Functions
void	I2SEnable (unsigned long ulBase, unsigned long ulMode)

void	I2SDisable (unsigned long ulBase)

void	I2SDataPut (unsigned long ulBase, unsigned long ulDataLine, unsigned long ulData)

long	I2SDataPutNonBlocking (unsigned long ulBase, unsigned long ulDataLine, unsigned long ulData)

void	I2SDataGet (unsigned long ulBase, unsigned long ulDataLine, unsigned long *pulData)

long	I2SDataGetNonBlocking (unsigned long ulBase, unsigned long ulDataLine, unsigned long *pulData)

void	I2SConfigSetExpClk (unsigned long ulBase, unsigned long ulI2SClk, unsigned long ulBitClk, unsigned long ulConfig)

void	I2STxFIFOEnable (unsigned long ulBase, unsigned long ulTxLevel, unsigned long ulWordsPerTransfer)

void	I2STxFIFODisable (unsigned long ulBase)

void	I2SRxFIFOEnable (unsigned long ulBase, unsigned long ulRxLevel, unsigned long ulWordsPerTransfer)

void	I2SRxFIFODisable (unsigned long ulBase)

unsigned long	I2STxFIFOStatusGet (unsigned long ulBase)

unsigned long	I2SRxFIFOStatusGet (unsigned long ulBase)

void	I2SSerializerConfig (unsigned long ulBase, unsigned long ulDataLine, unsigned long ulSerMode, unsigned long ulInActState)

void	I2SIntEnable (unsigned long ulBase, unsigned long ulIntFlags)

void	I2SIntDisable (unsigned long ulBase, unsigned long ulIntFlags)

unsigned long	I2SIntStatus (unsigned long ulBase)

void	I2SIntClear (unsigned long ulBase, unsigned long ulStatFlags)

void	I2SIntRegister (unsigned long ulBase, void(*pfnHandler)(void))

void	I2SIntUnregister (unsigned long ulBase)

void	I2STxActiveSlotSet (unsigned long ulBase, unsigned long ulActSlot)

void	I2SRxActiveSlotSet (unsigned long ulBase, unsigned long ulActSlot)

Detailed Description

Function Documentation

void I2SConfigSetExpClk	(	unsigned long	ulBase,
		unsigned long	ulI2SClk,
		unsigned long	ulBitClk,
		unsigned long	ulConfig
	)

Sets the configuration of the I2S module.

Parameters

ulBase	is the base address of the I2S module.
ulI2SClk	is the rate of the clock supplied to the I2S module.
ulBitClk	is the desired bit rate.
ulConfig	is the data format.

This function configures the I2S for operation in the specified data format. The bit rate is provided in the ulBitClk parameter and the data format in the ulConfig parameter.

The ulConfig parameter is the logical OR of three values: the slot size the data read/write port select, Master or Slave mode

Follwoing selects the Master-Slave mode -I2S_MODE_MASTER -I2S_MODE_SLAVE

Following selects the slot size: -I2S_SLOT_SIZE_24 -I2S_SLOT_SIZE_16

Following selects the data read/write port: -I2S_PORT_DMA -I2S_PORT_CPU

Returns: None.

void I2SDataGet	(	unsigned long	ulBase,
		unsigned long	ulDataLine,
		unsigned long *	pulData
	)

Waits for data from the specified data line.

Parameters

ulBase	is the base address of the I2S module.
ulDataLine	is one of the valid data lines.
pulData	is pointer to receive data variable.

This function gets data from the receive register for the specified data line. If there are no data available, this function waits until a receive before returning.

Returns: None.

long I2SDataGetNonBlocking	(	unsigned long	ulBase,
		unsigned long	ulDataLine,
		unsigned long *	pulData
	)

Receives data from the specified data line.

Parameters

ulBase	is the base address of the I2S module.
ulDataLine	is one of the valid data lines.
pulData	is pointer to receive data variable.

This function gets data from the receive register for the specified data line.

Returns: Returns 0 on success, -1 otherwise.

void I2SDataPut	(	unsigned long	ulBase,
		unsigned long	ulDataLine,
		unsigned long	ulData
	)

Waits to send data over the specified data line

Parameters

ulBase	is the base address of the I2S module.
ulDataLine	is one of the valid data lines.
ulData	is the data to be transmitted.

This function sends the ucData to the transmit register for the specified data line. If there is no space available, this function waits until there is space available before returning.

Returns: None.

long I2SDataPutNonBlocking	(	unsigned long	ulBase,
		unsigned long	ulDataLine,
		unsigned long	ulData
	)

Sends data over the specified data line

Parameters

ulBase	is the base address of the I2S module.
ulDataLine	is one of the valid data lines.
ulData	is the data to be transmitted.

