|
UINT32 | Signature |
| Offset 0x0520.
|
|
UINT8 | SkipExtGfxScan |
| Offset 0x0524 - Skip external display device scanning Enable: Do not scan for external display device, Disable (Default): Scan external display devices $EN_DIS.
|
|
UINT8 | BdatEnable |
| Offset 0x0525 - Generate BIOS Data ACPI Table Enable: Generate BDAT for MRC RMT or SA PCIe data. More...
|
|
UINT8 | ScanExtGfxForLegacyOpRom |
| Offset 0x0526 - Detect External Graphics device for LegacyOpROM Detect and report if external graphics device only support LegacyOpROM or not (to support CSM auto-enable). More...
|
|
UINT8 | LockPTMregs |
| Offset 0x0527 - Lock PCU Thermal Management registers Lock PCU Thermal Management registers. More...
|
|
UINT8 | DmiVc1 |
| Offset 0x0528 - Enable/Disable DmiVc1 Enable/Disable DmiVc1. More...
|
|
UINT8 | DmiVcm |
| Offset 0x0529 - Enable/Disable DmiVcm Enable/Disable DmiVcm. More...
|
|
UINT8 | DmiMaxLinkSpeed |
| Offset 0x052A - DMI Max Link Speed Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3.
|
|
UINT8 | DmiGen3EqPh2Enable |
| Offset 0x052B - DMI Equalization Phase 2 DMI Equalization Phase 2. More...
|
|
UINT8 | DmiGen3EqPh3Method |
| Offset 0x052C - DMI Gen3 Equalization Phase3 DMI Gen3 Equalization Phase3. More...
|
|
UINT8 | Peg0Gen3EqPh2Enable |
| Offset 0x052D - Phase2 EQ enable on the PEG 0:1:0. More...
|
|
UINT8 | Peg1Gen3EqPh2Enable |
| Offset 0x052E - Phase2 EQ enable on the PEG 0:1:1. More...
|
|
UINT8 | Peg2Gen3EqPh2Enable |
| Offset 0x052F - Phase2 EQ enable on the PEG 0:1:2. More...
|
|
UINT8 | Peg0Gen3EqPh3Method |
| Offset 0x0530 - Phase3 EQ method on the PEG 0:1:0. More...
|
|
UINT8 | Peg1Gen3EqPh3Method |
| Offset 0x0531 - Phase3 EQ method on the PEG 0:1:1. More...
|
|
UINT8 | Peg2Gen3EqPh3Method |
| Offset 0x0532 - Phase3 EQ method on the PEG 0:1:2. More...
|
|
UINT8 | PegGen3ProgramStaticEq |
| Offset 0x0533 - Enable/Disable PEG GEN3 Static EQ Phase1 programming Program PEG Gen3 EQ Phase1 Static Presets. More...
|
|
UINT8 | Gen3SwEqAlwaysAttempt |
| Offset 0x0534 - PEG Gen3 SwEq Always Attempt Gen3 Software Equalization will be executed every boot. More...
|
|
UINT8 | Gen3SwEqNumberOfPresets |
| Offset 0x0535 - Select number of TxEq presets to test in the PCIe/DMI SwEq Select number of TxEq presets to test in the PCIe/DMI SwEq. More...
|
|
UINT8 | Gen3SwEqEnableVocTest |
| Offset 0x0536 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization Algorithm. More...
|
|
UINT8 | PegRxCemTestingMode |
| Offset 0x0537 - PPCIe Rx Compliance Testing Mode Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; it should only be set when doing PCIe compliance testing $EN_DIS.
|
|
UINT8 | PegRxCemLoopbackLane |
| Offset 0x0538 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled the specificied Lane (0 - 15) will be used for RxCEMLoopback. More...
|
|
UINT8 | PegGenerateBdatMarginTable |
| Offset 0x0539 - Generate PCIe BDAT Margin Table Set this policy to enable the generation and addition of PCIe margin data to the BDAT table. More...
|
|
UINT8 | UnusedUpdSpace9 [6] |
| Offset 0x053A.
|
|
UINT8 | PegRxCemNonProtocolAwareness |
| Offset 0x0540 - PCIe Non-Protocol Awareness for Rx Compliance Testing Set this policy to enable the generation and addition of PCIe margin data to the BDAT table. More...
|
|
UINT8 | PegGen3RxCtleOverride |
| Offset 0x0541 - PCIe Override RxCTLE Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE peak values unmodified $EN_DIS.
|
|
UINT8 | PegGen3Rsvd |
| Offset 0x0542 - Rsvd Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE peak values unmodified $EN_DIS.
|
|
UINT8 | PanelPowerEnable |
| Offset 0x0543 - Panel Power Enable Control for enabling/disabling VDD force bit (Required only for early enabling of eDP panel). More...
|
|
UINT8 | PegGen3RootPortPreset [16] |
| Offset 0x0544 - PEG Gen3 Root port preset values per lane Used for programming PEG Gen3 preset values per lane. More...
