MLINESTYLE

AutoCAD DXF Format

 
MLINESTYLE
 
 
 

The following group codes are used by MLINESTYLE objects. In addition to the group codes described here, see Common Group Codes for Objects. For information about abbreviations and formatting used in this table, see Formatting Conventions in This Reference.

MLINESTYLE group codes

Group code

Description

0

Object name (MLINESTYLE)

5

Handle

102

Start of persistent reactors group; always “{ACAD_REACTORS” (persistent reactors group appears in all dictionaries except the main dictionary)

330

Soft-pointer ID/handle to owner dictionary. For MLINESTYLE objects this is always the ACAD_MLINESTYLE entry of the named object dictionary

102

End of persistent reactors group; always “}”

100

Subclass marker (AcDbMlineStyle)

2

Mline style name

70

Flags (bit-coded):

1 =Fill on

2 = Display miters

16 = Start square end (line) cap

32 = Start inner arcs cap

64 = Start round (outer arcs) cap

256 = End square (line) cap

512 = End inner arcs cap

1024 = End round (outer arcs) cap

3

Style description (string, 255 characters maximum)

62

Fill color (integer, default = 256)

51

Start angle (real, default is 90 degrees)

52

End angle (real, default is 90 degrees)

71

Number of elements

49

Element offset (real, no default). Multiple entries can exist; one entry for each element

62

Element color (integer, default = 0). Multiple entries can exist; one entry for each element

6

Element linetype (string, default = BYLAYER). Multiple entries can exist; one entry for each element

The 2 group codes in mline entities and MLINESTYLE objects are redundant fields. These groups should not be modified under any circumstances, although it is safe to read them and use their values. The correct fields to modify are

Mline

The 340 group in the same object, which indicates the proper MLINESTYLE object.

Mlinestyle

The 3 group value in the MLINESTYLE dictionary, which precedes the 350 group that has the handle or entity name of the current mlinestyle.