STM32L4R9I-Discovery BSP User Manual
|
This file contains the common defines and functions prototypes for the stm32l4r9i_discovery_psram.c driver. More...
#include "stm32l4xx_hal.h"
Go to the source code of this file.
Defines | |
#define | PSRAM_OK ((uint8_t)0x00) |
PSRAM status structure definition. | |
#define | PSRAM_ERROR ((uint8_t)0x01) |
#define | PSRAM_DEVICE_ADDR ((uint32_t)0x60000000) |
#define | PSRAM_DEVICE_SIZE ((uint32_t)0x400000) /* PSRAM device size in Bytes */ |
#define | PSRAM_MEMORY_WIDTH FMC_NORSRAM_MEM_BUS_WIDTH_16 |
#define | PSRAM_BURSTACCESS FMC_BURST_ACCESS_MODE_DISABLE |
#define | PSRAM_WRITEBURST FMC_WRITE_BURST_DISABLE |
#define | CONTINUOUSCLOCK_FEATURE FMC_CONTINUOUS_CLOCK_SYNC_ONLY |
#define | __PSRAM_DMAx_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE |
#define | __PSRAM_DMAx_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE |
#define | PSRAM_DMAx_INSTANCE DMA2_Channel3 |
#define | PSRAM_DMAx_IRQn DMA2_Channel3_IRQn |
#define | BSP_PSRAM_DMA_IRQHandler DMA2_Channel3_IRQHandler |
Functions | |
uint8_t | BSP_PSRAM_Init (void) |
Initializes the PSRAM device. | |
uint8_t | BSP_PSRAM_DeInit (void) |
DeInitializes the PSRAM device. | |
uint8_t | BSP_PSRAM_ReadData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize) |
Reads an amount of data from the PSRAM device in polling mode. | |
uint8_t | BSP_PSRAM_ReadData_DMA (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize) |
Reads an amount of data from the PSRAM device in DMA mode. | |
uint8_t | BSP_PSRAM_WriteData (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize) |
Writes an amount of data from the PSRAM device in polling mode. | |
uint8_t | BSP_PSRAM_WriteData_DMA (uint32_t uwStartAddress, uint16_t *pData, uint32_t uwDataSize) |
Writes an amount of data from the PSRAM device in DMA mode. | |
void | BSP_PSRAM_MspInit (SRAM_HandleTypeDef *hsram, void *Params) |
Initializes PSRAM MSP. | |
void | BSP_PSRAM_MspDeInit (SRAM_HandleTypeDef *hsram, void *Params) |
DeInitializes SRAM MSP. | |
Variables | |
SRAM_HandleTypeDef | psramHandle |
Detailed Description
This file contains the common defines and functions prototypes for the stm32l4r9i_discovery_psram.c driver.
- Attention:
© COPYRIGHT(c) 2016 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32l4r9i_discovery_psram.h.
Generated on Fri Oct 13 2017 02:37:42 for STM32L4R9I-Discovery BSP User Manual by 1.7.6.1