Surface
If the
surface is erased or exploded, profiles and sections that reference
that surface become static.
Mirror
will create a copy but will not honor the mirror settings.
Point groups
used in the surface definition are included as part of the Wblock.
|
Point
When Wblocking
and Inserting points, or copying points, a dialog box is displayed
to resolve number conflicts.
|
Table
Wblocking a table also copies the required geometry.
For example, the points are copied along with the point table.
|
Alignment
Exploding
or erasing an alignment explodes or erases all objects that are
dependent on the alignment (such as profiles, profile views, sample
lines, sections, and section views).
Copying
the alignment will create an alignment with a new name in the same
site. All dependent objects will be copied and included with the
new alignment.
Wblock/Insert
will copy the alignment and all dependent objects into a new site.
|
Parcel (select
parcel label)
When copying or Wblocking a parcel, the dependent
parcel segments are included. If the objects are inserted into the
same drawing, a new site is created.
Only the
parcel labels can be moved.
|
Parcel
Segment Lines
Wblocking/Inserting
the parcel segment lines creates segment lines in a new site.
|
Grading
There are
two distinct copy operations which can be done on a grading object.
Copying the footprint feature line or individual target line creates
a new feature line in a new site. Copying the entire grading object
copies the footprint, target, and criteria.
The footprint
can be moved. The target line cannot be moved.
If the
grading criteria references a surface, the surface will be included
in a Wblock/Insert operation.
|
Profile
Erasing
a profile or section erases it from all profile or section views.
Profiles
and sections can only be moved vertically within a view.
|
Profile
View
If the
profile or profile view is Wblocked, all objects required for the
profile or profile view (such as the surface, alignment, profile,
sample lines, and sections) are copied. If the objects are copied
into the same drawing, a new site is created.
|
Sample
Line
You cannot copy or move a Sample Line
|
Section
Erasing
a profile or section erases it from all profile or section views.
Profiles
and sections can only be moved vertically within a view.
If the
sample line, section, or section view is Wblocked, all objects that
are required for the sample line, section, or section view (such
as the surface, alignment, sections, and sample lines) are copied.
If the objects are copied into the same drawing, a new site is created.
|
Assembly
The names
of assemblies and subassemblies are incremented when copied. Copying
an assembly copies the assembly and all dependent subassemblies.
Mirror
will create a copy but will not honor the mirror settings.
|
Corridor
Copying
or Wblocking a corridor copies all of the dependent data such as
assemblies, alignments, and surfaces.
|
Pipe
Network
Network Objects are not accessible through
Object Enabler environment.
|
Pipe
Copying
a network part profile will create a copy of the parent network
part (pipe or structure).
|
Structure
Copying,
mirroring, arraying, and offsetting pipes and structures updates
the references of any connected parts.
Copied
pipes and structures will be in the same network.
Moving
or rotating a structure causes any connected parts to move with
it. (the connections are maintained).
Moving
or rotating a pipe breaks the connection to any connected parts.
Scaling
a pipe or structure affects position but does not affect size.
Wblocking
pipes and structures copies all dependent objects.
|
Survey
Network
Using the copy command on a survey network creates
feature lines. The move command disassociates the figure from the
model.
|
Survey
Figure Using the offset command on a survey figure
generates a feature line object, not a survey figure. The
move commands disassociates the figure from the model. |
Mass Haul Line
Using the explode commands keeps the layer and
display settings, so entities will appear exactly the same as they
did in the object, excepting objects that are assigned “ByBlock”
color.
With the Extend command, the object can be selected
as an edge to extend to, but cannot be selected to extend
With the Trim command, the object can be selected
as a trim edge, but cannot be trimmed
If the mass hauls is Wblocked, all objects that
are required for it will be copied. Wblock/Insert is used when the
user keys in ^C and ^V.
|
Mass Haul View
Views are automatically named according to “Existing
Name” (#), where # is an increment. If a conflict is found, the
next counter will be used.
The copy command or right-click “Copy Selection”
will create a copy of the View with a name of “Existing Name” (#),
where # is an increment.
The explode command will keep the layer and
display settings, so entities will appear exactly the same as they
did in the object, excepting objects that are assigned “ByBlock”
color. Exploding the View will not explode the haul line.
The mirror command is successful on a View,
but it will not honor the mirror settings. You will get an additional
copy of the Profile View.
If the View is Wblocked, all objects that are
required for the View will be copied. Wblock/Insert is used when
the user keys in ^C and ^V
|