This function writes the ucData to the transmit register for the specified data line. This function does not block, so if there is no space available, then -1 is returned, and the application must retry the function later.

Returns: Returns 0 on success, -1 otherwise.

void I2SDisable ( unsigned long ulBase )

Disables transmit and/or receive.

Parameters

ulBase is the base address of the I2S module.

This function disables transmit and/or receive from I2S module.

Returns: None.

void I2SEnable	(	unsigned long	ulBase,
		unsigned long	ulMode
	)

Enables transmit and/or receive.

Parameters

ulBase	is the base address of the I2S module.
ulMode	is one of the valid modes.

This function enables the I2S module in specified mode. The parameter ulMode should be one of the following

-I2S_MODE_TX_ONLY -I2S_MODE_TX_RX_SYNC

Returns: None.

void I2SIntClear	(	unsigned long	ulBase,
		unsigned long	ulStatFlags
	)

Clears I2S interrupt sources.

Parameters

ulBase	is the base address of the I2S module.
ulStatFlags	is a bit mask of the interrupt sources to be cleared.

The specified I2S interrupt sources are cleared, so that they no longer assert. This function must be called in the interrupt handler to keep the interrupt from being recognized again immediately upon exit.

The ulIntFlags parameter is the logical OR of any of the value describe in I2SIntStatus().

Returns: None.

void I2SIntDisable	(	unsigned long	ulBase,
		unsigned long	ulIntFlags
	)

Disables individual I2S interrupt sources.

Parameters

ulBase	is the base address of the I2S module.
ulIntFlags	is the bit mask of the interrupt sources to be disabled.

This function disables the indicated I2S interrupt sources. Only the sources that are enabled can be reflected to the processor interrupt; disabled sources have no effect on the processor.

The ulIntFlags parameter has the same definition as the ulIntFlags parameter to I2SIntEnable().

Returns: None.

void I2SIntEnable	(	unsigned long	ulBase,
		unsigned long	ulIntFlags
	)

Enables individual I2S interrupt sources.

Parameters

ulBase	is the base address of the I2S module.
ulIntFlags	is the bit mask of the interrupt sources to be enabled.

This function enables the indicated I2S interrupt sources. Only the sources that are enabled can be reflected to the processor interrupt; disabled sources have no effect on the processor.

The ulIntFlags parameter is the logical OR of any of the following:

-I2S_INT_XUNDRN -I2S_INT_XSYNCERR -I2S_INT_XLAST -I2S_INT_XDATA -I2S_INT_XSTAFRM -I2S_INT_XDMA -I2S_INT_ROVRN -I2S_INT_RSYNCERR -I2S_INT_RLAST -I2S_INT_RDATA -I2S_INT_RSTAFRM -I2S_INT_RDMA

Returns: None.

void I2SIntRegister	(	unsigned long	ulBase,
		void(*)(void)	pfnHandler
	)

Registers an interrupt handler for a I2S interrupt.

Parameters

ulBase	is the base address of the I2S module.
pfnHandler	is a pointer to the function to be called when the I2S interrupt occurs.

This function does the actual registering of the interrupt handler. This function enables the global interrupt in the interrupt controller; specific I2S interrupts must be enabled via I2SIntEnable(). It is the interrupt handler's responsibility to clear the interrupt source.

See also: IntRegister() for important information about registering interrupt handlers.

Returns: None.

unsigned long I2SIntStatus ( unsigned long ulBase )

Gets the current interrupt status.

Parameters

ulBase is the base address of the I2S module.

This function returns the raw interrupt status for I2S enumerated as a bit field of values: -I2S_STS_XERR -I2S_STS_XDMAERR -I2S_STS_XSTAFRM -I2S_STS_XDATA -I2S_STS_XLAST -I2S_STS_XSYNCERR -I2S_STS_XUNDRN -I2S_STS_XDMA -I2S_STS_RERR -I2S_STS_RDMAERR -I2S_STS_RSTAFRM -I2S_STS_RDATA -I2S_STS_RLAST -I2S_STS_RSYNCERR -I2S_STS_ROVERN -I2S_STS_RDMA

Returns: Returns the current interrupt status, enumerated as a bit field of values described above.

void I2SIntUnregister ( unsigned long ulBase )

Unregisters an interrupt handler for a I2S interrupt.

Parameters

ulBase is the base address of the I2S module.

This function does the actual unregistering of the interrupt handler. It clears the handler to be called when a I2S interrupt occurs. This function also masks off the interrupt in the interrupt controller so that the interrupt handler no longer is called.

