|
B-L475E-IOT01 BSP User Manual
|
STM32L475E IOT01 board support package. More...
#include "stm32l4xx_hal.h"
Go to the source code of this file.
Defines | |
| #define | LEDn ((uint8_t)1) |
| Define for STM32L475E_IOT01 board. | |
| #define | LED2_PIN GPIO_PIN_14 |
| #define | LED2_GPIO_PORT GPIOB |
| #define | LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_ENABLE();}while(0) |
| #define | LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_DISABLE();}while(0) |
| #define | BUTTONn ((uint8_t)1) |
| #define | USER_BUTTON_PIN GPIO_PIN_13 |
| Wakeup push-button. | |
| #define | USER_BUTTON_GPIO_PORT GPIOC |
| #define | USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
| #define | USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn |
| #define | COMn ((uint8_t)1) |
| #define | DISCOVERY_COM1 USART1 |
| Definition for COM port1, connected to USART1. | |
| #define | DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE() |
| #define | DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE() |
| #define | DISCOVERY_COM1_TX_PIN GPIO_PIN_6 |
| #define | DISCOVERY_COM1_TX_GPIO_PORT GPIOB |
| #define | DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | DISCOVERY_COM1_TX_AF GPIO_AF7_USART1 |
| #define | DISCOVERY_COM1_RX_PIN GPIO_PIN_7 |
| #define | DISCOVERY_COM1_RX_GPIO_PORT GPIOB |
| #define | DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | DISCOVERY_COM1_RX_AF GPIO_AF7_USART1 |
| #define | DISCOVERY_COM1_IRQn USART1_IRQn |
| #define | DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();}} while(0) |
| #define | DISCOVERY_COMx_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_DISABLE();}} while(0) |
| #define | DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();}} while(0) |
| #define | DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_DISABLE();}} while(0) |
| #define | DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();}} while(0) |
| #define | DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_DISABLE();}} while(0) |
| #define | DISCOVERY_I2Cx I2C2 |
| #define | DISCOVERY_I2Cx_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE() |
| #define | DISCOVERY_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET() |
| #define | DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET() |
| #define | DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_10 |
| #define | DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_11 |
| #define | DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT GPIOB |
| #define | DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C2 |
| #define | DISCOVERY_I2Cx_EV_IRQn I2C2_EV_IRQn |
| #define | DISCOVERY_I2Cx_ER_IRQn I2C2_ER_IRQn |
| #define | LPS22HB_I2C_ADDRESS (uint8_t)0xBA |
| #define | HTS221_I2C_ADDRESS (uint8_t)0xBE |
| #define | TSENSOR_I2C_ADDRESS HTS221_I2C_ADDRESS |
Enumerations | |
| enum | Led_TypeDef { LED2 = 0, LED_GREEN = LED2 } |
| enum | Button_TypeDef { BUTTON_USER = 0 } |
| enum | ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } |
| enum | COM_TypeDef { COM1 = 0, COM2 = 0 } |
Functions | |
| uint32_t | BSP_GetVersion (void) |
| This method returns the STM32L475E IOT01 BSP Driver revision. | |
| void | BSP_LED_Init (Led_TypeDef Led) |
| Configures LEDs. | |
| void | BSP_LED_DeInit (Led_TypeDef Led) |
| DeInit LEDs. | |
| void | BSP_LED_On (Led_TypeDef Led) |
| Turns selected LED On. | |
| void | BSP_LED_Off (Led_TypeDef Led) |
| Turns selected LED Off. | |
| void | BSP_LED_Toggle (Led_TypeDef Led) |
| Toggles the selected LED. | |
| void | BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef ButtonMode) |
| Configures button GPIO and EXTI Line. | |
| void | BSP_PB_DeInit (Button_TypeDef Button) |
| Push Button DeInit. | |
| uint32_t | BSP_PB_GetState (Button_TypeDef Button) |
| Returns the selected button state. | |
| void | BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *husart) |
| Configures COM port. | |
| void | BSP_COM_DeInit (COM_TypeDef COM, UART_HandleTypeDef *huart) |
| DeInit COM port. | |
Detailed Description
STM32L475E IOT01 board support package.
- Attention:
© Copyright (c) 2017 STMicroelectronics International N.V. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted, provided that the following conditions are met:
1. Redistribution of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of other contributors to this software may be used to endorse or promote products derived from this software without specific written permission. 4. This software, including modifications and/or derivative works of this software, must execute solely and exclusively on microcontroller or microprocessor devices manufactured by or for STMicroelectronics. 5. Redistribution and use of this software other than as permitted under this license is void and will automatically terminate your rights under this license.
THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32l475e_iot01.h.
Generated on Thu Mar 16 2017 10:38:32 for B-L475E-IOT01 BSP User Manual by
1.7.6.1