STM32F1xx_Nucleo BSP User Manual
|
Defines | |
#define | NUCLEO_SPIx SPI1 |
#define | NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() |
#define | NUCLEO_SPIx_SCK_GPIO_PORT GPIOA |
#define | NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 |
#define | NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA |
#define | NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 |
#define | NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 |
#define | NUCLEO_SPIx_TIMEOUT_MAX 1000 |
#define | SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) |
SD Control Lines management. | |
#define | SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) |
#define | LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) |
LCD Control Lines management. | |
#define | LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) |
#define | LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) |
#define | LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) |
#define | SD_CS_PIN GPIO_PIN_5 |
SD Control Interface pins (shield D4) | |
#define | SD_CS_GPIO_PORT GPIOB |
#define | SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | LCD_CS_PIN GPIO_PIN_6 |
LCD Control Interface pins (shield D10) | |
#define | LCD_CS_GPIO_PORT GPIOB |
#define | LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
#define | LCD_DC_PIN GPIO_PIN_9 |
LCD Data/Command Interface pins. | |
#define | LCD_DC_GPIO_PORT GPIOA |
#define | LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
#define | LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
#define | NUCLEO_ADCx ADC1 |
ADC Interface pins used to detect motion of Joystick available on Adafruit 1.8" TFT shield. | |
#define | NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC1_CLK_ENABLE() |
#define | NUCLEO_ADCx_CLK_DISABLE() __HAL_RCC_ADC1_CLK_DISABLE() |
#define | NUCLEO_ADCx_GPIO_PORT GPIOB |
#define | NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 |
#define | NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
#define | NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
Define Documentation
#define LCD_CS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 205 of file stm32f1xx_nucleo.h.
#define LCD_CS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 204 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init().
#define LCD_CS_GPIO_PORT GPIOB |
Definition at line 203 of file stm32f1xx_nucleo.h.
#define LCD_CS_HIGH | ( | ) | HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) |
Definition at line 187 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init(), LCD_IO_WriteMultipleData(), LCD_IO_WriteReg(), and SD_IO_Init().
#define LCD_CS_LOW | ( | ) | HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) |
LCD Control Lines management.
Definition at line 186 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_WriteMultipleData(), and LCD_IO_WriteReg().
#define LCD_CS_PIN GPIO_PIN_6 |
LCD Control Interface pins (shield D10)
Definition at line 202 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init(), and SD_IO_Init().
#define LCD_DC_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 213 of file stm32f1xx_nucleo.h.
#define LCD_DC_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 212 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init().
#define LCD_DC_GPIO_PORT GPIOA |
Definition at line 211 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init().
#define LCD_DC_HIGH | ( | ) | HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) |
Definition at line 189 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_WriteMultipleData().
#define LCD_DC_LOW | ( | ) | HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) |
Definition at line 188 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_WriteReg().
#define LCD_DC_PIN GPIO_PIN_9 |
LCD Data/Command Interface pins.
Definition at line 210 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init().
#define NUCLEO_ADCx ADC1 |
ADC Interface pins used to detect motion of Joystick available on Adafruit 1.8" TFT shield.
Definition at line 220 of file stm32f1xx_nucleo.h.
Referenced by ADCx_DeInit(), and ADCx_Init().
#define NUCLEO_ADCx_CLK_DISABLE | ( | ) | __HAL_RCC_ADC1_CLK_DISABLE() |
Definition at line 222 of file stm32f1xx_nucleo.h.
Referenced by ADCx_MspDeInit().
#define NUCLEO_ADCx_CLK_ENABLE | ( | ) | __HAL_RCC_ADC1_CLK_ENABLE() |
Definition at line 221 of file stm32f1xx_nucleo.h.
Referenced by ADCx_MspInit().
#define NUCLEO_ADCx_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 227 of file stm32f1xx_nucleo.h.
#define NUCLEO_ADCx_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 226 of file stm32f1xx_nucleo.h.
Referenced by ADCx_MspInit().
#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 |
Definition at line 225 of file stm32f1xx_nucleo.h.
Referenced by ADCx_MspDeInit(), and ADCx_MspInit().
#define NUCLEO_ADCx_GPIO_PORT GPIOB |
Definition at line 224 of file stm32f1xx_nucleo.h.
Referenced by ADCx_MspDeInit(), and ADCx_MspInit().
#define NUCLEO_SPIx SPI1 |
Definition at line 156 of file stm32f1xx_nucleo.h.
Referenced by SPIx_Init().
#define NUCLEO_SPIx_CLK_ENABLE | ( | ) | __HAL_RCC_SPI1_CLK_ENABLE() |
Definition at line 157 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 166 of file stm32f1xx_nucleo.h.
#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 165 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA |
Definition at line 164 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 |
Definition at line 167 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 |
Definition at line 168 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOA_CLK_DISABLE() |
Definition at line 162 of file stm32f1xx_nucleo.h.
#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOA_CLK_ENABLE() |
Definition at line 161 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA |
Definition at line 159 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 |
Definition at line 160 of file stm32f1xx_nucleo.h.
Referenced by SPIx_MspInit().
#define NUCLEO_SPIx_TIMEOUT_MAX 1000 |
Definition at line 174 of file stm32f1xx_nucleo.h.
#define SD_CS_GPIO_CLK_DISABLE | ( | ) | __HAL_RCC_GPIOB_CLK_DISABLE() |
Definition at line 197 of file stm32f1xx_nucleo.h.
#define SD_CS_GPIO_CLK_ENABLE | ( | ) | __HAL_RCC_GPIOB_CLK_ENABLE() |
Definition at line 196 of file stm32f1xx_nucleo.h.
Referenced by SD_IO_Init().
#define SD_CS_GPIO_PORT GPIOB |
Definition at line 195 of file stm32f1xx_nucleo.h.
Referenced by LCD_IO_Init(), and SD_IO_Init().
#define SD_CS_HIGH | ( | ) | HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) |
Definition at line 181 of file stm32f1xx_nucleo.h.
Referenced by SD_IO_CSState(), and SD_IO_Init().
#define SD_CS_LOW | ( | ) | HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) |
SD Control Lines management.
Definition at line 180 of file stm32f1xx_nucleo.h.
Referenced by SD_IO_CSState().
#define SD_CS_PIN GPIO_PIN_5 |
SD Control Interface pins (shield D4)
Definition at line 194 of file stm32f1xx_nucleo.h.
Referenced by SD_IO_Init().
Generated on Fri Mar 3 2017 19:17:51 for STM32F1xx_Nucleo BSP User Manual by 1.7.6.1