Defines
#define	BUTTONn 3
#define	TAMPER_BUTTON_PIN GPIO_PIN_13 /* PC.13*/
	Tamper push-button.
#define	TAMPER_BUTTON_GPIO_PORT GPIOC
#define	TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define	TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define	TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
#define	KEY_BUTTON_PIN GPIO_PIN_9 /* PB.09*/
	Key push-button.
#define	KEY_BUTTON_GPIO_PORT GPIOB
#define	KEY_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define	KEY_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define	KEY_BUTTON_EXTI_IRQn EXTI9_5_IRQn
#define	WAKEUP_BUTTON_PIN GPIO_PIN_0 /* PA.00*/
	Wake-up push-button.
#define	WAKEUP_BUTTON_GPIO_PORT GPIOA
#define	WAKEUP_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
#define	WAKEUP_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE()
#define	WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn
#define	BUTTONx_GPIO_CLK_ENABLE(__BUTTON__)
#define	BUTTONx_GPIO_CLK_DISABLE(__BUTTON__)
#define	JOY_SEL_PIN (IO2_PIN_7) /* IO_Expander_2 */
	IO Pins definition.
#define	JOY_DOWN_PIN (IO2_PIN_6) /* IO_Expander_2 */
#define	JOY_LEFT_PIN (IO2_PIN_5) /* IO_Expander_2 */
#define	JOY_RIGHT_PIN (IO2_PIN_4) /* IO_Expander_2 */
#define	JOY_UP_PIN (IO2_PIN_3) /* IO_Expander_2 */
#define	JOY_NONE_PIN JOY_ALL_PINS
#define	JOY_ALL_PINS (JOY_SEL_PIN \| JOY_DOWN_PIN \| JOY_LEFT_PIN \| JOY_RIGHT_PIN \| JOY_UP_PIN)
#define	MEMS_INT1_PIN (IO1_PIN_3) /* IO_Expander_1 / / Input */
#define	MEMS_INT2_PIN (IO1_PIN_2) /* IO_Expander_1 / / Input */
#define	MEMS_ALL_PINS (MEMS_INT1_PIN \| MEMS_INT2_PIN)
#define	AUDIO_RESET_PIN (IO2_PIN_2) /* IO_Expander_2 / / Output */
#define	MII_INT_PIN (IO2_PIN_0) /* IO_Expander_2 / / Output */
#define	VBAT_DIV_PIN (IO1_PIN_0) /* IO_Expander_1 / / Output */

Define Documentation

#define AUDIO_RESET_PIN (IO2_PIN_2) /* IO_Expander_2 */ /* Output */

Definition at line 245 of file stm3210c_eval.h.

Referenced by AUDIO_IO_Init(), and BSP_AUDIO_OUT_Stop().

#define BUTTONn 3

Definition at line 191 of file stm3210c_eval.h.

#define BUTTONx_GPIO_CLK_DISABLE ( __BUTTON__ )

Value:

(((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_DISABLE()  :\
                                                 ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_DISABLE()  :\
                                                 ((__BUTTON__) == BUTTON_WAKEUP) WAKEUP_BUTTON_GPIO_CLK_DISABLE()  : 0 )

Definition at line 224 of file stm3210c_eval.h.

#define BUTTONx_GPIO_CLK_ENABLE ( __BUTTON__ )

Value:

do { if ((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_ENABLE()  ; else \
                                                 if ((__BUTTON__) == BUTTON_KEY) KEY_BUTTON_GPIO_CLK_ENABLE()  ; else \
                                                 if ((__BUTTON__) == BUTTON_WAKEUP) WAKEUP_BUTTON_GPIO_CLK_ENABLE();} while(0)

Definition at line 220 of file stm3210c_eval.h.

Referenced by BSP_PB_Init().