|
STM32072B_EVAL BSP User Manual
|
stm32072b_eval.h File Reference
This file contains definitions for STM32072B_EVAL's Leds, push-buttons and COM port hardware resources. More...
#include "stm32f0xx_hal.h"
Go to the source code of this file.
Defines | |
| #define | LEDn 4 |
| #define | LED1_PIN GPIO_PIN_8 |
| #define | LED1_GPIO_PORT GPIOD |
| #define | LED1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED2_PIN GPIO_PIN_9 |
| #define | LED2_GPIO_PORT GPIOD |
| #define | LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED3_PIN GPIO_PIN_10 |
| #define | LED3_GPIO_PORT GPIOD |
| #define | LED3_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED3_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LED4_PIN GPIO_PIN_11 |
| #define | LED4_GPIO_PORT GPIOD |
| #define | LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | LEDx_GPIO_CLK_ENABLE(__LED__) |
| #define | LEDx_GPIO_CLK_DISABLE(__LED__) |
| #define | JOYn 5 |
| #define | BUTTONn 1 |
| #define | TAMPER_BUTTON_PIN GPIO_PIN_13 |
| Tamper push-button. | |
| #define | TAMPER_BUTTON_GPIO_PORT GPIOC |
| #define | TAMPER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() |
| #define | TAMPER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() |
| #define | TAMPER_BUTTON_EXTI_IRQn EXTI4_15_IRQn |
| #define | TAMPERx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_TAMPER) TAMPER_BUTTON_GPIO_CLK_ENABLE();} while(0) |
| #define | TAMPERx_GPIO_CLK_DISABLE(__BUTTON__) (((__BUTTON__) == BUTTON_TAMPER) ? TAMPER_BUTTON_GPIO_CLK_DISABLE(): 0 ) |
| #define | RIGHT_JOY_PIN GPIO_PIN_3 |
| Joystick Right push-button. | |
| #define | RIGHT_JOY_GPIO_PORT GPIOE |
| #define | RIGHT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | RIGHT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | RIGHT_JOY_EXTI_IRQn EXTI2_3_IRQn |
| #define | LEFT_JOY_PIN GPIO_PIN_2 |
| Joystick Left push-button. | |
| #define | LEFT_JOY_GPIO_PORT GPIOE |
| #define | LEFT_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | LEFT_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | LEFT_JOY_EXTI_IRQn EXTI2_3_IRQn |
| #define | UP_JOY_PIN GPIO_PIN_9 |
| Joystick Up push-button. | |
| #define | UP_JOY_GPIO_PORT GPIOF |
| #define | UP_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() |
| #define | UP_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE() |
| #define | UP_JOY_EXTI_IRQn EXTI4_15_IRQn |
| #define | DOWN_JOY_PIN GPIO_PIN_10 |
| Joystick Down push-button. | |
| #define | DOWN_JOY_GPIO_PORT GPIOF |
| #define | DOWN_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() |
| #define | DOWN_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE() |
| #define | DOWN_JOY_EXTI_IRQn EXTI4_15_IRQn |
| #define | SEL_JOY_PIN GPIO_PIN_0 |
| Joystick Sel push-button. | |
| #define | SEL_JOY_GPIO_PORT GPIOA |
| #define | SEL_JOY_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() |
| #define | SEL_JOY_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() |
| #define | SEL_JOY_EXTI_IRQn EXTI0_1_IRQn |
| #define | JOYx_GPIO_CLK_ENABLE(__JOY__) |
| #define | JOYx_GPIO_CLK_DISABLE(__JOY__) |
| #define | COMn 1 |
| #define | EVAL_COM1 USART2 |
| Definition for COM port1, connected to USART2. | |
| #define | EVAL_COM1_CLK_ENABLE() __HAL_RCC_USART2_CLK_ENABLE() |
| #define | EVAL_COM1_CLK_DISABLE() __HAL_RCC_USART2_CLK_DISABLE() |
| #define | EVAL_COM1_TX_PIN GPIO_PIN_5 |
| #define | EVAL_COM1_TX_GPIO_PORT GPIOD |
| #define | EVAL_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | EVAL_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | EVAL_COM1_TX_AF GPIO_AF0_USART2 |
| #define | EVAL_COM1_RX_PIN GPIO_PIN_6 |
| #define | EVAL_COM1_RX_GPIO_PORT GPIOD |
| #define | EVAL_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | EVAL_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | EVAL_COM1_RX_AF GPIO_AF0_USART2 |
| #define | EVAL_COM1_CTS_PIN GPIO_PIN_3 |
| #define | EVAL_COM1_CTS_GPIO_PORT GPIOD |
| #define | EVAL_COM1_CTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | EVAL_COM1_CTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | EVAL_COM1_CTS_AF GPIO_AF0_USART2 |
| #define | EVAL_COM1_RTS_PIN GPIO_PIN_4 |
