referenced by BSP_COM_Init().
#define EVAL_COM1 USART1 |
Definition for COM port1, connected to USART1.
Definition at line 277 of file stm32091c_eval.h.
#define EVAL_COM1_CLK_DISABLE | ( | ) | __HAL_RCC_USART1_CLK_DISABLE() |
Definition at line 279 of file stm32091c_eval.h.
#define EVAL_COM1_CLK_ENABLE | ( | ) | __HAL_RCC_USART1_CLK_ENABLE() |
Definition at line 278 of file stm32091c_eval.h.
#define EVAL_COM1_CTS_AF GPIO_AF1_USART1 |
Definition at line 297 of file stm32091c_eval.h.
#define EVAL_COM1_CTS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 296 of file stm32091c_eval.h.
#define EVAL_COM1_CTS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 295 of file stm32091c_eval.h.
#define EVAL_COM1_CTS_GPIO_PORT GPIOA |
Definition at line 294 of file stm32091c_eval.h.
#define EVAL_COM1_CTS_PIN GPIO_PIN_11 /* PA.11 */ |
Definition at line 293 of file stm32091c_eval.h.
#define EVAL_COM1_IRQn USART1_IRQn |
Definition at line 305 of file stm32091c_eval.h.
#define EVAL_COM1_RTS_AF GPIO_AF1_USART1 |
Definition at line 303 of file stm32091c_eval.h.
#define EVAL_COM1_RTS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 302 of file stm32091c_eval.h.
#define EVAL_COM1_RTS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 301 of file stm32091c_eval.h.
#define EVAL_COM1_RTS_GPIO_PORT GPIOA |
Definition at line 300 of file stm32091c_eval.h.
#define EVAL_COM1_RTS_PIN GPIO_PIN_12 /* PA.12 */ |
Definition at line 299 of file stm32091c_eval.h.
#define EVAL_COM1_RX_AF GPIO_AF1_USART1 |
Definition at line 291 of file stm32091c_eval.h.
#define EVAL_COM1_RX_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 290 of file stm32091c_eval.h.
#define EVAL_COM1_RX_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 289 of file stm32091c_eval.h.
#define EVAL_COM1_RX_GPIO_PORT GPIOA |
Definition at line 288 of file stm32091c_eval.h.
#define EVAL_COM1_RX_PIN GPIO_PIN_10 /* PA.10 */ |
Definition at line 287 of file stm32091c_eval.h.
#define EVAL_COM1_TX_AF GPIO_AF1_USART1 |
Definition at line 285 of file stm32091c_eval.h.
#define EVAL_COM1_TX_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 284 of file stm32091c_eval.h.
#define EVAL_COM1_TX_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 283 of file stm32091c_eval.h.
#define EVAL_COM1_TX_GPIO_PORT GPIOA |
Definition at line 282 of file stm32091c_eval.h.
#define EVAL_COM1_TX_PIN GPIO_PIN_9 /* PA.09 */ |
Definition at line 281 of file stm32091c_eval.h.
#define EVAL_I2C1 I2C1 |
Definition at line 326 of file stm32091c_eval.h.
Referenced by I2C1_Init().
#define EVAL_I2C1_CLK_DISABLE | ( | ) | __HAL_RCC_I2C1_CLK_DISABLE() |
Definition at line 328 of file stm32091c_eval.h.
#define EVAL_I2C1_CLK_ENABLE | ( | ) | __HAL_RCC_I2C1_CLK_ENABLE() |
Definition at line 327 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_FORCE_RESET | ( | ) | __HAL_RCC_I2C1_FORCE_RESET() |
Definition at line 329 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 337 of file stm32091c_eval.h.
#define EVAL_I2C1_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 336 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_GPIO_PORT GPIOB /* GPIOB */ |
Definition at line 335 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_RELEASE_RESET | ( | ) | __HAL_RCC_I2C1_RELEASE_RESET() |
Definition at line 330 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_SCL_PIN GPIO_PIN_6 /* PB.6 */ |
Definition at line 332 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_SCL_SDA_AF GPIO_AF1_I2C1 |
Definition at line 338 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_SDA_PIN GPIO_PIN_7 /* PB.7 */ |
Definition at line 333 of file stm32091c_eval.h.
Referenced by I2C1_MspInit().
#define EVAL_I2C1_TIMEOUT_MAX 1000 |
Definition at line 363 of file stm32091c_eval.h.
#define EVAL_I2C2 I2C2 |
Definition at line 341 of file stm32091c_eval.h.
Referenced by I2C2_Init().
