1. Launch the DAQ Assistant

LabView NI-DAQmx Measurement

1. Create a DAQmx Acquire Step

Complete the following steps to create a DAQmx Acquire step that measures analog input voltage.

  1. Open LabVIEW SignalExpress.
  2. Click Add Step, and select Acquire Signals»DAQmx Acquire»Analog Input»Voltage.
  3. In the Add Channels dialog box, select the physical channel(s) to use in the step.
Use to insert channels to the step.
Use to change the physical channels used in the step.
Use to remove selected channels from the step.
Previous: Before You Begin Next: 2. Configure the Step