niDMM_GetLastCalTemp
ViStatus = niDMM_GetLastCalTemp(ViSession Instrument_Handle, ViInt32 Cal_Type, ViReal64 *Temperature)
Purpose
Returns the Temperature during the last calibration procedure.
 |
Note The NI 4050 and NI 4060 are not supported. |
Parameters
| Input |
| Name |
Type |
Description |
| Instrument_Handle |
ViSession |
Identifies a particular instrument session. You obtain the Instrument_Handle parameter from niDMM_init or niDMM_InitWithOptions. The default is None.
|
| Cal_Type |
ViInt32 |
Specifies the type of calibration performed (external or self-calibration).
NIDMM_VAL_INTERNAL_AREA (default)
|
Note The NI 4065 does not support self-calibration. |
|
0 |
Self-Calibration |
| NIDMM_VAL_EXTERNAL_AREA |
1 |
External Calibration |
|
| Output |
| Name |
Type |
Description |
| Temperature |
ViReal64* |
Returns the Temperature during the last calibration.
|
Return Value
| Name |
Type |
Description |
| Status |
ViStatus |
Reports the Status of this operation. To obtain a text description of the status code, call
niDMM_error_message. To obtain additional information concerning the error condition, use
niDMM_GetError. |