|
STM32091C_EVAL BSP User Manual
|
Defines | |
| #define | SD_DUMMY_BYTE 0xFF |
| #define | SD_MAX_FRAME_LENGTH 17 /* Lenght = 16 + 1 */ |
| #define | SD_CMD_LENGTH 6 |
| #define | SD_MAX_TRY 100 /* Number of try */ |
| #define | SD_CSD_STRUCT_V1 0x2 /* CSD struct version V1 */ |
| #define | SD_CSD_STRUCT_V2 0x1 /* CSD struct version V2 */ |
| #define | SD_TOKEN_START_DATA_SINGLE_BLOCK_READ 0xFE /* Data token start byte, Start Single Block Read */ |
| Start Data tokens: Tokens (necessary because at nop/idle (and CS active) only 0xff is on the data/command line) | |
| #define | SD_TOKEN_START_DATA_MULTIPLE_BLOCK_READ 0xFE /* Data token start byte, Start Multiple Block Read */ |
| #define | SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE 0xFE /* Data token start byte, Start Single Block Write */ |
| #define | SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data token start byte, Start Multiple Block Write */ |
| #define | SD_TOKEN_STOP_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data toke stop byte, Stop Multiple Block Write */ |
| #define | SD_CMD_GO_IDLE_STATE 0 /* CMD0 = 0x40 */ |
| Commands: CMDxx = CMD-number | 0x40. | |
| #define | SD_CMD_SEND_OP_COND 1 /* CMD1 = 0x41 */ |
| #define | SD_CMD_SEND_IF_COND 8 /* CMD8 = 0x48 */ |
| #define | SD_CMD_SEND_CSD 9 /* CMD9 = 0x49 */ |
| #define | SD_CMD_SEND_CID 10 /* CMD10 = 0x4A */ |
| #define | SD_CMD_STOP_TRANSMISSION 12 /* CMD12 = 0x4C */ |
| #define | SD_CMD_SEND_STATUS 13 /* CMD13 = 0x4D */ |
| #define | SD_CMD_SET_BLOCKLEN 16 /* CMD16 = 0x50 */ |
| #define | SD_CMD_READ_SINGLE_BLOCK 17 /* CMD17 = 0x51 */ |
| #define | SD_CMD_READ_MULT_BLOCK 18 /* CMD18 = 0x52 */ |
| #define | SD_CMD_SET_BLOCK_COUNT 23 /* CMD23 = 0x57 */ |
| #define | SD_CMD_WRITE_SINGLE_BLOCK 24 /* CMD24 = 0x58 */ |
| #define | SD_CMD_WRITE_MULT_BLOCK 25 /* CMD25 = 0x59 */ |
| #define | SD_CMD_PROG_CSD 27 /* CMD27 = 0x5B */ |
| #define | SD_CMD_SET_WRITE_PROT 28 /* CMD28 = 0x5C */ |
| #define | SD_CMD_CLR_WRITE_PROT 29 /* CMD29 = 0x5D */ |
| #define | SD_CMD_SEND_WRITE_PROT 30 /* CMD30 = 0x5E */ |
| #define | SD_CMD_SD_ERASE_GRP_START 32 /* CMD32 = 0x60 */ |
| #define | SD_CMD_SD_ERASE_GRP_END 33 /* CMD33 = 0x61 */ |
| #define | SD_CMD_UNTAG_SECTOR 34 /* CMD34 = 0x62 */ |
| #define | SD_CMD_ERASE_GRP_START 35 /* CMD35 = 0x63 */ |
| #define | SD_CMD_ERASE_GRP_END 36 /* CMD36 = 0x64 */ |
| #define | SD_CMD_UNTAG_ERASE_GROUP 37 /* CMD37 = 0x65 */ |
| #define | SD_CMD_ERASE 38 /* CMD38 = 0x66 */ |
| #define | SD_CMD_SD_APP_OP_COND 41 /* CMD41 = 0x69 */ |
| #define | SD_CMD_APP_CMD 55 /* CMD55 = 0x77 */ |
| #define | SD_CMD_READ_OCR 58 /* CMD55 = 0x79 */ |
Enumerations | |
| enum | SD_Answer_type { SD_ANSWER_R1_EXPECTED, SD_ANSWER_R1B_EXPECTED, SD_ANSWER_R2_EXPECTED, SD_ANSWER_R3_EXPECTED, SD_ANSWER_R4R5_EXPECTED, SD_ANSWER_R7_EXPECTED } |
