|
STM32F401-Discovery BSP User Manual
|
This file contains the common defines and functions prototypes for stm32f401_discovery_audio.c driver. More...
#include "../Components/cs43l22/cs43l22.h"
#include "stm32f401_discovery.h"#include "../../../Middlewares/ST/STM32_Audio/Addons/PDM/pdm_filter.h"Go to the source code of this file.
Defines | |
| #define | I2S3 SPI3 |
| #define | I2S3_CLK_ENABLE() __HAL_RCC_SPI3_CLK_ENABLE() |
| #define | I2S3_CLK_DISABLE() __HAL_RCC_SPI3_CLK_DISABLE() |
| #define | I2S3_SCK_SD_WS_AF GPIO_AF6_SPI3 |
| #define | I2S3_SCK_SD_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | I2S3_MCK_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | I2S3_WS_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | I2S3_WS_PIN GPIO_PIN_4 |
| #define | I2S3_SCK_PIN GPIO_PIN_10 |
| #define | I2S3_SD_PIN GPIO_PIN_12 |
| #define | I2S3_MCK_PIN GPIO_PIN_7 |
| #define | I2S3_SCK_SD_GPIO_PORT GPIOC |
| #define | I2S3_WS_GPIO_PORT GPIOA |
| #define | I2S3_MCK_GPIO_PORT GPIOC |
| #define | I2S3_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
| #define | I2S3_DMAx_CLK_DISABLE() __HAL_RCC_DMA1_CLK_DISABLE() |
| #define | I2S3_DMAx_STREAM DMA1_Stream7 |
| #define | I2S3_DMAx_CHANNEL DMA_CHANNEL_0 |
| #define | I2S3_DMAx_IRQ DMA1_Stream7_IRQn |
| #define | I2S3_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD |
| #define | I2S3_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD |
| #define | DMA_MAX_SZE 0xFFFF |
| #define | I2S3_IRQHandler DMA1_Stream7_IRQHandler |
| #define | AUDIO_OUT_IRQ_PREPRIO 0x0E /* Select the preemption priority level(0 is the highest) */ |
| #define | I2S2 SPI2 |
| #define | I2S2_CLK_ENABLE() __HAL_RCC_SPI2_CLK_ENABLE() |
| #define | I2S2_CLK_DISABLE() __HAL_RCC_SPI2_CLK_DISABLE() |
| #define | I2S2_SCK_PIN GPIO_PIN_10 |
| #define | I2S2_SCK_GPIO_PORT GPIOB |
| #define | I2S2_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | I2S2_SCK_AF GPIO_AF5_SPI2 |
| #define | I2S2_MOSI_PIN GPIO_PIN_3 |
| #define | I2S2_MOSI_GPIO_PORT GPIOC |
| #define | I2S2_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | I2S2_MOSI_AF GPIO_AF5_SPI2 |
| #define | I2S2_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
| #define | I2S2_DMAx_CLK_DISABLE() __HAL_RCC_DMA1_CLK_DISABLE() |
| #define | I2S2_DMAx_STREAM DMA1_Stream3 |
| #define | I2S2_DMAx_CHANNEL DMA_CHANNEL_0 |
| #define | I2S2_DMAx_IRQ DMA1_Stream3_IRQn |
| #define | I2S2_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD |
| #define | I2S2_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD |
| #define | I2S2_IRQHandler DMA1_Stream3_IRQHandler |
| #define | AUDIO_IN_IRQ_PREPRIO 0x0F /* Select the preemption priority level(0 is the highest) */ |
| #define | AUDIODATA_SIZE 2 /* 16-bits audio data size */ |
| #define | AUDIO_OK 0 |
| #define | AUDIO_ERROR 1 |
| #define | AUDIO_TIMEOUT 2 |
| #define | DEFAULT_AUDIO_IN_FREQ I2S_AUDIOFREQ_16K |
| #define | DEFAULT_AUDIO_IN_BIT_RESOLUTION 16 |
| #define | DEFAULT_AUDIO_IN_CHANNEL_NBR 1 /* Mono = 1, Stereo = 2 */ |
| #define | DEFAULT_AUDIO_IN_VOLUME 64 |
| #define | INTERNAL_BUFF_SIZE 128*DEFAULT_AUDIO_IN_FREQ/16000*DEFAULT_AUDIO_IN_CHANNEL_NBR |
| #define | PCM_OUT_SIZE DEFAULT_AUDIO_IN_FREQ/1000 |
| #define | CHANNEL_DEMUX_MASK 0x55 |
| #define | DMA_MAX(_X_) (((_X_) <= DMA_MAX_SZE)? (_X_):DMA_MAX_SZE) |
Functions | |
| uint8_t | BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq) |