#define EVAL_I2C2_AF GPIO_AF5_I2C2 |
Definition at line 353 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_CLK_DISABLE | ( | ) | __HAL_RCC_I2C2_CLK_DISABLE() |
Definition at line 343 of file stm32091c_eval.h.
#define EVAL_I2C2_CLK_ENABLE | ( | ) | __HAL_RCC_I2C2_CLK_ENABLE() |
Definition at line 342 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_FORCE_RESET | ( | ) | __HAL_RCC_I2C2_FORCE_RESET() |
Definition at line 344 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 352 of file stm32091c_eval.h.
#define EVAL_I2C2_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 351 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_GPIO_PORT GPIOB /* GPIOB */ |
Definition at line 350 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_IRQn I2C2_IRQn |
Definition at line 356 of file stm32091c_eval.h.
#define EVAL_I2C2_RELEASE_RESET | ( | ) | __HAL_RCC_I2C2_RELEASE_RESET() |
Definition at line 345 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_SCL_PIN GPIO_PIN_13 /* PB.13 */ |
Definition at line 347 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_SDA_PIN GPIO_PIN_14 /* PB.14 */ |
Definition at line 348 of file stm32091c_eval.h.
Referenced by I2C2_MspInit().
#define EVAL_I2C2_TIMEOUT_MAX 1000 |
Definition at line 364 of file stm32091c_eval.h.
#define EVAL_SPIx SPI1 |
Definition for SPI Interface pins (SPI1 used)
Definition at line 377 of file stm32091c_eval.h.
Referenced by SPIx_Init().
#define EVAL_SPIx_CLK_DISABLE | ( | ) | __HAL_RCC_SPI1_CLK_DISABLE() |
Definition at line 379 of file stm32091c_eval.h.
#define EVAL_SPIx_CLK_ENABLE | ( | ) | __HAL_RCC_SPI1_CLK_ENABLE() |
Definition at line 378 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_FORCE_RESET | ( | ) | __HAL_RCC_SPI1_FORCE_RESET() |
Definition at line 380 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MISO_AF GPIO_AF1_SPI1 |
Definition at line 393 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MISO_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOE_CLK_DISABLE() |
Definition at line 392 of file stm32091c_eval.h.
#define EVAL_SPIx_MISO_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOE_CLK_ENABLE() |
Definition at line 391 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MISO_GPIO_PORT GPIOE /* GPIOE */ |
Definition at line 390 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MISO_PIN GPIO_PIN_14 /* PE.14 */ |
Definition at line 389 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_AF GPIO_AF1_SPI1 |
Definition at line 399 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_DIR_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOE_CLK_DISABLE() |
Definition at line 404 of file stm32091c_eval.h.
#define EVAL_SPIx_MOSI_DIR_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOE_CLK_ENABLE() |
Definition at line 403 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_DIR_GPIO_PORT GPIOE /* GPIOE */ |
Definition at line 402 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_DIR_PIN GPIO_PIN_9 /* PE.09 */ |
Definition at line 401 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOE_CLK_DISABLE() |
Definition at line 398 of file stm32091c_eval.h.
#define EVAL_SPIx_MOSI_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOE_CLK_ENABLE() |
Definition at line 397 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_GPIO_PORT GPIOE /* GPIOE */ |
Definition at line 396 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_MOSI_PIN GPIO_PIN_15 /* PE.15 */ |
Definition at line 395 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_RELEASE_RESET | ( | ) | __HAL_RCC_SPI1_RELEASE_RESET() |
Definition at line 381 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_SCK_AF GPIO_AF1_SPI1 |
Definition at line 387 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_SCK_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOE_CLK_DISABLE() |
Definition at line 386 of file stm32091c_eval.h.
#define EVAL_SPIx_SCK_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOE_CLK_ENABLE() |
Definition at line 385 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_SCK_GPIO_PORT GPIOE /* GPIOE */ |
Definition at line 384 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_SCK_PIN GPIO_PIN_13 /* PE.13 */ |
Definition at line 383 of file stm32091c_eval.h.
Referenced by SPIx_MspInit().
#define EVAL_SPIx_TIMEOUT_MAX 1000 |
Definition at line 411 of file stm32091c_eval.h.
#define I2C1_TIMING 0x00E0D3FF |
Definition at line 369 of file stm32091c_eval.h.
Referenced by I2C1_Init().
#define I2C2_TIMING 0x00E0D3FF |
Definition at line 368 of file stm32091c_eval.h.
Referenced by I2C2_Init().
Generated on Wed Jul 5 2017 09:21:50 for STM32091C_EVAL BSP User Manual by 1.7.6.1