Configure Hewlett-Packard HP-GL/2 Devices
Set Device-Specific Configurations
Configure Xerox Devices
|
|
|
|
|
|
|
|
|
Although the primary configuration choice for Océ plotters is through a parallel port, Océ plotters can be supported through an RS-232C serial I/O port.
Set the Océ plotters at 9600 or 19,200 baud, with 8 data bits, 1 stop bit, and no parity. Serial port cabling instructions are available from your dealer or manufacturer.
For more information about using this driver, see the topic Océ Driver Custom Properties.