javax.jms (Java EE 5 SDK)

Java

previous page next page

概述

软件包

类

树

已过时

索引

帮助

Java EE 5 SDK

深圳电信培训中心.徐海蛟老师.

上一个软件包 下一个软件包

框架 无框架

Package javax.jms

The Java Message Service (JMS) API provides a common way for Java programs to create, send, receive and read an enterprise messaging system's messages.

参阅: 详细描述

接口摘要
BytesMessage	A `BytesMessage` object is used to send a message containing a stream of uninterpreted bytes.
Connection	A `Connection` object is a client's active connection to its JMS provider.
ConnectionConsumer	For application servers, `Connection` objects provide a special facility for creating a `ConnectionConsumer` (optional).
ConnectionFactory	A `ConnectionFactory` object encapsulates a set of connection configuration parameters that has been defined by an administrator.
ConnectionMetaData	A `ConnectionMetaData` object provides information describing the `Connection` object.
DeliveryMode	The delivery modes supported by the JMS API are `PERSISTENT` and `NON_PERSISTENT`.
Destination	A `Destination` object encapsulates a provider-specific address.
ExceptionListener	If a JMS provider detects a serious problem with a `Connection` object, it informs the `Connection` object's `ExceptionListener`, if one has been registered.
MapMessage	A `MapMessage` object is used to send a set of name-value pairs.
Message	The `Message` interface is the root interface of all JMS messages.
MessageConsumer	A client uses a `MessageConsumer` object to receive messages from a destination.
MessageListener	A `MessageListener` object is used to receive asynchronously delivered messages.
MessageProducer	A client uses a `MessageProducer` object to send messages to a destination.
ObjectMessage	An `ObjectMessage` object is used to send a message that contains a serializable object in the Java programming language ("Java object").
Queue	A `Queue` object encapsulates a provider-specific queue name.
QueueBrowser	A client uses a `QueueBrowser` object to look at messages on a queue without removing them.
QueueConnection	A `QueueConnection` object is an active connection to a point-to-point JMS provider.
QueueConnectionFactory	A client uses a `QueueConnectionFactory` object to create `QueueConnection` objects with a point-to-point JMS provider.
QueueReceiver	A client uses a `QueueReceiver` object to receive messages that have been delivered to a queue.
QueueSender	A client uses a `QueueSender` object to send messages to a queue.
QueueSession	A `QueueSession` object provides methods for creating `QueueReceiver`, `QueueSender`, `QueueBrowser`, and `TemporaryQueue` objects.
ServerSession	A `ServerSession` object is an application server object that is used by a server to associate a thread with a JMS session (optional).
ServerSessionPool	A `ServerSessionPool` object is an object implemented by an application server to provide a pool of `ServerSession` objects for processing the messages of a `ConnectionConsumer` (optional).
Session	A `Session` object is a single-threaded context for producing and consuming messages.
StreamMessage	A `StreamMessage` object is used to send a stream of primitive types in the Java programming language.
TemporaryQueue	A `TemporaryQueue` object is a unique `Queue` object created for the duration of a `Connection`.
TemporaryTopic	A `TemporaryTopic` object is a unique `Topic` object created for the duration of a `Connection`.
TextMessage	A `TextMessage` object is used to send a message containing a `java.lang.String`.
Topic	A `Topic` object encapsulates a provider-specific topic name.
TopicConnection	A `TopicConnection` object is an active connection to a publish/subscribe JMS provider.
TopicConnectionFactory	A client uses a `TopicConnectionFactory` object to create `TopicConnection` objects with a publish/subscribe JMS provider.
TopicPublisher	A client uses a `TopicPublisher` object to publish messages on a topic.
TopicSession	A `TopicSession` object provides methods for creating `TopicPublisher`, `TopicSubscriber`, and `TemporaryTopic` objects.
TopicSubscriber	A client uses a `TopicSubscriber` object to receive messages that have been published to a topic.
XAConnection	The `XAConnection` interface extends the capability of `Connection` by providing an `XASession` (optional).
XAConnectionFactory	The `XAConnectionFactory` interface is a base interface for the `XAQueueConnectionFactory` and `XATopicConnectionFactory` interfaces.
XAQueueConnection	An `XAQueueConnection` provides the same create options as `QueueConnection` (optional).
XAQueueConnectionFactory	An `XAQueueConnectionFactory` provides the same create options as a `QueueConnectionFactory` (optional).
XAQueueSession	An `XAQueueSession` provides a regular `QueueSession`, which can be used to create `QueueReceiver`, `QueueSender`, and `QueueBrowser` objects (optional).
XASession	The `XASession` interface extends the capability of `Session` by adding access to a JMS provider's support for the Java Transaction API (JTA) (optional).
XATopicConnection	An `XATopicConnection` provides the same create options as `TopicConnection` (optional).
XATopicConnectionFactory	An `XATopicConnectionFactory` provides the same create options as a `TopicConnectionFactory` (optional).
XATopicSession	An `XATopicSession` provides a regular `TopicSession`.

类摘要
QueueRequestor	The `QueueRequestor` helper class simplifies making service requests.
TopicRequestor	The `TopicRequestor` helper class simplifies making service requests.

