Supported Plotters

HP-GL/2 Configuration Information (HP-GL/2)

HP-GL/2 Configuration Information (HP-GL/2)

Cabling Instructions

 

Driver Custom Properties Reference > Autodesk-Supplied Plotter Drivers > HP-GL/2 Driver Custom Properties > HP-GL/2 Configuration Information (HP-GL/2) > 

Supported Plotters

List of emulated and obsolete Hewlett-Packard pen plotters and printers that can be configured using a HP-GL/2 device driver.

The following plotters can be emulated using the HP-GL/2 driver:

• HP DesignJet 750C Plus model C4708A (24")
• HP DesignJet 750C model C3196A (36")
• HP DesignJet 750C model C3195A (24")
• HP DesignJet 650C model C2859A (36")
• HP DesignJet 650C mode C2858B (24")
• HP DesignJet 350C model C4700A (36")
• HP DesignJet 350C model C4699A (24")
• HP DesignJet 250C model C3191A (36")
• HP DesignJet 250C model C3190A (24")
• HP DesignJet 700 monochrome model C4706B (36")
• HP DesignJet 700 monochrome model C4705B (24")
• HP DesignJet 600 model C2848A (36")
• HP DesignJet 600 model C2847A (24")
• HP DesignJet 330 model C4702A (36")
• HP DesignJet 330 model C4701A (24")
• HP DesignJet 230 model C4695A (36")
• HP DesignJet 230 model C4694A (24")
• HP DesignJet 220 model C3188A (36")
• HP DesignJet 220 model C3187A (24")
• HP DesignJet 200 (36")
• HP DesignJet 200 (24")
• HP DesignJet 430 monochrome model C4714A (36")
• HP DesignJet 430 monochrome model C4713A (24")
• HP DesignJet 450C color model C4716A (36")
• HP DesignJet 450C color model C4715A (24")

The HP-GL/2 driver also supports the following obsolete plotters:

• HP DraftMaster Rx model 7596B
• HP DraftMaster Mx model 7599
• HP DraftMaster Sx Plus Sheet Feed-NR model 7595C
• HP DraftMaster Rx Plus NR model 7596C
• HP DraftMaster Mx Plus NR model 7599B
• HP DraftPro Plus-NR model C3171A (36")
• HP DraftPro Plus-NR model C3170A (24")
• HP 7600 250
• HP 7600 255
• HP 7600 355
• HP 7600 240D (vector only, no raster)
• HP 7600 240E (vector only, no raster)
• LaserJet 4
• LaserJet 4M
• LaserJet 4MV
• LaserJet 4Si
• LaserJet 4SiMx
• LaserJet 4V
• LaserJet 5
• LaserJet 5M
• LaserJet 5Si
• LaserJet 5Si Mopier
• LaserJet 5SiMX
• LaserJet III
• LaserJet IIID
• LaserJet IIISi

For most of these devices you have a choice of a serial or parallel port connection. When this choice is available, the parallel port is recommended because it is faster and simpler. Pen plotters are only supported using serial connection.