| SD ansewer format. More... | |
| enum | SD_Error { SD_R1_NO_ERROR = (0x00), SD_R1_IN_IDLE_STATE = (0x01), SD_R1_ERASE_RESET = (0x02), SD_R1_ILLEGAL_COMMAND = (0x04), SD_R1_COM_CRC_ERROR = (0x08), SD_R1_ERASE_SEQUENCE_ERROR = (0x10), SD_R1_ADDRESS_ERROR = (0x20), SD_R1_PARAMETER_ERROR = (0x40), SD_R2_NO_ERROR = 0x00, SD_R2_CARD_LOCKED = 0x01, SD_R2_LOCKUNLOCK_ERROR = 0x02, SD_R2_ERROR = 0x04, SD_R2_CC_ERROR = 0x08, SD_R2_CARD_ECC_FAILED = 0x10, SD_R2_WP_VIOLATION = 0x20, SD_R2_ERASE_PARAM = 0x40, SD_R2_OUTOFRANGE = 0x80, SD_DATA_OK = (0x05), SD_DATA_CRC_ERROR = (0x0B), SD_DATA_WRITE_ERROR = (0x0D), SD_DATA_OTHER_ERROR = (0xFF) } |
| SD reponses and error flags. More... | |
Define Documentation
| #define SD_CMD_APP_CMD 55 /* CMD55 = 0x77 */ |
Definition at line 189 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_CMD_CLR_WRITE_PROT 29 /* CMD29 = 0x5D */ |
Definition at line 179 of file stm32091c_eval_sd.c.
| #define SD_CMD_ERASE 38 /* CMD38 = 0x66 */ |
Definition at line 187 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_Erase().
| #define SD_CMD_ERASE_GRP_END 36 /* CMD36 = 0x64 */ |
Definition at line 185 of file stm32091c_eval_sd.c.
| #define SD_CMD_ERASE_GRP_START 35 /* CMD35 = 0x63 */ |
Definition at line 184 of file stm32091c_eval_sd.c.
| #define SD_CMD_GO_IDLE_STATE 0 /* CMD0 = 0x40 */ |
Commands: CMDxx = CMD-number | 0x40.
Definition at line 164 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_CMD_LENGTH 6 |
Definition at line 130 of file stm32091c_eval_sd.c.
Referenced by SD_SendCmd().
| #define SD_CMD_PROG_CSD 27 /* CMD27 = 0x5B */ |
Definition at line 177 of file stm32091c_eval_sd.c.
| #define SD_CMD_READ_MULT_BLOCK 18 /* CMD18 = 0x52 */ |
Definition at line 173 of file stm32091c_eval_sd.c.
| #define SD_CMD_READ_OCR 58 /* CMD55 = 0x79 */ |
Definition at line 190 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_CMD_READ_SINGLE_BLOCK 17 /* CMD17 = 0x51 */ |
Definition at line 172 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_ReadBlocks().
| #define SD_CMD_SD_APP_OP_COND 41 /* CMD41 = 0x69 */ |
Definition at line 188 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_CMD_SD_ERASE_GRP_END 33 /* CMD33 = 0x61 */ |
Definition at line 182 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_Erase().
| #define SD_CMD_SD_ERASE_GRP_START 32 /* CMD32 = 0x60 */ |
Definition at line 181 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_Erase().
| #define SD_CMD_SEND_CID 10 /* CMD10 = 0x4A */ |
Definition at line 168 of file stm32091c_eval_sd.c.
Referenced by SD_GetCIDRegister().
| #define SD_CMD_SEND_CSD 9 /* CMD9 = 0x49 */ |
Definition at line 167 of file stm32091c_eval_sd.c.