| #define | EVAL_COM1_RTS_GPIO_PORT GPIOD |
| #define | EVAL_COM1_RTS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | EVAL_COM1_RTS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | EVAL_COM1_RTS_AF GPIO_AF0_USART2 |
| #define | EVAL_COM1_IRQn USART2_IRQn |
| #define | COMx_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CLK_ENABLE();} while(0) |
| #define | COMx_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CLK_DISABLE() : 0) |
| #define | COMx_TX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_TX_GPIO_CLK_ENABLE();} while(0) |
| #define | COMx_TX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_TX_GPIO_CLK_DISABLE() : 0) |
| #define | COMx_RX_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RX_GPIO_CLK_ENABLE();} while(0) |
| #define | COMx_RX_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RX_GPIO_CLK_DISABLE() : 0) |
| #define | COMx_CTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_CTS_GPIO_CLK_ENABLE();} while(0) |
| #define | COMx_CTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_CTS_GPIO_CLK_DISABLE() : 0) |
| #define | COMx_RTS_GPIO_CLK_ENABLE(__COM__) do { if((__COM__) == COM1) EVAL_COM1_RTS_GPIO_CLK_ENABLE();} while(0) |
| #define | COMx_RTS_GPIO_CLK_DISABLE(__COM__) (((__COM__) == COM1) ? EVAL_COM1_RTS_GPIO_CLK_DISABLE() : 0) |
| #define | EVAL_I2C1 I2C1 |
| #define | EVAL_I2C1_CLK_ENABLE() __HAL_RCC_I2C1_CLK_ENABLE() |
| #define | EVAL_I2C1_CLK_DISABLE() __HAL_RCC_I2C1_CLK_DISABLE() |
| #define | EVAL_I2C1_FORCE_RESET() __HAL_RCC_I2C1_FORCE_RESET() |
| #define | EVAL_I2C1_RELEASE_RESET() __HAL_RCC_I2C1_RELEASE_RESET() |
| #define | EVAL_I2C1_SCL_PIN GPIO_PIN_6 /* PB.6 */ |
| #define | EVAL_I2C1_SDA_PIN GPIO_PIN_7 /* PB.7 */ |
| #define | EVAL_I2C1_GPIO_PORT GPIOB /* GPIOB */ |
| #define | EVAL_I2C1_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | EVAL_I2C1_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | EVAL_I2C1_SCL_SDA_AF GPIO_AF1_I2C1 |
| #define | EVAL_I2C2 I2C2 |
| #define | EVAL_I2C2_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE() |
| #define | EVAL_I2C2_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE() |
| #define | EVAL_I2C2_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET() |
| #define | EVAL_I2C2_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET() |
| #define | EVAL_I2C2_SCL_PIN GPIO_PIN_13 /* PB.13 */ |
| #define | EVAL_I2C2_SDA_PIN GPIO_PIN_14 /* PB.14 */ |
| #define | EVAL_I2C2_GPIO_PORT GPIOB /* GPIOB */ |
| #define | EVAL_I2C2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | EVAL_I2C2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | EVAL_I2C2_AF GPIO_AF5_I2C2 |
| #define | EVAL_I2C2_IRQn I2C2_IRQn |
| #define | EVAL_I2C1_TIMEOUT_MAX 1000 |
| #define | EVAL_I2C2_TIMEOUT_MAX 1000 |
| #define | I2C2_TIMING 0x00E0D3FF |
| #define | I2C1_TIMING 0x00E0D3FF |
| #define | EVAL_SPIx SPI1 |
| Definition for SPI Interface pins (SPI1 used) | |
| #define | EVAL_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() |
| #define | EVAL_SPIx_CLK_DISABLE() __HAL_RCC_SPI1_CLK_DISABLE() |
| #define | EVAL_SPIx_FORCE_RESET() __HAL_RCC_SPI1_FORCE_RESET() |
| #define | EVAL_SPIx_RELEASE_RESET() __HAL_RCC_SPI1_RELEASE_RESET() |
| #define | EVAL_SPIx_SCK_PIN GPIO_PIN_3 /* PB.03 */ |
| #define | EVAL_SPIx_SCK_GPIO_PORT GPIOB /* GPIOB */ |
| #define | EVAL_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | EVAL_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | EVAL_SPIx_SCK_AF GPIO_AF0_SPI1 |
| #define | EVAL_SPIx_MISO_PIN GPIO_PIN_14 /* PE.14 */ |
| #define | EVAL_SPIx_MISO_GPIO_PORT GPIOE /* GPIOE */ |
| #define | EVAL_SPIx_MISO_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | EVAL_SPIx_MISO_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | EVAL_SPIx_MISO_AF GPIO_AF1_SPI1 |
| #define | EVAL_SPIx_MOSI_PIN GPIO_PIN_15 /* PE.15 */ |
| #define | EVAL_SPIx_MOSI_GPIO_PORT GPIOE /* GPIOE */ |
| #define | EVAL_SPIx_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | EVAL_SPIx_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | EVAL_SPIx_MOSI_AF GPIO_AF1_SPI1 |
| #define | EVAL_SPIx_MOSI_DIR_PIN GPIO_PIN_2 /* PB.02 */ |
| #define | EVAL_SPIx_MOSI_DIR_GPIO_PORT GPIOB /* GPIOB */ |
