niDMM_CalAdjustACFilter
ViStatus = niDMM_CalAdjustACFilter(ViSession Instrument_Handle, ViInt32 Mode, ViReal64 Range, ViReal64 Frequency, ViReal64 Expected_Value)
Purpose
For the NI 4070/4071/4072 only, calibrates the filter coefficients used for AC measurements of the supplied Mode and Range.
 |
Note Refer to the NI 4070/4072 6½ Digit FlexDMM Calibration Procedure or the NI 4071 7½–Digit FlexDMM Calibration Procedure before using this function. |
Parameters
| Input | ||
| Name | Type | Description |
| Instrument_Handle | ViSession | The session handle that you obtain from niDMM_InitExtCal. The handle identifies a particular instrument calibration session. |
| Mode | ViInt32 | Specifies the calibration Mode used to acquire the measurement.
For valid modes, refer to the NI 4065 6½ Digit DMM Calibration Procedure, the NI 4070/4072 6½ Digit FlexDMM Calibration Procedure, or the NI 4071 7½–Digit FlexDMM Calibration Procedure. |
| Range | ViReal64 | Specifies the Range to calibrate.
For valid ranges, refer to the NI 4070/4072 6½ Digit FlexDMM Calibration Procedure or the NI 4071 7½–Digit FlexDMM Calibration Procedure. Auto-ranging is not supported for calibration operations. |
| Frequency | ViReal64 | Specifies the Frequency of the input signal. |
| Expected_Value | ViReal64 | Specifies the Expected_Value of the measurement. |
Return Value
| Name | Type | Description |
| Status | ViStatus | Reports the Status of this operation. To obtain a text description of the status code, call niDMM_error_message. To obtain additional information concerning the error condition, use niDMM_GetError. |