|
STM3210C_EVAL BSP User Manual
|
This file contains all the functions prototypes for the stm3210c_eval_eeprom.c firmware driver. More...
#include "stm3210c_eval.h"
Go to the source code of this file.
Data Structures | |
| struct | EEPROM_DrvTypeDef |
Defines | |
| #define | EEPROM_ADDRESS_M24C64_32 0xA0 /* Support the devices: M24C32 and M24C64 */ |
| #define | EEPROM_ADDRESS_M24C08_BLOCK0 0xA0 |
| #define | EEPROM_ADDRESS_M24C08_BLOCK1 0xA2 |
| #define | EEPROM_ADDRESS_M24C08_BLOCK2 0xA4 |
| #define | EEPROM_ADDRESS_M24C08_BLOCK3 0xA6 |
| #define | EEPROM_PAGESIZE_M24C64_32 32 /* Support the devices: M24C32 and M24C64 */ |
| #define | EEPROM_PAGESIZE_M24C08 16 /* Support the device: M24C08. */ |
| #define | EEPROM_OK 0 |
| #define | EEPROM_FAIL 1 |
| #define | EEPROM_TIMEOUT 2 |
| #define | BSP_EEPROM_M24C64_32 1 /* RF I2C EEPROM M24C32 and M24C64 */ |
| #define | BSP_EEPROM_M24C08 2 /* RF I2C EEPROM M24C08 */ |
| #define | EEPROM_MAX_TRIALS 300 |
Functions | |
| uint32_t | BSP_EEPROM_Init (void) |
| Initializes peripherals used by the EEPROM device selected. | |
| void | BSP_EEPROM_SelectDevice (uint8_t DeviceID) |
| Select the EEPROM device to communicate. | |
| uint32_t | BSP_EEPROM_ReadBuffer (uint8_t *pBuffer, uint16_t ReadAddr, uint32_t *NumByteToRead) |
| Reads a block of data from the EEPROM device selected. | |
| uint32_t | BSP_EEPROM_WriteBuffer (uint8_t *pBuffer, uint16_t WriteAddr, uint32_t NumByteToWrite) |
| Writes buffer of data to the EEPROM device selected. | |
| __weak void | BSP_EEPROM_TIMEOUT_UserCallback (void) |
| Basic management of the timeout situation. | |
| void | EEPROM_I2C_IO_Init (void) |
| Initializes peripherals used by the I2C EEPROM driver. | |
| HAL_StatusTypeDef | EEPROM_I2C_IO_WriteData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize) |
| Write data to I2C EEPROM driver. | |
| HAL_StatusTypeDef | EEPROM_I2C_IO_ReadData (uint16_t DevAddress, uint16_t MemAddress, uint8_t *pBuffer, uint32_t BufferSize) |
| Read data from I2C EEPROM driver. | |
| HAL_StatusTypeDef | EEPROM_I2C_IO_IsDeviceReady (uint16_t DevAddress, uint32_t Trials) |
| Checks if target device is ready for communication. | |
Detailed Description
This file contains all the functions prototypes for the stm3210c_eval_eeprom.c firmware driver.
- Attention:
© COPYRIGHT(c) 2015 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm3210c_eval_eeprom.h.
Generated on Thu Dec 10 2015 17:13:52 for STM3210C_EVAL BSP User Manual by
1.7.6.1