Introduction to Taking an NI-DAQmx Measurement in SignalExpress

LabView NI-DAQmx Measurement

Introduction to Taking an NI-DAQmx Measurement in LabVIEW SignalExpress

This tutorial teaches you how to take an NI-DAQmx measurement in LabVIEW SignalExpress 2.x or later using the DAQmx Acquire Step and how to configure that step using the DAQ Assistant. You also will learn how to log this data to disk and how to play back the recorded data.

In this tutorial, you will complete the following:

  • Create a DAQmx Acquire Step
  • Configure the DAQmx Acquire Step using the DAQ Assistant in LabVIEW SignalExpress
  • Log acquired data to disk
  • Play back the recorded data
Note  If you are a new user of LabVIEW SignalExpress, refer to Getting Started with LabVIEW SignalExpress.
Next: Before You Begin