|
|
UINT8 | PegGen3EndPointPreset [16] |
| Offset 0x0554 - PEG Gen3 End port preset values per lane Used for programming PEG Gen3 preset values per lane. More...
|
|
UINT8 | PegGen3EndPointHint [16] |
| Offset 0x0564 - PEG Gen3 End port Hint values per lane Used for programming PEG Gen3 Hint values per lane. More...
|
|
UINT16 | Gen3SwEqJitterDwellTime |
| Offset 0x0574 - Jitter Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 1000. More...
|
|
UINT16 | Gen3SwEqJitterErrorTarget |
| Offset 0x0576 - Jitter Error Target for PCIe Gen3 Software Equalization Range: 0-65535, default is 1. More...
|
|
UINT16 | Gen3SwEqVocDwellTime |
| Offset 0x0578 - VOC Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 10000. More...
|
|
UINT16 | Gen3SwEqVocErrorTarget |
| Offset 0x057A - VOC Error Target for PCIe Gen3 Software Equalization Range: 0-65535, default is 2. More...
|
|
UINT8 | SaPreMemTestRsvd [4] |
| Offset 0x057C - SaPreMemTestRsvd Reserved for SA Pre-Mem Test $EN_DIS.
|
|
UINT64 | BiosAcmBase |
| Offset 0x0580 - BiosAcmBase Enable/Disable. More...
|
|
UINT32 | BiosAcmSize |
| Offset 0x0588 - BiosAcmSize Enable/Disable. More...
|
|
UINT32 | TgaSize |
| Offset 0x058C - TgaSize Enable/Disable. More...
|
|
UINT64 | TxtLcpPdBase |
| Offset 0x0590 - TxtLcpPdBase Enable/Disable. More...
|
|
UINT64 | TxtLcpPdSize |
| Offset 0x0598 - TxtLcpPdSize Enable/Disable. More...
|
|
UINT16 | TotalFlashSize |
| Offset 0x05A0 - TotalFlashSize Enable/Disable. More...
|
|
UINT16 | BiosSize |
| Offset 0x05A2 - BiosSize Enable/Disable. More...
|
|
UINT8 | PchDciEn |
| Offset 0x05A4 - PCH Dci Enable Enable/disable PCH Dci. More...
|
|
UINT8 | PchDciAutoDetect |
| Offset 0x05A5 - PCH Dci Auto Detect Deprecated $EN_DIS.
|
|
UINT8 | SmbusDynamicPowerGating |
| Offset 0x05A6 - Smbus dynamic power gating Disable or Enable Smbus dynamic power gating. More...
|
|
UINT8 | WdtDisableAndLock |
| Offset 0x05A7 - Disable and Lock Watch Dog Register Set 1 to clear WDT status, then disable and lock WDT registers. More...
|
|
UINT8 | SmbusSpdWriteDisable |
| Offset 0x05A8 - SMBUS SPD Write Disable Set/Clear Smbus SPD Write Disable. More...
|
|
UINT8 | ChipsetInitMessage |
| Offset 0x05A9 - ChipsetInit HECI message Enable/Disable. More...
|
|
UINT8 | BypassPhySyncReset |
| Offset 0x05AA - Bypass ChipsetInit sync reset. More...
|
|
UINT8 | DidInitStat |
| Offset 0x05AB - Force ME DID Init Status Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, 4: Memory not preserved across reset, Set ME DID init stat value $EN_DIS.
|
|
UINT8 | DisableCpuReplacedPolling |
| Offset 0x05AC - CPU Replaced Polling Disable Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop $EN_DIS.
|
|
UINT8 | SendDidMsg |
| Offset 0x05AD - ME DID Message Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent the DID message from being sent) $EN_DIS.
|
|
UINT8 | DisableHeciRetry |
| Offset 0x05AE - Retry mechanism for HECI APIs Test, 0: disable, 1: enable, Enable/Disable HECI retry. More...
|
|
UINT8 | DisableMessageCheck |
| Offset 0x05AF - Check HECI message before send Test, 0: disable, 1: enable, Enable/Disable message check. More...
|
|
UINT8 | SkipMbpHob |
| Offset 0x05B0 - Skip MBP HOB Test, 0: disable, 1: enable, Enable/Disable MOB HOB. More...
|
|
UINT8 | HeciCommunication2 |
| Offset 0x05B1 - HECI2 Interface Communication Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. More...
|
|
UINT8 | KtDeviceEnable |
| Offset 0x05B2 - Enable KT device Test, 0: disable, 1: enable, Enable or Disable KT device. More...
|
|
UINT8 | IderDeviceEnable |
| Offset 0x05B3 - Enable IDEr Test, 0: disable, 1: enable, Enable or Disable IDEr. More...
|
|
UINT8 | ReservedFspmTestUpd [12] |
| Offset 0x05B4.
|
|