Exception Summary
IllegalStateException	This exception is thrown when a method is invoked at an illegal or inappropriate time or if the provider is not in an appropriate state for the requested operation.
InvalidClientIDException	This exception must be thrown when a client attempts to set a connection's client ID to a value that is rejected by a provider.
InvalidDestinationException	This exception must be thrown when a destination either is not understood by a provider or is no longer valid.
InvalidSelectorException	This exception must be thrown when a JMS client attempts to give a provider a message selector with invalid syntax.
JMSException	This is the root class of all JMS API exceptions.
JMSSecurityException	This exception must be thrown when a provider rejects a user name/password submitted by a client.
MessageEOFException	This exception must be thrown when an unexpected end of stream has been reached when a `StreamMessage` or `BytesMessage` is being read.
MessageFormatException	This exception must be thrown when a JMS client attempts to use a data type not supported by a message or attempts to read data in a message as the wrong type.
MessageNotReadableException	This exception must be thrown when a JMS client attempts to read a write-only message.
MessageNotWriteableException	This exception must be thrown when a JMS client attempts to write to a read-only message.
ResourceAllocationException	This exception is thrown when a provider is unable to allocate the resources required by a method.
TransactionInProgressException	This exception is thrown when an operation is invalid because a transaction is in progress.
TransactionRolledBackException	This exception must be thrown when a call to `Session.commit` results in a rollback of the current transaction.

Package javax.jms Description

The Java Message Service (JMS) API provides a common way for Java programs to create, send, receive and read an enterprise messaging system's messages.

JMS Applications

A JMS application is composed of the following parts:

JMS Provider - a messaging system that implements the JMS API in addition to the other administrative and control functionality required of a full-featured messaging product
JMS Clients - the Java language programs that send and receive messages
Messages - objects that are used to communicate information between the clients of an application
Administered Objects - provider-specific objects that clients look up and use to interact portably with a JMS provider
Non-JMS Clients - clients that use a message system's native client API instead of the JMS API. If the application predated the availability of the JMS API, it is likely that it will include both JMS clients and non-JMS clients.

Administration

JMS providers differ significantly in their implementations of underlying messaging technology. There are also major differences in how a JMS provider's system is installed and administered.

For JMS clients to be portable, they must be isolated from these proprietary aspects of a provider. This is done by defining JMS administered objects that are created and customized by a provider's administrator and later used by clients. The client uses them through JMS interfaces that are portable. The administrator creates them using provider-specific facilities.

There are two types of JMS administered objects:

ConnectionFactory - the object a client uses to create a connection with a JMS provider
Destination - the object a client uses to specify the destination of messages it is sending and the source of messages it receives

Administered objects are placed in a Java Naming and Directory Interface^TM (JNDI) namespace by an administrator. A JMS client typically notes in its documentation the JMS administered objects it requires and how the JNDI names of these objects should be provided to it.

Two Messaging Styles

The JMS specification defines two styles of messaging: the point-to-point (PTP) or the publish-and-subscribe (Pub/Sub). These styles can be combined in a single application, or a given application can use just one of these styles.

The JMS API defines these two styles because they represent two of the dominant approaches to messaging currently in use. While the domains have many similarities, they also have some differences. JMS provides a unified programming interface to allow the client programmer to easily send and receive message using either domain, but the client programmer must also be aware of the differences between the domains. The key differences relate to how message persistence is handled, and the meaning of certain message attributes.

JMS Interfaces

When programming an application client, the programmer may either program using the domain specific interfaces, or may use the common interfaces. The key interfaces are listed in the table below. The preferred model is to use the common interfaces. The advantage to using the common interfaces is that both point-to-point and pub/sub tasks can be combined in one session, allowing transactions to operate over both domains.

In earlier versions of JMS, there were separate class hierarchies for the pub/sub and point-to-point programming models that had to be used. These class hierarchies are retained to support backward compatibility with earlier versions of the JMS API, but client developers are encouraged to use the common interfaces.

**Relationship of PTP and Pub/Sub interfaces**
JMS Common	PTP Domain	Pub/Sub Domain
ConnectionFactory	QueueConnectionFactory	TopicConnectionFactory
Connection	QueueConnection	TopicConnection
Destination	Queue	Topic
Session	QueueSession	TopicSession
MessageProducer	QueueSender	TopicPublisher
MessageConsumer	QueueReceiver	TopicSubscriber

The following provides a brief definition of these JMS concepts. See the PTP and Pub/Sub chapters of the JMS specification for more information.

ConnectionFactory - an administered object used by a client to create a Connection
Connection - an active connection to a JMS provider
Destination - an administered object that encapsulates the identity of a message destination
Session - a single-threaded context for sending and receiving messages
MessageProducer - an object created by a Session that is used for sending messages to a destination
MessageConsumer - an object created by a Session that is used for receiving messages sent to a destination

The term consume is used in this document to mean the receipt of a message by a JMS client; that is, a JMS provider has received a message and has given it to its client. Since the JMS API supports both synchronous and asynchronous receipt of messages, the term consume is used when there is no need to make a distinction between them.

The term produce is used as the most general term for sending a message. It means giving a message to a JMS provider for delivery to a destination.

Developing a JMS Application

Broadly speaking, a JMS application is one or more JMS clients that exchange messages. The application may also involve non-JMS clients; however, these clients use the JMS provider's native API in place of the JMS API.

A JMS application can be architected and deployed as a unit. In many cases, JMS clients are added incrementally to an existing application.

The message definitions used by an application may originate with JMS, or they may have been defined by the non-JMS part of the application.

Developing a JMS Client

A typical JMS client executes the following setup procedure:

Use JNDI to find a ConnectionFactory object
Use JNDI to find one or more Destination objects
Use the ConnectionFactory to create a JMS Connection. At this point, message delivery is inhibited
Use the Connection to create one or more JMS Sessions
Use a Session and the Destinations to create the MessageProducers and MessageConsumers needed
Start message delivery for the Connection. Messages will be delivered to MessageConsumers

At this point a client has the basic setup needed to produce and consume messages.

Package Specification

Java Message Service Specification - Version 1.1