| Configures the audio peripherals. | |
| uint8_t | BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size) |
| Starts playing audio stream from a data buffer for a determined size. | |
| void | BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size) |
| Sends n-Bytes on the I2S interface. | |
| uint8_t | BSP_AUDIO_OUT_Pause (void) |
| Pauses the audio file stream. | |
| uint8_t | BSP_AUDIO_OUT_Resume (void) |
| Resumes the audio file streaming. | |
| uint8_t | BSP_AUDIO_OUT_Stop (uint32_t Option) |
| Stops audio playing and Power down the Audio Codec. | |
| uint8_t | BSP_AUDIO_OUT_SetVolume (uint8_t Volume) |
| Controls the current audio volume level. | |
| void | BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq) |
| Update the audio frequency. | |
| uint8_t | BSP_AUDIO_OUT_SetMute (uint32_t Cmd) |
| Enables or disables the MUTE mode by software. | |
| uint8_t | BSP_AUDIO_OUT_SetOutputMode (uint8_t Output) |
| Switch dynamically (while audio file is played) the output target (speaker or headphone). | |
| void | BSP_AUDIO_OUT_TransferComplete_CallBack (void) |
| Manages the DMA full Transfer complete event. | |
| void | BSP_AUDIO_OUT_HalfTransfer_CallBack (void) |
| Manages the DMA Half Transfer complete event. | |
| void | BSP_AUDIO_OUT_Error_CallBack (void) |
| Manages the DMA FIFO error event. | |
| void | BSP_AUDIO_OUT_ClockConfig (I2S_HandleTypeDef *hi2s, uint32_t AudioFreq, void *Params) |
| Clock Config. | |
| void | BSP_AUDIO_OUT_MspInit (I2S_HandleTypeDef *hi2s, void *Params) |
| AUDIO OUT I2S MSP Init. | |
| void | BSP_AUDIO_OUT_MspDeInit (I2S_HandleTypeDef *hi2s, void *Params) |
| De-Initializes BSP_AUDIO_OUT MSP. | |
| uint8_t | BSP_AUDIO_IN_Init (uint32_t AudioFreq, uint32_t BitRes, uint32_t ChnlNbr) |
| Initializes wave recording. | |
| uint8_t | BSP_AUDIO_IN_Record (uint16_t *pData, uint32_t Size) |
| Starts audio recording. | |
| uint8_t | BSP_AUDIO_IN_Stop (void) |
| Stops audio recording. | |
| uint8_t | BSP_AUDIO_IN_Pause (void) |
| Pauses the audio file stream. | |
| uint8_t | BSP_AUDIO_IN_Resume (void) |
| Resumes the audio file stream. | |
| uint8_t | BSP_AUDIO_IN_SetVolume (uint8_t Volume) |
| Controls the audio in volume level. | |
| uint8_t | BSP_AUDIO_IN_PDMToPCM (uint16_t *PDMBuf, uint16_t *PCMBuf) |
| Converts audio format from PDM to PCM. | |
| void | BSP_AUDIO_IN_TransferComplete_CallBack (void) |
| User callback when record buffer is filled. | |
| void | BSP_AUDIO_IN_HalfTransfer_CallBack (void) |
| Manages the DMA Half Transfer complete event. | |
| void | BSP_AUDIO_IN_Error_Callback (void) |
| Audio IN Error callback function. | |
| void | BSP_AUDIO_IN_ClockConfig (I2S_HandleTypeDef *hi2s, uint32_t AudioFreq, void *Params) |
| Audio In Clock Config. | |
| void | BSP_AUDIO_IN_MspInit (I2S_HandleTypeDef *hi2s, void *Params) |
| BSP AUDIO IN MSP Init. | |
| void | BSP_AUDIO_IN_MspDeInit (I2S_HandleTypeDef *hi2s, void *Params) |
| DeInitializes BSP_AUDIO_IN MSP. | |
Variables | |
| __IO uint16_t | AudioInVolume |
Detailed Description
This file contains the common defines and functions prototypes for stm32f401_discovery_audio.c driver.
- Attention:
© COPYRIGHT(c) 2017 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32f401_discovery_audio.h.
Generated on Thu Jan 19 2017 16:53:47 for STM32F401-Discovery BSP User Manual by
1.7.6.1