Before You Begin
To use this tutorial, you must have the following software and hardware installed in your system:
- LabVIEW SignalExpress 2.x or later
- NI-DAQmx (Refer to the LabVIEW SignalExpress Readme for versions of NI-DAQmx that support using the DAQ Assistant in LabVIEW SignalExpress.)
- A data acquisition (DAQ) device, physical or simulated, that is supported by NI-DAQmx and is connected to a voltage signal. Refer to the Measurement & Automation Explorer Help for NI-DAQmx for instructions on creating an NI-DAQmx simulated device. Refer to the NI-DAQ Readme file to see if NI-DAQmx supports your device.
Refer to the DAQ Getting Started Guide and the device documentation for information about installing and configuring the software and hardware.
|Previous: Introduction to Taking an NI-DAQmx Measurement in SignalExpress||Next: 1. Create a DAQmx Acquire Step|