| #define | EVAL_SPIx_MOSI_DIR_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | EVAL_SPIx_MOSI_DIR_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | EVAL_SPIx_TIMEOUT_MAX 1000 |
| #define | LCD_CS_LOW() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_RESET) |
| #define | LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_NCS_GPIO_PORT, LCD_NCS_PIN, GPIO_PIN_SET) |
| #define | LCD_NCS_PIN GPIO_PIN_6 /* PE. 06*/ |
| LCD Control pins. | |
| #define | LCD_NCS_GPIO_PORT GPIOE /* GPIOE */ |
| #define | LCD_NCS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | LCD_NCS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) |
| #define | SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) |
| #define | SD_CS_PIN GPIO_PIN_2 /* PF.2 */ |
| SD card Control pin. | |
| #define | SD_CS_GPIO_PORT GPIOF /* GPIOF */ |
| #define | SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() |
| #define | SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE() |
| #define | SD_DETECT_PIN GPIO_PIN_15 /* PB.15 */ |
| SD Detect Interface pins. | |
| #define | SD_DETECT_GPIO_PORT GPIOB /* GPIOB */ |
| #define | SD_DETECT_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | SD_DETECT_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | SD_DETECT_EXTI_IRQn EXTI4_15_IRQn |
| #define | HDMI_CEC_HPD_SINK_PIN GPIO_PIN_15 /* PD.15 */ |
| I2C HDMI CEC Interface pins. | |
| #define | HDMI_CEC_HPD_SINK_GPIO_PORT GPIOD |
| #define | HDMI_CEC_HPD_SINK_CLK_ENABLE() __HAL_RCC_GPIOD_CLK_ENABLE() |
| #define | HDMI_CEC_HPD_SINK_CLK_DISABLE() __HAL_RCC_GPIOD_CLK_DISABLE() |
| #define | HDMI_CEC_HPD_SOURCE_PIN GPIO_PIN_0 /* PE.0 */ |
| #define | HDMI_CEC_HPD_SOURCE_GPIO_PORT GPIOE |
| #define | HDMI_CEC_HPD_SOURCE_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE() |
| #define | HDMI_CEC_HPD_SOURCE_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE() |
| #define | HDMI_CEC_LINE_PIN GPIO_PIN_8 /* PB.8 */ |
| #define | HDMI_CEC_LINE_GPIO_PORT GPIOB |
| #define | HDMI_CEC_LINE_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() |
| #define | HDMI_CEC_LINE_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() |
| #define | HDMI_CEC_LINE_AF GPIO_AF0_CEC |
| #define | HDMI_CEC_IRQn CEC_CAN_IRQn |
| #define | HDMI_CEC_I2C_ADDRESS 0xA0 |
Enumerations | |
| enum | Led_TypeDef { LED1 = 0, LED2 = 1, LED3 = 2, LED4 = 3, LED_GREEN = LED1, LED_ORANGE = LED2, LED_RED = LED3, LED_BLUE = LED4 } |
| LED Types Definition. More... | |
| enum | Button_TypeDef { BUTTON_TAMPER = 0 } |
| BUTTON Types Definition. More... | |
| enum | ButtonMode_TypeDef { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } |
| enum | JOYState_TypeDef { JOY_SEL = 0, JOY_DOWN = 1, JOY_LEFT = 2, JOY_RIGHT = 3, JOY_UP = 4, JOY_NONE = 5 } |
| JOYSTICK Types Definition. More... | |
| enum | JOYMode_TypeDef { JOY_MODE_GPIO = 0, JOY_MODE_EXTI = 1 } |
| enum | COM_TypeDef { COM1 = 0 } |
| COM Types Definition. More... | |
Functions | |
| uint32_t | BSP_GetVersion (void) |
| This method returns the STM32F072B EVAL BSP Driver revision. | |
| void | BSP_LED_Init (Led_TypeDef Led) |
| Configures LED GPIO. | |
| void | BSP_LED_On (Led_TypeDef Led) |
| Turns selected LED On. | |
| void | BSP_LED_Off (Led_TypeDef Led) |
| Turns selected LED Off. | |
| void | BSP_LED_Toggle (Led_TypeDef Led) |
| Toggles the selected LED. | |
| void | BSP_PB_Init (Button_TypeDef Button, ButtonMode_TypeDef Mode) |
| Configures Tamper Button GPIO or EXTI Line. | |
| uint32_t | BSP_PB_GetState (Button_TypeDef Button) |
| Returns the selected button state. | |
| uint8_t | BSP_JOY_Init (JOYMode_TypeDef Joy_Mode) |
| Configures joystick GPIO and EXTI modes. | |
| JOYState_TypeDef | BSP_JOY_GetState (void) |
| Returns the current joystick status. | |
| void | BSP_COM_Init (COM_TypeDef COM, UART_HandleTypeDef *huart) |
| Configures COM port. | |
Detailed Description
This file contains definitions for STM32072B_EVAL's Leds, push-buttons and COM port hardware resources.
- Attention:
© COPYRIGHT(c) 2016 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file stm32072b_eval.h.
Generated on Wed Jul 5 2017 08:56:10 for STM32072B_EVAL BSP User Manual by
1.7.6.1