STM32469I_EVAL BSP User Manual: STM32469I EVAL BSP Public Functions

STM32469I EVAL BSP Drivers

STM32469I_EVAL BSP User Manual
STM32469I EVAL BSP Public Functions

Functions

uint32_t BSP_GetVersion (void)
 This method returns the STM32469I EVAL BSP Driver revision.
void BSP_LED_Init (Led_TypeDef Led)
 Configures LED GPIO.
void BSP_LED_DeInit (Led_TypeDef Led)
 DeInit LEDs.
void BSP_LED_On (Led_TypeDef Led)
 Turns selected LED On.
void BSP_LED_Off (Led_TypeDef Led)
 Turns selected LED Off.
void BSP_LED_Toggle (Led_TypeDef Led)
 Toggles the selected LED.
void BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Button_Mode)
 Configures button GPIO and EXTI Line.
void BSP_PB_DeInit (Button_TypeDef Button)
 Push Button DeInit.
uint32_t BSP_PB_GetState (Button_TypeDef Button)
 Returns the selected button state.
void BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *huart)
 Configures COM port.
void BSP_COM_DeInit (COM_TypeDef COM, UART_HandleTypeDef *huart)
 DeInit COM port.

Function Documentation

void BSP_COM_DeInit ( COM_TypeDef  COM,
UART_HandleTypeDef *  huart 
)

DeInit COM port.

Parameters:
COM,:COM port to be configured. This parameter can be one of the following values:
  • COM1
  • COM2
huart,:Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified USART peripheral.

Definition at line 506 of file stm32469i_eval.c.

References COM_USART, and EVAL_COMx_CLK_DISABLE.

void BSP_COM_Init ( COM_TypeDef  COM,
UART_HandleTypeDef *  huart 
)

Configures COM port.

Parameters:
COM,:COM port to be configured. This parameter can be one of the following values:
  • COM1
  • COM2
huart,:Pointer to a UART_HandleTypeDef structure that contains the configuration information for the specified USART peripheral.

Definition at line 470 of file stm32469i_eval.c.

References COM_RX_PIN, COM_RX_PORT, COM_TX_AF, COM_TX_PIN, COM_TX_PORT, COM_USART, EVAL_COMx_CLK_ENABLE, and EVAL_COMx_TX_RX_GPIO_CLK_ENABLE.

uint32_t BSP_GetVersion ( void  )

This method returns the STM32469I EVAL BSP Driver revision.

Return values:
version,:0xXYZR (8bits for each decimal, R for RC)

Definition at line 211 of file stm32469i_eval.c.

References __STM32469I_EVAL_BSP_VERSION.

void BSP_LED_DeInit ( Led_TypeDef  Led)

DeInit LEDs.

Parameters:
Led,:LED to be configured. This parameter can be one of the following values:
  • LED1
  • LED2
  • LED3
  • LED4
Note:
Led DeInit does not disable the GPIO clock nor disable the Mfx

Definition at line 272 of file stm32469i_eval.c.

References BSP_IO_ConfigPin(), GPIO_PIN, LED4, and LEDx_GPIO_PORT.

void BSP_LED_Init ( Led_TypeDef  Led)

Configures LED GPIO.

Parameters:
Led,:LED to be configured. This parameter can be one of the following values:
  • LED1
  • LED2
  • LED3
  • LED4

Definition at line 225 of file stm32469i_eval.c.

References BSP_IO_ConfigPin(), BSP_IO_Init(), BSP_IO_PIN_SET, BSP_IO_WritePin(), GPIO_PIN, LED4, LEDx_GPIO_CLK_ENABLE, and LEDx_GPIO_PORT.

void BSP_LED_Off ( Led_TypeDef  Led)

Turns selected LED Off.

Parameters:
Led,:LED to be set off This parameter can be one of the following values:
  • LED1
  • LED2
  • LED3
  • LED4

Definition at line 332 of file stm32469i_eval.c.

References BSP_IO_PIN_SET, BSP_IO_WritePin(), GPIO_PIN, LED4, and LEDx_GPIO_PORT.

void BSP_LED_On ( Led_TypeDef  Led)

Turns selected LED On.

Parameters:
Led,:LED to be set on This parameter can be one of the following values:
  • LED1
  • LED2
  • LED3
  • LED4

Definition at line 304 of file stm32469i_eval.c.

References BSP_IO_PIN_RESET, BSP_IO_WritePin(), GPIO_PIN, LED4, and LEDx_GPIO_PORT.

void BSP_LED_Toggle ( Led_TypeDef  Led)

Toggles the selected LED.

Parameters:
Led,:LED to be toggled This parameter can be one of the following values:
  • LED1
  • LED2
  • LED3
  • LED4

Definition at line 359 of file stm32469i_eval.c.

References BSP_IO_TogglePin(), GPIO_PIN, LED4, and LEDx_GPIO_PORT.

void BSP_PB_DeInit ( Button_TypeDef  Button)

Push Button DeInit.

Parameters:
Button,:Button to be configured This parameter can be one of the following values:
  • BUTTON_WAKEUP: Wakeup Push Button
  • BUTTON_TAMPER: Tamper Push Button
Note:
PB DeInit does not disable the GPIO clock

Definition at line 438 of file stm32469i_eval.c.

References BUTTON_IRQn, BUTTON_PIN, and BUTTON_PORT.

uint32_t BSP_PB_GetState ( Button_TypeDef  Button)

Returns the selected button state.

Parameters:
Button,:Button to be checked This parameter can be one of the following values:
  • BUTTON_WAKEUP: Wakeup Push Button
  • BUTTON_TAMPER: Tamper Push Button
Return values:
TheButton GPIO pin value

Definition at line 456 of file stm32469i_eval.c.

References BUTTON_PIN, and BUTTON_PORT.

void BSP_PB_Init ( Button_TypeDef  Button,
ButtonMode_TypeDef  Button_Mode 
)

Configures button GPIO and EXTI Line.

Parameters:
Button,:Button to be configured This parameter can be one of the following values:
  • BUTTON_WAKEUP: Wakeup Push Button
  • BUTTON_TAMPER: Tamper Push Button
Button_Mode,:Button mode This parameter can be one of the following values:
  • BUTTON_MODE_GPIO: Button will be used as simple IO
  • BUTTON_MODE_EXTI: Button will be connected to EXTI line with interrupt generation capability

Definition at line 389 of file stm32469i_eval.c.

References BUTTON_IRQn, BUTTON_MODE_EXTI, BUTTON_MODE_GPIO, BUTTON_PIN, BUTTON_PORT, BUTTON_WAKEUP, and BUTTONx_GPIO_CLK_ENABLE.

Generated on Tue Jan 12 2016 17:51:25 for STM32469I_EVAL BSP User Manual by   doxygen 1.7.6.1