See also: IntRegister() for important information about registering interrupt handlers.

Returns: None.

void I2SRxActiveSlotSet	(	unsigned long	ulBase,
		unsigned long	ulActSlot
	)

Set the active slots for Receiver

Parameters

ulBase	is the base address of the I2S module.
ulActSlot	is the bit-mask of activ slots

This function sets the active slots for the receiver. By default both the slots are active. The parameter ulActSlot is logical OR follwoing values: -I2S_ACT_SLOT_EVEN -I2S_ACT_SLOT_ODD

Returns: None.

void I2SRxFIFODisable ( unsigned long ulBase )

Disables receive FIFO.

Parameters

ulBase is the base address of the I2S module.

This function disables the I2S receive FIFO.

Returns: None.

void I2SRxFIFOEnable	(	unsigned long	ulBase,
		unsigned long	ulRxLevel,
		unsigned long	ulWordsPerTransfer
	)

Configure and enable receive FIFO.

Parameters

ulBase	is the base address of the I2S module.
ulRxLevel	is the receive FIFO DMA request level.
ulWordsPerTransfer	is the nuber of words transferred from the FIFO.

This function configures and enable I2S receive FIFO.

The parameter ulRxLevel sets the level at which receive DMA requests are generated. This should be non-zero integer multiple of number of serializers enabled as receivers.

The parameter ulWordsPerTransfer sets the number of words that are transferred to the receive FIFO from the data line(s). This value must equal the number of serializers used as receivers.

Returns: None.

unsigned long I2SRxFIFOStatusGet ( unsigned long ulBase )

Get the receive FIFO status.

Parameters

ulBase is the base address of the I2S module.

This function gets the number of 32-bit words currently in the receive FIFO.

Returns: Returns receive FIFO status.

void I2SSerializerConfig	(	unsigned long	ulBase,
		unsigned long	ulDataLine,
		unsigned long	ulSerMode,
		unsigned long	ulInActState
	)

Configure the serializer in specified mode.

Parameters

ulBase	is the base address of the I2S module.
ulDataLine	is the data line (serilizer) to be configured.
ulSerMode	is the required serializer mode.
ulInActState	sets the inactive state of the data line.

This function configure and enable the serializer associated with the given data line in specified mode.

The paramenter ulDataLine selects to data line to be configured and can be one of the following: -I2S_DATA_LINE_0 -I2S_DATA_LINE_1

The parameter ulSerMode can be one of the following: -I2S_SER_MODE_TX -I2S_SER_MODE_RX -I2S_SER_MODE_DISABLE

The parameter ulInActState can be one of the following -I2S_INACT_TRI_STATE -I2S_INACT_LOW_LEVEL -I2S_INACT_LOW_HIGH

Returns: Returns receive FIFO status.

void I2STxActiveSlotSet	(	unsigned long	ulBase,
		unsigned long	ulActSlot
	)

Set the active slots for Trasmitter

Parameters

ulBase	is the base address of the I2S module.
ulActSlot	is the bit-mask of activ slots

This function sets the active slots for the transmitter. By default both the slots are active. The parameter ulActSlot is logical OR follwoing values: -I2S_ACT_SLOT_EVEN -I2S_ACT_SLOT_ODD

Returns: None.

void I2STxFIFODisable ( unsigned long ulBase )

Disables transmit FIFO.

Parameters

ulBase is the base address of the I2S module.

This function disables the I2S transmit FIFO.

Returns: None.

void I2STxFIFOEnable	(	unsigned long	ulBase,
		unsigned long	ulTxLevel,
		unsigned long	ulWordsPerTransfer
	)

Configure and enable transmit FIFO.

Parameters

ulBase	is the base address of the I2S module.
ulTxLevel	is the transmit FIFO DMA request level.
ulWordsPerTransfer	is the nuber of words transferred from the FIFO.

This function configures and enable I2S transmit FIFO.

The parameter ulTxLevel sets the level at which transmit DMA requests are generated. This should be non-zero integer multiple of number of serializers enabled as transmitters

The parameter ulWordsPerTransfer sets the number of words that are transferred from the transmit FIFO to the data line(s). This value must equal the number of serializers used as transmitters.

Returns: None.

unsigned long I2STxFIFOStatusGet ( unsigned long ulBase )

Get the transmit FIFO status.

Parameters

ulBase is the base address of the I2S module.

This function gets the number of 32-bit words currently in the transmit FIFO.

Returns: Returns transmit FIFO status.

CC3200 Peripheral Driver Library User's Guide: I2S_api

CC3200 Peripheral Driver

Functions

Detailed Description

Function Documentation

Get in touch