COM Constants

Defines
#define	COMn   1
#define	DISCOVERY_COM1   USART2
	Definition for COM port1, connected to USART2 (ST-Link USB Virtual Com Port)
#define	DISCOVERY_COM1_CLK_ENABLE()   __HAL_RCC_USART2_CLK_ENABLE()
#define	DISCOVERY_COM1_CLK_DISABLE()   __HAL_RCC_USART2_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_PIN   GPIO_PIN_2
#define	DISCOVERY_COM1_TX_GPIO_PORT   GPIOA
#define	DISCOVERY_COM1_TX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	DISCOVERY_COM1_TX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	DISCOVERY_COM1_TX_AF   GPIO_AF7_USART2
#define	DISCOVERY_COM1_RX_PIN   GPIO_PIN_3
#define	DISCOVERY_COM1_RX_GPIO_PORT   GPIOA
#define	DISCOVERY_COM1_RX_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOA_CLK_ENABLE()
#define	DISCOVERY_COM1_RX_GPIO_CLK_DISABLE()   __HAL_RCC_GPIOA_CLK_DISABLE()
#define	DISCOVERY_COM1_RX_AF   GPIO_AF7_USART2
#define	DISCOVERY_COM1_IRQn   USART2_IRQn
#define	DISCOVERY_COMx_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();}} while(0)
#define	DISCOVERY_COMx_CLK_DISABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_DISABLE();}} while(0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();}} while(0)
#define	DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_DISABLE();}} while(0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();}} while(0)
#define	DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_DISABLE();}} while(0)

---

Define Documentation

#define COMn   1

Definition at line 210 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1   USART2

Definition for COM port1, connected to USART2 (ST-Link USB Virtual Com Port)

Definition at line 215 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_CLK_DISABLE

(

)

__HAL_RCC_USART2_CLK_DISABLE()

Definition at line 217 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_CLK_ENABLE

(

)

__HAL_RCC_USART2_CLK_ENABLE()

Definition at line 216 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_IRQn   USART2_IRQn

Definition at line 231 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_RX_AF   GPIO_AF7_USART2

Definition at line 229 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE

(

)

__HAL_RCC_GPIOA_CLK_DISABLE()

Definition at line 228 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE

(

)

__HAL_RCC_GPIOA_CLK_ENABLE()

Definition at line 227 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_RX_GPIO_PORT   GPIOA

Definition at line 226 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_RX_PIN   GPIO_PIN_3

Definition at line 225 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_TX_AF   GPIO_AF7_USART2

Definition at line 223 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE

(

)

__HAL_RCC_GPIOA_CLK_DISABLE()

Definition at line 222 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE

(

)

__HAL_RCC_GPIOA_CLK_ENABLE()

Definition at line 221 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_TX_GPIO_PORT   GPIOA

Definition at line 220 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COM1_TX_PIN   GPIO_PIN_2

Definition at line 219 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COMx_CLK_DISABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_DISABLE();}} while(0)

Definition at line 235 of file stm32l4r9i_discovery.h.

Referenced by BSP_COM_DeInit().

#define DISCOVERY_COMx_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();}} while(0)

Definition at line 234 of file stm32l4r9i_discovery.h.

Referenced by BSP_COM_Init().

#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_DISABLE();}} while(0)

Definition at line 241 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();}} while(0)

Definition at line 240 of file stm32l4r9i_discovery.h.

Referenced by BSP_COM_Init().

#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_DISABLE();}} while(0)

Definition at line 238 of file stm32l4r9i_discovery.h.

#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE

(

__INDEX__

)

do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();}} while(0)

Definition at line 237 of file stm32l4r9i_discovery.h.

Referenced by BSP_COM_Init().