Referenced by SD_GetCSDRegister().
| #define SD_CMD_SEND_IF_COND 8 /* CMD8 = 0x48 */ |
Definition at line 166 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_CMD_SEND_OP_COND 1 /* CMD1 = 0x41 */ |
Definition at line 165 of file stm32091c_eval_sd.c.
| #define SD_CMD_SEND_STATUS 13 /* CMD13 = 0x4D */ |
Definition at line 170 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_GetStatus().
| #define SD_CMD_SEND_WRITE_PROT 30 /* CMD30 = 0x5E */ |
Definition at line 180 of file stm32091c_eval_sd.c.
| #define SD_CMD_SET_BLOCK_COUNT 23 /* CMD23 = 0x57 */ |
Definition at line 174 of file stm32091c_eval_sd.c.
| #define SD_CMD_SET_BLOCKLEN 16 /* CMD16 = 0x50 */ |
Definition at line 171 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_ReadBlocks(), and BSP_SD_WriteBlocks().
| #define SD_CMD_SET_WRITE_PROT 28 /* CMD28 = 0x5C */ |
Definition at line 178 of file stm32091c_eval_sd.c.
| #define SD_CMD_STOP_TRANSMISSION 12 /* CMD12 = 0x4C */ |
Definition at line 169 of file stm32091c_eval_sd.c.
| #define SD_CMD_UNTAG_ERASE_GROUP 37 /* CMD37 = 0x65 */ |
Definition at line 186 of file stm32091c_eval_sd.c.
| #define SD_CMD_UNTAG_SECTOR 34 /* CMD34 = 0x62 */ |
Definition at line 183 of file stm32091c_eval_sd.c.
| #define SD_CMD_WRITE_MULT_BLOCK 25 /* CMD25 = 0x59 */ |
Definition at line 176 of file stm32091c_eval_sd.c.
| #define SD_CMD_WRITE_SINGLE_BLOCK 24 /* CMD24 = 0x58 */ |
Definition at line 175 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_WriteBlocks().
| #define SD_CSD_STRUCT_V1 0x2 /* CSD struct version V1 */ |
Definition at line 134 of file stm32091c_eval_sd.c.
| #define SD_CSD_STRUCT_V2 0x1 /* CSD struct version V2 */ |
Definition at line 135 of file stm32091c_eval_sd.c.
| #define SD_DUMMY_BYTE 0xFF |
Definition at line 127 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_Erase(), BSP_SD_GetStatus(), BSP_SD_ReadBlocks(), BSP_SD_WriteBlocks(), SD_GetCIDRegister(), SD_GetCSDRegister(), SD_GetDataResponse(), SD_GoIdleState(), SD_ReadData(), SD_SendCmd(), and SD_WaitData().
| #define SD_MAX_FRAME_LENGTH 17 /* Lenght = 16 + 1 */ |
Definition at line 129 of file stm32091c_eval_sd.c.
| #define SD_MAX_TRY 100 /* Number of try */ |
Definition at line 132 of file stm32091c_eval_sd.c.
Referenced by SD_GoIdleState().
| #define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_READ 0xFE /* Data token start byte, Start Multiple Block Read */ |
Definition at line 156 of file stm32091c_eval_sd.c.
| #define SD_TOKEN_START_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data token start byte, Start Multiple Block Write */ |
Definition at line 158 of file stm32091c_eval_sd.c.
| #define SD_TOKEN_START_DATA_SINGLE_BLOCK_READ 0xFE /* Data token start byte, Start Single Block Read */ |
Start Data tokens: Tokens (necessary because at nop/idle (and CS active) only 0xff is on the data/command line)
Definition at line 155 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_ReadBlocks(), SD_GetCIDRegister(), and SD_GetCSDRegister().
| #define SD_TOKEN_START_DATA_SINGLE_BLOCK_WRITE 0xFE /* Data token start byte, Start Single Block Write */ |
Definition at line 157 of file stm32091c_eval_sd.c.
Referenced by BSP_SD_WriteBlocks().
| #define SD_TOKEN_STOP_DATA_MULTIPLE_BLOCK_WRITE 0xFD /* Data toke stop byte, Stop Multiple Block Write */ |
Definition at line 159 of file stm32091c_eval_sd.c.
Enumeration Type Documentation
| enum SD_Answer_type |
SD ansewer format.
Definition at line 141 of file stm32091c_eval_sd.c.
| enum SD_Error |
SD reponses and error flags.
Definition at line 195 of file stm32091c_eval_sd.c.
Generated on Wed Jul 5 2017 09:21:50 for STM32091C_EVAL BSP User Manual by
1.7.6.1