Functions
uint8_t	BSP_SD_Init (void)
	Initializes the SD card device.
uint8_t	BSP_SD_ITConfig (void)
	Configures Interrupt mode for SD detection pin.
void	BSP_SD_DetectIT (void)
	SD detect IT treatment.
void	BSP_SD_DetectCallback (void)
	SD detect IT detection callback.
uint8_t	BSP_SD_ReadBlocks (uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
	Reads block(s) from a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_WriteBlocks (uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
	Writes block(s) to a specified address in an SD card, in polling mode.
uint8_t	BSP_SD_ReadBlocks_DMA (uint32_t *pData, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
	Reads block(s) from a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_WriteBlocks_DMA (uint32_t *pData, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumOfBlocks)
	Writes block(s) to a specified address in an SD card, in DMA mode.
uint8_t	BSP_SD_Erase (uint64_t StartAddr, uint64_t EndAddr)
	Erases the specified memory area of the given SD card.
void	BSP_SD_IRQHandler (void)
	Handles SD card interrupt request.
void	BSP_SD_DMA_Tx_IRQHandler (void)
	Handles SD DMA Tx transfer interrupt request.
void	BSP_SD_DMA_Rx_IRQHandler (void)
	Handles SD DMA Rx transfer interrupt request.
HAL_SD_TransferStateTypedef	BSP_SD_GetStatus (void)
	Gets the current SD card data status.
void	BSP_SD_GetCardInfo (HAL_SD_CardInfoTypedef *CardInfo)
	Get SD information about specific SD card.
uint8_t	BSP_SD_IsDetected (void)
	Detects if SD card is correctly plugged in the memory slot or not.

Function Documentation

void BSP_SD_DetectCallback ( void )

SD detect IT detection callback.

Definition at line 238 of file stm324xg_eval_sd.c.

Referenced by BSP_SD_DetectIT().

void BSP_SD_DetectIT ( void )

SD detect IT treatment.

Definition at line 228 of file stm324xg_eval_sd.c.

References BSP_SD_DetectCallback().

void BSP_SD_DMA_Rx_IRQHandler ( void )

Handles SD DMA Rx transfer interrupt request.

Definition at line 497 of file stm324xg_eval_sd.c.

References uSdHandle.

void BSP_SD_DMA_Tx_IRQHandler ( void )

Handles SD DMA Tx transfer interrupt request.

Definition at line 489 of file stm324xg_eval_sd.c.

References uSdHandle.

uint8_t BSP_SD_Erase	(	uint64_t	StartAddr,
		uint64_t	EndAddr
	)

Erases the specified memory area of the given SD card.

Parameters:

StartAddr,:	Start byte address
EndAddr,:	End byte address

Return values:

SD status

Definition at line 360 of file stm324xg_eval_sd.c.

References MSD_ERROR, MSD_OK, and uSdHandle.

void BSP_SD_GetCardInfo ( HAL_SD_CardInfoTypedef * CardInfo )

Get SD information about specific SD card.

Parameters:

CardInfo,: Pointer to HAL_SD_CardInfoTypedef structure

Definition at line 519 of file stm324xg_eval_sd.c.

References uSdHandle.

HAL_SD_TransferStateTypedef BSP_SD_GetStatus ( void )

Gets the current SD card data status.

Return values:

Data	transfer state. This value can be one of the following values: SD_TRANSFER_OK: No data transfer is acting SD_TRANSFER_BUSY: Data transfer is acting SD_TRANSFER_ERROR: Data transfer error

Definition at line 510 of file stm324xg_eval_sd.c.

References uSdHandle.

uint8_t BSP_SD_Init ( void )

Initializes the SD card device.

Return values:

SD status.

Definition at line 143 of file stm324xg_eval_sd.c.

References BSP_SD_IsDetected(), MSD_ERROR, MSD_OK, SD_MspInit(), SD_PRESENT, uSdCardInfo, and uSdHandle.

void BSP_SD_IRQHandler ( void )

Handles SD card interrupt request.

Definition at line 481 of file stm324xg_eval_sd.c.

References uSdHandle.

uint8_t BSP_SD_IsDetected ( void )

Detects if SD card is correctly plugged in the memory slot or not.

Return values:

Returns if SD is detected or not

Definition at line 213 of file stm324xg_eval_sd.c.

References SD_DETECT_GPIO_PORT, SD_DETECT_PIN, SD_NOT_PRESENT, and SD_PRESENT.

Referenced by BSP_SD_Init().

uint8_t BSP_SD_ITConfig ( void )

Configures Interrupt mode for SD detection pin.

Return values:

Returns 0

Definition at line 191 of file stm324xg_eval_sd.c.

References SD_DETECT_GPIO_PORT, SD_DETECT_IRQn, and SD_DETECT_PIN.

uint8_t BSP_SD_ReadBlocks	(	uint32_t *	pData,
		uint64_t	ReadAddr,
		uint32_t	BlockSize,
		uint32_t	NumOfBlocks
	)

Reads block(s) from a specified address in an SD card, in polling mode.

Parameters:

pData,:	Pointer to the buffer that will contain the data to transmit
ReadAddr,:	Address from where data is to be read
BlockSize,:	SD card data block size, that should be 512
NumOfBlocks,:	Number of SD blocks to read

Return values:

SD status

Definition at line 254 of file stm324xg_eval_sd.c.

References MSD_ERROR, MSD_OK, and uSdHandle.

uint8_t BSP_SD_ReadBlocks_DMA	(	uint32_t *	pData,
		uint64_t	ReadAddr,
		uint32_t	BlockSize,
		uint32_t	NumOfBlocks
	)

Reads block(s) from a specified address in an SD card, in DMA mode.

Parameters:

pData,:	Pointer to the buffer that will contain the data to transmit
ReadAddr,:	Address from where data is to be read
BlockSize,:	SD card data block size, that should be 512
NumOfBlocks,:	Number of SD blocks to read

Return values:

SD status

Definition at line 294 of file stm324xg_eval_sd.c.

References MSD_ERROR, MSD_OK, SD_DATATIMEOUT, and uSdHandle.

uint8_t BSP_SD_WriteBlocks	(	uint32_t *	pData,
		uint64_t	WriteAddr,
		uint32_t	BlockSize,
		uint32_t	NumOfBlocks
	)

Writes block(s) to a specified address in an SD card, in polling mode.

Parameters:

pData,:	Pointer to the buffer that will contain the data to transmit
WriteAddr,:	Address from where data is to be written
BlockSize,:	SD card data block size, that should be 512
NumOfBlocks,:	Number of SD blocks to write

Return values:

SD status

Definition at line 274 of file stm324xg_eval_sd.c.

References MSD_ERROR, MSD_OK, and uSdHandle.

uint8_t BSP_SD_WriteBlocks_DMA	(	uint32_t *	pData,
		uint64_t	WriteAddr,
		uint32_t	BlockSize,
		uint32_t	NumOfBlocks
	)

Writes block(s) to a specified address in an SD card, in DMA mode.

Parameters:

pData,:	Pointer to the buffer that will contain the data to transmit
WriteAddr,:	Address from where data is to be written
BlockSize,:	SD card data block size, that should be 512
NumOfBlocks,:	Number of SD blocks to write

Return values:

SD status

Definition at line 328 of file stm324xg_eval_sd.c.

References MSD_ERROR, MSD_OK, SD_DATATIMEOUT, and uSdHandle.

STM324xG_EVAL BSP User Manual: STM324xG EVAL SD Exported Functions

STM3240G / STM3241G EVAL BSP Drivers

Functions

Function Documentation

Get in touch