STM324xG_EVAL BSP User Manual
|
This file contains the common defines and functions prototypes for the stm324xg_eval_audio.c driver. More...
Go to the source code of this file.
Defines | |
#define | AUDIO_RESET_PIN IO_PIN_2 |
#define | AUDIO_I2Sx SPI2 |
#define | AUDIO_I2Sx_CLK_ENABLE() __SPI2_CLK_ENABLE() |
#define | AUDIO_I2Sx_SCK_SD_WS_AF GPIO_AF5_SPI2 |
#define | AUDIO_I2Sx_SCK_SD_WS_CLK_ENABLE() __GPIOI_CLK_ENABLE() |
#define | AUDIO_I2Sx_MCK_CLK_ENABLE() __GPIOC_CLK_ENABLE() |
#define | AUDIO_I2Sx_WS_PIN GPIO_PIN_0 |
#define | AUDIO_I2Sx_SCK_PIN GPIO_PIN_1 |
#define | AUDIO_I2Sx_SD_PIN GPIO_PIN_3 |
#define | AUDIO_I2Sx_MCK_PIN GPIO_PIN_6 |
#define | AUDIO_I2Sx_SCK_SD_WS_GPIO_PORT GPIOI |
#define | AUDIO_I2Sx_MCK_GPIO_PORT GPIOC |
#define | AUDIO_I2Sx_DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE() |
#define | AUDIO_I2Sx_DMAx_STREAM DMA1_Stream4 |
#define | AUDIO_I2Sx_DMAx_CHANNEL DMA_CHANNEL_0 |
#define | AUDIO_I2Sx_DMAx_IRQ DMA1_Stream4_IRQn |
#define | AUDIO_I2Sx_DMAx_PERIPH_DATA_SIZE DMA_PDATAALIGN_HALFWORD |
#define | AUDIO_I2Sx_DMAx_MEM_DATA_SIZE DMA_MDATAALIGN_HALFWORD |
#define | DMA_MAX_SZE 0xFFFF |
#define | AUDIO_I2Sx_DMAx_IRQHandler DMA1_Stream4_IRQHandler |
#define | AUDIO_IRQ_PREPRIO 5 /* Select the preemption priority level(0 is the highest) */ |
#define | AUDIODATA_SIZE 2 /* 16-bits audio data size */ |
#define | AUDIO_OK 0x00 |
#define | AUDIO_ERROR 0x01 |
#define | AUDIO_TIMEOUT 0x02 |
#define | CODEC_RESET_DELAY 5 |
#define | DMA_MAX(x) (((x) <= DMA_MAX_SZE)? (x):DMA_MAX_SZE) |
Functions | |
uint8_t | BSP_AUDIO_OUT_Init (uint16_t OutputDevice, uint8_t Volume, uint32_t AudioFreq) |
Configures the audio peripherals. | |
uint8_t | BSP_AUDIO_OUT_Play (uint16_t *pBuffer, uint32_t Size) |
Starts playing audio stream from a data buffer for a determined size. | |
void | BSP_AUDIO_OUT_ChangeBuffer (uint16_t *pData, uint16_t Size) |
Sends n-Bytes on the I2S interface. | |
uint8_t | BSP_AUDIO_OUT_Pause (void) |
Pauses the audio file stream. | |
uint8_t | BSP_AUDIO_OUT_Resume (void) |
Resumes the audio file stream. | |
uint8_t | BSP_AUDIO_OUT_Stop (uint32_t Option) |
Stops audio playing and Power down the Audio Codec. | |
uint8_t | BSP_AUDIO_OUT_SetVolume (uint8_t Volume) |
Controls the current audio volume level. | |
void | BSP_AUDIO_OUT_SetFrequency (uint32_t AudioFreq) |
Updates the audio frequency. | |
uint8_t | BSP_AUDIO_OUT_SetMute (uint32_t Cmd) |
Enables or disables the MUTE mode by software. | |
uint8_t | BSP_AUDIO_OUT_SetOutputMode (uint8_t Output) |
Switch dynamically (while audio file is played) the output target (speaker or headphone). | |
void | BSP_AUDIO_OUT_TransferComplete_CallBack (void) |
Manages the DMA full Transfer complete event. | |
void | BSP_AUDIO_OUT_HalfTransfer_CallBack (void) |
Manages the DMA Half Transfer complete event. | |
void | BSP_AUDIO_OUT_Error_CallBack (void) |
Manages the DMA FIFO error event. |
Detailed Description
This file contains the common defines and functions prototypes for the stm324xg_eval_audio.c driver.
- Attention:
© COPYRIGHT(c) 2016 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm324xg_eval_audio.h.
Generated on Fri Jan 15 2016 14:22:29 for STM324xG_EVAL BSP User Manual by
